10 Best Hydraulic Metal Bending Machine In The Us - Black Friday 2024
Happybuy Electric Hydraulic Rebar Bender,1700W Desktop Electric Rebar Bender,Bending up to 1 Inch #8 6-25mm Rebar Bending Angle 0-180 Degrees,with Foot Pedal for Bending Steel Rope(1700W RB-25)
Main highlights- Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
- Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
- Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
- 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
- 1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
TECHTONGDATECHTONGDA Electric Pipe Tube Bender Roller Metal Steel Tube Bending Rolling Machine Reversible 3/4''-2-7/8'' Round 4/5''-2-2/5'' Square Arc Pipe Bender with 15 Round ＆ 9 Square Die Sets 220V 2.2KW
Main highlights- ️【Wide Application】The Pipe Tube Bender Machine is suitable for large arc bending of greenhouses, round pipes, semi-circular iron doors and square pipes. It is widely used in the construction of vegetable greenhouses, simple carports and simple workshops.
- ️ The Tube Roller Bender comes with 15 round die set & 9 square die set. Circular tube mold specifications(Unit:mm): 19/22-63/25-151/32-38/76; Square tube mold specifications(Unit:mm): 20-60/25-50/30-40
- ️ The Reversible Metal Bender Machine can able to bend pipes to any radian required. Cold bending without heating or filling in.
- ️ Closed-loop bearing has high precision and no deviation in the same straight line. Easy to operate by using turbo reducer to drive, rolls and bends back and forth.
- ️ Bending tube wall thickness: 0-2mm (0-0.079"), Motor power: 2.2kw(3HP), Voltage: 220V Single phase
9.5Excellent
View offer on:
Show more
3
KASTFORCEKASTFORCE KF5017 Press Brake Attachment Attach to Most Standard 12 to 20 Ton Hydraulic Shop Presses Bending Brake Metal Bending Machine
Main highlights- Max Bending Thickness: 3/16" (5mm)
- Max Bending Length: 12" (305mm)
- Bends up to 90° angles
- Attach to Most Standard 12 to 20 Ton Hydraulic Shop Presses
9.2Excellent
View offer on:
Show more
4
VEVOR30% OffVEVOR YP-9 Manual Bender, 1” - 2“ High Capacity Round Square Bar Metal Bender with 7 Bending Dies, Metal Rod Bar Bender Bending Tool for Construction Site Auto Repair
Main highlights- Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc.
- Sturdy and Durable: High-quality materials and precision manufacturing make the entire bender machine durable and long-lasting.
- High Performance: This manual bender is suitable for bending round and square bars, providing efficient and precise bending for various diameters of round metal bars. It is easy to operate and features a sturdy construction, making it ideal for both industrial and home metalworking projects.
- Energy-saving Structure: The metal bending machine adopts an ergonomic non-slip design long handle, which is comfortable to hold and easy to operate.
- 7 Superior Dies: We provide 7 interchangeable bender dies, ranging from 1" to 3". All these are made of reinforced steel for durable use. The bending heads can meet different usage needs, making your work more convenient.
9.1Excellent
View offer on:
Show more
5
FAHKNS1/2" Hydraulic Pipe Bender 6 Dies (1/2",3/4",1",1-1/4",1-1/2",2") 12 Ton Manual Copper Tubing Bender Tool Adjustable Rollers 90°-180° Steel Iron Metal Ratcheting
Main highlights- 【UNIQUE GEAR DESIGN】The upper end of the hydraulic rod is made of vinyl material, which is comfortable to touch. The gear at the end of the hydraulic rod is used to control the opening and closing, the hydraulic rod is aligned and the bender is raised and lowered. In addition, the stable four-leg design improves the working time and quality of continuous pipe bending.
- 【90-180 ° BENDING】12 Tons of hydraulic conduit bender can be bent in the range of 90-180 degrees of pipe. The pipe bender is suitable for most types of metal pipe and can be used in pipeline construction, construction, pipeline, oil, mining, shipbuilding and other industries.
- 【6 MOLDS AND 6 ADJUSTABLE ROLLER LEVELS】This metal tube casting machine includes 6 precision casting molds for 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2 models; along with 6 adjustable roller levels for bending flat tubes at 180° to different angles.
- 【45 STEEL FRAME】Hydraulic pipe bender can work under any conditions. It is mainly used for pipe laying and repairing in electric power construction, highway and railroad construction, boiler, bridge, ship, furniture, decoration and other fields. Compact design, smooth appearance, wear-resistant, save bending time and labor.
- 【12 TONS: Copper Pipe Bender-Dead Load】12 Ton, Stroke: 5.12 (130 mm), Adjustable Height: 12.9 (330 mm) in Minimum, 18.1 (460 mm) in Maximum, Bending Range: 1/2-2 (1.3-5.1 cm), Diameter: 1/2 (1.3 cm), Oil Capacity: 750g (1.65 lbs).
8.9Very Good
View offer on:
Show more
6
VEVOR21% OffVEVOR Arbor Press, 0.5 Ton Manual Arbor Press, 4.6" Maximum Height, Cast Iron Heavy-duty Manual Desktop Arbor Press, Precision Hand Press for Stamping, Bending, Stretching, Forming
Main highlights- Versatile Molds Included: Comes with three molds: flat drift, pointed drift, and round drift. These molds enable basic deformation and extrusion work. The 0.4-inch ram bore is available for multiple molds, making riveting, cutting, carving, and other tasks possible.
- Fix Items of Different Shapes: Equipped with a 3.5" diameter four-hole steel anvil plate, this desktop arbor press provides precise work assistance and can securely fix items of different shapes and sizes, catering to your diverse needs.
- Effortless Operation: The lengthening lever adopts the labor-saving lever principle, allowing you to exert greater force with less effort. The lever position can be easily adjusted and locked, preventing sliding, while the anti-slip rubber sleeve ensures a secure grip. The gears in the rack are uniform, sturdy, and resistant to wear and jamming.
- Durable Construction: Crafted from high-strength cast iron, this manual arbor press is designed for long-term use without deformation or fracture. The overall anti-rust coating protects against corrosion, and the anvil plate is polished to ensure safety with no sharp edges.
- 0.5 Ton Pressure Capacity: This arbor press delivers a maximum working pressure of 0.5 Ton, max. working stroke: 4.7 inch/119 mm, providing precise control for small processing tasks such as stamping leather, aluminum, jewelry, handicraft production, ID card production, and leather projects.
8.8Very Good
View offer on:
Show more
7
VEVORVEVOR Sheet Metal Brake 36 In. Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees Adjustable Steel Bender with 2 C-shaped Clamps Manual Sheet Metal Bender Tool for Metal Bending
8.0 worth the money8.0 Simple to use8.0 Precision8.6Very Good
View offer on:
Show more
8
CENTALLCENTALL 5/8 Inch Electric Rebar Bender 1100 W Hydraulic Rebar Bending Machine #6-16 mm Rebar within 2-2.5 s Easy Bending Rebar Steel Bar HRB-16 (Grey + Orange)
Main highlights- 【Super performance】Electric Rebar Bender adopts 1100 W pure copper motor with strong power. Low noise and low failure rate when running. It can bend 5/8 inch (#6-16 mm) in just 2-2.5s, which raises your working efficiency greatly.
- 【Solid Body】 Rebar Bending Machine adopts sturdy steel body and high-strength bending block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender.
- 【Exclusive eccentric wheel design】Our bending machine head is designed with an eccentric wheel, which is our exclusive design for bending rebars of different thicknesses. Turning 180°of the eccentric wheel can bend thinner steel bars. With the eccentric wheel, it expands the bending range.
- 【Ergonomic Design】 Back grip handle and front handle designed for comfortable grip and easy operation. Griping the front handle can easily lift the bending machine for high-altitude operations. Safe, stable and effortless.
- 【Easy to Operate】One button operation. Press the switch and the bending block starts to push forward. When reach the angle you want, release the switch. After the rebar is bent, pull the relief valve and piston returns to its original position. Operation process is easy and convenient.
8.3Good
View offer on:
Show more
9
VEVOR20% OffVEVOR Electric Hydraulic Rebar Bender, 1500W Portable Rebar Bending Machine, Bending up to 3/4 Inch #6 (6-20mm) within 4 Seconds, High Power Steel Rebar Bender w/Tool Case Oil Can,Black Blue RN-22
Main highlights- Wide Bending Range: Suitable for bending rebar with diameters from 6 to 20mm. Handles different bending needs with ease, suitable for medium carbon, low carbon, round, and threaded rebar.
- Precise and Fast Bending: The hydraulic electric rebar bender can precisely bend solid rebar within 4-5 seconds, with adjustable bending angles from 0° to 90°. Powered by a 1500W pure copper motor for robust performance.
- Metal Toolbox Included: Comes with a collision-resistant storage toolbox that accommodates the machine and various tools, making it easy to transport and use in different locations.
- Lightweight Construction: Made from lightweight PVC, designed for comfort during extended use. The compact and manageable weight minimizes fatigue even during prolonged operation.
- High-Strength Bending: Upgraded high-strength hooks ensure long-term bending performance. Equipped with a reset button; simply pull the hydraulic valve to safely reset after bending.
8.1Good
View offer on:
Show more
10
LCyinduLCyindu 1500W Electric Hydraulic Rebar Bender Tool, Bending Up To 1 inch #8 25mm Rebar,Bending Angle 0 To 90°, 110V Portable Hand Held Bender Machine for Rod Steel Bar with Metal Storage Box
Main highlights- 【Sturdy Body】: The electric rebar bender adopts a solid body and high-strength hooks, which are stronger and not easy to break. It can withstand super-hard steel bars, has strong clamping force and excellent steel bar bending effect. Multiple screws are fixed on the head, which enhances the safety and stability of the steel bar bending machine
- 【Precision Pressure Relief Valve】: This rebar bender tool features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position
- 【One Button Operation】：Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward
- 【Excellent Performance】: HRB-25 electric steel bar bending machine has strong push and pull capabilities, it can bend steel bars in 5 seconds. Bend or straighten 1-inch #8 25mm steel bars to 90° to meet your various bending needs
- 【Efficient 1500W Pure Copper Motor】: This portable steel bar bending machine uses a 1500W pure copper coil motor, which is powerful, quiet operation, low power consumption, low noise, and longer service life, greatly improving your work efficiency
8.0Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for hydraulic metal bending machine
