Stepstick Drv8825 Stepper Motor Drivers of 2025
Best Choice1
Shutao8Pcs DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer RepRap 4 RAMPS1.4 StepStick A4988
Main highlights- The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
- The DRV8825 module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
- The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
- Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step, interface directly with 3.3 V and 5 V systems, 4 Layer 2 oz copper PCB, in order to improve heat dissipation
- DRV8825 stepper motor driver module adjustable current control lets you set a potentiometer, which lets you use the stepper motor's rated voltage or more, in order to achieve a higher rate of maximum output current step
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DIANNDIANN 6pcs DRV8825 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap CNC Machine Robotics
Main highlights- Wide Application:DRV8825 Stepper Motor Drive Module is Compatible With Stepper Motor/ 3D Printer/ CNC/ Engraving Machine/ Supported 3D Printer and etc.
- Protection Function: DRV8825 Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection and Crossing Current Protection
- Easy to Operate: DRV88258 Stepstick is a Complete Micro-Stepping Motor Driver with a Built-in Converter, Easy to Operate; When Micro-Stepping is Running, the Chopper Control Compatible with A4988 Can Automatically Select the Current Decay Mode, Slow or Mixed
- DRV8825 Stepper Motor Drive Modules:Driving Current: 2.5A; Segmentation: 1, 1/2, 1/4, 1/8, 1/16, 1/32;Manufacturing Process: SMT SMT Mechanism, Non Manual Welding, High Yield, Stable Performance
- Advantages: 1. Current up to: 2.5A ; 4-Layer PCB Board, Better Heat Dissipation Performance and The Internal Resistance of the Chip is Smaller, the Heat Generation is Low, and the Heat Dissipation is Good
9.8Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick
Main highlights- Simple step and direction control interface
- DRV8825 Stepper Motor Driver Module
- Can interface directly with 3.3 V and 5 V systems
- 45 V maximum supply voltage
- 4-layer, 2 oz copper PCB for improved heat dissipation
9.6Exceptional
View offer on:
Show more
4
Teyleten RobotTeyleten Robot 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs)
Main highlights- Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection
- Six Different Steps Resolution: The Whole Step, Half Step, 1/4-Step1 / 8-Step1 / 16-Step, 1/32-Step
- Simple Steps And Direction Control Interface
- CAN Interface Directly With 3.3V And 5V Systems
- 4 Layer 2 Ounces Of Copper PCB, In Order To Improve Heat Dissipation
9.4Excellent
View offer on:
Show more
5
DaFuRuiDaFuRui 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer Ramps 1.4 StepStick+Heat Sink
Main highlights- ★【Technical Specifications】 DRV8825 module include input voltage range, maximum drive current, and microstepping resolution settings. It is compatibility with popular development platforms like Arduino.
- ★【Special Features】 It have features like overcurrent protection, overheat protection, and low-power consumption. These special features contribute to the safety and reliability of the system.
- ★【Multiple modes】Six different step resolutions: full step, half step, 1/4-step1/8-step 1/16-step, 1/32-step
- ★【Function Description】 The DRV8825 module is a high-performance stepper motor driver designed for controlling bipolar stepper motors. It provides precise step control and has a high current driving capability.
- ★【Application Areas】It can be used in 3D printers, robots, CNC machines, and other applications that require precise stepper motor control.
9.2Excellent
View offer on:
Show more
6
EC BuyingEC Buying DRV8825 Stepper Driver, DRV8825 Stepper Motor Driver Module for 3D Printer Stepper Driver 4-Layer PCB Board, Send Heat Sink(5PCS)
Main highlights- Suitable for projects: need to drive stepper motor occasions. Is to build 3d printer, CNC, engraving machine and other modules. Support 3 d printers have PrusaMendel ultimaker, printbot, makerbot, etc.
- Module parameters:①Size :1.5cmX2cm (same as 4988)②Driving current: 2.5a③Segmentation: 1, 1/2, 1/4, 1/8, 1/16, 1/32④Manufacturing process: SMT SMT mechanism, non manual welding, high yield, stable performance
- DRV8825 stepper motor driver module is a 3D printer accessory DRV8825 stepper motor driver. The driver has a maximum output capacity of 45 V and ±2.5A. It can run bipolar stepper motors in full step, 1/2, 1/4, 1/8, 1/16 and 1/32 step mode. This driver module is commonly used in robotics, ATM and office automation machines.
- Compared to A4988 features advantages: 1. Current up to: 2.5A 2. Support up to: 32 subdivisions 3, 4-layer PCB board, better heat dissipation performance. 4. The internal resistance of the chip is smaller, the heat generation is low, and the heat dissipation is good.
- Applications: ATMs, money processors, video surveillance cameras, printers, scanners, office automation machines, factory automation, robotics
9.1Excellent
View offer on:
Show more
7
JESSINIEJESSINIE 3pcs DRV8825 Stepper Motor Driver Module for 3D Printer CNC RepRap RAMPS 1.4 Compatible with Arduino StepStick
Main highlights- **Versatile Compatibility:** Seamlessly integrate with both 3.3V and 5V systems, making it Well-suited for your Arduino, 3D Printer, or CNC projects, without the need for additional logic voltage supplies.
- **User-Friendly Design:** Easily replace your A4988 stepper motor driver with our DRV8825 module, offering adjustable current control for higher step rates, and a solderable ground pad for convenient installation.
- **Safety & Protection:** Built-in overcurrent, overtemperature, and short-to-ground protections provide peace of mind, safeguarding your projects from potential damage.
- **Precision & Control:** Achieve precise motor control with six microstepping resolutions, down to 1/32-step, allowing for smooth and accurate movements in your applications.
- **Efficient Performance & Heat Management:** Experience high-performance stepper motor control with our DRV8825 module, featuring a 45V maximum supply and 4-layer copper PCB for enhanced heat dissipation, ensuring long-lasting and reliable operation.
8.9Very Good
View offer on:
Show more
8
HiLetgoHiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Main highlights- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and ± 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
8.7Very Good
View offer on:
Show more
9
FIYAIIVVERR DRV8825 StepStick Stepper Motor Driver 4layer PCB w Heat Sink ( DRV8825 StepStick Stepper Motor Driver 4layer PCB w Disipador de calor
Main highlights- Total Size: 20 x 15mm(L*W); Heat Sink Size: 9 x 9 x 5mm (Tamaño total: 20 x 15 mm (L * W); Tamaño de
- Power Voltage: 3.3V or 5V; Maximum Supply Voltage: 45 V
- Package Content: 1 x Stepper Motor Driver Module w Heatsink; Brand:
- Model: DRV8825; Main Color: Purple, Black
- Country of Manufacture: CHINA; Material: Plastic, Electronic Part; Net Weight: 4g
8.5Good
View offer on:
Show more
10
PodazzPodazz 6Pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick with Heat Sink
Main highlights- 【Working Voltage】8.2~45V
- 【Support Six different step resolutions】full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
- 【Protection】Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection.
- 【Improve Heat Dissipation】4 Layer 2 Ounces Of Copper PCB.
- 【CAN Interface】Directly With 3.3V And 5V Systems.
8.4Good
View offer on:
Show more
Similar products on Amazon
