3d Printer Interface Driver Modules of 2025
Best Choice1
DORHEA6PCS TMC2208 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro
Main highlights- With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
- The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
- The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).
- TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
- Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Hyuduo3D Printer Build Plate 220x240mm Double Sided PEI Magnetic Rubber Spring Steel Magnetic Print Bed Plate Sticker Adhesive for 3D Printer Interface Driver Modules Accessories
Main highlights- The Using Tip: The PEI plate is made of spring steel and strong magnetic base. The magnetic base is adhered to the build plate by tearing off the backing paper, and then align the steel plate. The side with PEI is upwards for printing. Please remove the protective film from the appearance before printing.
- PEI Side: Both sides are evenly sprayed with PEI coating, so both side can be used for printing, which will simplify your printing.
- Match: This 220 x 240mm build plate suits for ANYCUBIC I3 MEGA, and please make sure it is compatible with your printer .
- Good Printing: Your printed work piece can be easily fixed on the print appearance, and the flexible plate also makes the removal very easy.
- Efficient Use: Having been equipped with this PEI build plate, you will find your 3D printing have higher working efficiency and effect.
9.8Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Main highlights- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and ± 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
9.6Exceptional
View offer on:
Show more
4
DORHEA2PCS TMC2208 V1.2 3D Printer Stepper Motor Driver, Upgrade TMC2208 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap MKS Prusa i3 Ender-3 Pro
Main highlights- With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
- The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
- The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).
- TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
- Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
9.4Excellent
View offer on:
Show more
5
WWZMDiBWWZMDiB 3 Pcs Stepper Motor Driver Module for DRV8825 3D Printer
Main highlights- Working Voltage: 8.2~45V
- Working Current: 2.5A （MAX）
- Support short circuit, overheat protection
- Support Six different step resolutions: Full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Stepper Motor Driver Module: With over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout function .More stable than A4988
9.3Excellent
View offer on:
Show more
6
HiLetgoHiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick
Main highlights- Simple step and direction control interface
- DRV8825 Stepper Motor Driver Module
- Can interface directly with 3.3 V and 5 V systems
- 45 V maximum supply voltage
- 4-layer, 2 oz copper PCB for improved heat dissipation
9.1Excellent
View offer on:
Show more
7
EC BuyingEC Buying DRV8825 Stepper Driver, DRV8825 Stepper Motor Driver Module for 3D Printer Stepper Driver 4-Layer PCB Board, Send Heat Sink(5PCS)
Main highlights- Suitable for projects: need to drive stepper motor occasions. Is to build 3d printer, CNC, engraving machine and other modules. Support 3 d printers have PrusaMendel ultimaker, printbot, makerbot, etc.
- Module parameters:①Size :1.5cmX2cm (same as 4988)②Driving current: 2.5a③Segmentation: 1, 1/2, 1/4, 1/8, 1/16, 1/32④Manufacturing process: SMT SMT mechanism, non manual welding, high yield, stable performance
- DRV8825 stepper motor driver module is a 3D printer accessory DRV8825 stepper motor driver. The driver has a maximum output capacity of 45 V and ±2.5A. It can run bipolar stepper motors in full step, 1/2, 1/4, 1/8, 1/16 and 1/32 step mode. This driver module is commonly used in robotics, ATM and office automation machines.
- Compared to A4988 features advantages: 1. Current up to: 2.5A 2. Support up to: 32 subdivisions 3, 4-layer PCB board, better heat dissipation performance. 4. The internal resistance of the chip is smaller, the heat generation is low, and the heat dissipation is good.
- Applications: ATMs, money processors, video surveillance cameras, printers, scanners, office automation machines, factory automation, robotics
9.0Excellent
View offer on:
Show more
8
DORHEA4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro
Main highlights- With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
- The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
- The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).
- TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
- Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
8.8Very Good
View offer on:
Show more
9
hiBCTR5 Pieces of A4988 Stepper Motor Driver Modules with Heat Sinks, Suitable for 3D Printer Reprints, Applicable to Mendel, Huxley and Arduino.
Main highlights- Step Resolution Options Offers five different step resolutions: full step, half step, quarter step, eighth step, and sixteenth step, providing flexible motion control.
- Protection Mechanisms Incorporates intelligent chopping control that can automatically select the correct current decay mode (fast decay or slow decay), along with over-temperature shutdown, under-voltage lockout, and cross-current protection to ensure safe and reliable operation.
- Output Drive Capability The output drive capacity reaches up to 35 V and ± 1.2 A, enabling it to power a wide range of devices.
- Control Interface and Precautions It features a simple step and direction control interface. Before using the A4988 module, anti-static measures should be taken to prevent short circuits.
- Adjustable Current Control Allows you to set the maximum current output using a potentiometer for customized power management.
8.7Very Good
View offer on:
Show more
10
Photect10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Main highlights- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Five-step resolution: there are 5 steps resolution of the stepper motor drive modules, such as full step, half step, quarter step, eight step, sixteen step, and the output drive capacity is up to 35V and -2A-2A
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
8.5Good
View offer on:
Show more
Similar products on Amazon
