10 Best Rebar Cutters Benders In The Us - Black Friday 2024
Happybuy Electric Hydraulic Rebar Bender,1700W Desktop Electric Rebar Bender,Bending up to 1 Inch #8 6-25mm Rebar Bending Angle 0-180 Degrees,with Foot Pedal for Bending Steel Rope(1700W RB-25)
Main highlights- Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
- Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
- Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
- 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
- 1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MarshalltownMARSHALLTOWN Rebar Bender and Cutter Assembly, Concrete, Up to Grade #5 or Grade 60, 54 Inch Steel Handle, 14730
Main highlights- The rugged cast iron cutting tool comes mounted to a wooden board for added rigidity and stability when in use.
- The Rebar Bender/Cutter comes with a 54” steel handle.
- Made in the USA with Global Materials
- MARSHALLTOWN Rebar Bender & Cutter is ideal for curving, angling, and cutting rebar up to #5 (5/8 Inch) or grade 60.
9.6Exceptional
View offer on:
Show more
3
BN ProductsBN Products MBC-16B 1 Manual Bender/Cutter, Orange
Main highlights- Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws
- Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry
- Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry
- Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar
- Adjustable 2-1/2" diameter bending roller
9.4Excellent
View offer on:
Show more
4
H. K. PorterCrescent H.K. Porter Rebar Cutter and Bender - 0590RBJN
9.3 Simple to use8.9 worth the money8.2 Flexibility9.3Excellent
View offer on:
Show more
5
CENTALLCENTALL 5/8 Inch Electric Rebar Bender 1100 W Hydraulic Rebar Bending Machine #6-16 mm Rebar within 2-2.5 s Easy Bending Rebar Steel Bar HRB-16 (Blue)
Main highlights- 【Super performance】Electric Rebar Bender adopts 1100 W pure copper motor with strong power. Low noise and low failure rate when running. It can bend 5/8 inch (#6-16 mm) in just 2-2.5s, which raises your working efficiency greatly.
- 【Solid Body】 Rebar Bending Machine adopts sturdy steel body and high-strength bending block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender.
- 【Exclusive eccentric wheel design】Our bending machine head is designed with an eccentric wheel, which is our exclusive design for bending rebars of different thicknesses. Turning 180°of the eccentric wheel can bend thinner steel bars. With the eccentric wheel, it expands the bending range.
- 【Ergonomic Design】 Back grip handle and front handle designed for comfortable grip and easy operation. Griping the front handle can easily lift the bending machine for high-altitude operations. Safe, stable and effortless.
- 【Easy to Operate】One button operation. Press the switch and the bending block starts to push forward. When reach the angle you want, release the switch. After the rebar is bent, pull the relief valve and piston returns to its original position. Operation process is easy and convenient.
9.2Excellent
View offer on:
Show more
6
JetJET 5/8-Inch Rebar Cutter and Bender (Model RCB-25)
Main highlights- Variable Mounting Options: Mountable on a board or floor allows for one-handed operation
- Reduced Operator Fatigue: Easier cutting with the needle bearing design
- JET Red Assurance Warranty: Backed by JET's industry-leading one-year warranty
- High-Strength Steel Jaws: Permits cutting material up to a 48 Rockwell hardness for industrial applications
- Cutting Capacity: Cuts and bends up to 5/8-inch grade 60 rebar for a variety of applications
9.0Excellent
View offer on:
Show more
7
VEVORVEVOR Electric Rebar Cutter, 1700W Portable Electric Hydraulic Rebar Cutter, Cutting up to 1 Inch #8 4-25mm Rebar within 5 Seconds,110V,with Easy to Carry Stainless Box
Main highlights- Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc.
- Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption.
- One Button Operation: Just simply press the button and begin cutting in seconds to finish your accurate cutting. The ergonomically designed handle of our hydraulic rebar cutter facilitates maneuverability and ease of use. In addition, we provide you with high-quality protective boxes for better storage. It is mainly used in construction sites, factory workshops, railway construction, bridge construction, building house, roads, etc.
- High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability.
- Adjustable Bolt Design: An adjustable bolt on the portable rebar cutter achieves manual-like precision and ensures cutting stability when cutting rebar of various sizes. You only need to put the steel bar in the cut and adjust the bolt to fix it. Once set, all lengths will be uniform, so cutting is accurately repeated.
8.7Very Good
View offer on:
Show more
8
VEVORVEVOR Electric Hydraulic Rebar Bender, 1500W Portable Rebar Bending Machine, Bending up to 3/4 Inch #6 (6-20mm) within 4 Seconds, High Power Steel Rebar Bender w/Tool Case Oil Can,Black Blue RN-22
Main highlights- Wide Bending Range: Suitable for bending rebar with diameters from 6 to 20mm. Handles different bending needs with ease, suitable for medium carbon, low carbon, round, and threaded rebar.
- Precise and Fast Bending: The hydraulic electric rebar bender can precisely bend solid rebar within 4-5 seconds, with adjustable bending angles from 0° to 90°. Powered by a 1500W pure copper motor for robust performance.
- Metal Toolbox Included: Comes with a collision-resistant storage toolbox that accommodates the machine and various tools, making it easy to transport and use in different locations.
- Lightweight Construction: Made from lightweight PVC, designed for comfort during extended use. The compact and manageable weight minimizes fatigue even during prolonged operation.
- High-Strength Bending: Upgraded high-strength hooks ensure long-term bending performance. Equipped with a reset button; simply pull the hydraulic valve to safely reset after bending.
8.5Good
View offer on:
Show more
9
AnbullAnbull 1700W Electric Hydraulic Rebar Cutter,1700W Portable Electric Rebar Cutter,Cutting up to 1 Inch #8 4-25mm Rebar within 5 Seconds,110V,with Easy to Carry Stainless Box(1700W RC-25)
Main highlights- 【Wide Cutting Range and Fast Cutting Speed】Cutting capacity ranges from 3/20"(4mm) to 1"(25mm) # 8 rebar. Cutting speed 5-5.5s which can satisfies your various cutting demand. Replaceable sharp alloy steel blades with 4 sides reversible cutter jaws realizes manual-like precision.
- 【Updated Cr12MoV Replaceable Blade】With sophisticated blade processing technology and strict quality control, we utilize upgraded Cr12MoV blades that would not deform easily and serve you longer. The high density and high impact resistant PVC material shell allows for a longer service life and excellent heat dissipation.
- 【Pure Copper Coil Motor】1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption.
- 【One Button Operation】Simply press the button and begin cutting in seconds to finish your accurate cutting and raise your working efficiency greatly. Ergonomic grip design of our rebar cutter facilitates maneuverability and ease of use and safety.
- We offer one extra set of universal blades and a pair of well-tailored, soft gloves in the portable stainless container for your convenience. Please do Not cut the cable with the rebar cutter, which will jam the machine. Finally, please be careful not to use a steel bar cutting machine to cut the cable, otherwise the machine may get stuck.
8.2Good
View offer on:
Show more
10
CENTALLCENTALL Electric Rebar Bender 1150 W Hydraulic Rebar Bending Machine 7/8 Inch #7 10-22mm Rebar within 2.5-3 s Easy Bending Rebar Steel Bar HRB-22 (Grey + Orange)
Main highlights- 【Super performance】Electric Rebar Bender adopts 1150 W pure copper motor with strong power. Low noise and low failure rate when running. It can bend 7/8 inch (#110-22mm) in just 3-4s, which raises your working efficiency greatly.
- 【Solid Body】 Rebar Bending Machine adopts sturdy steel body and high-strength bending block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender.
- 【Exclusive eccentric wheel design】Our bending machine head is designed with an eccentric wheel, which is our exclusive design for bending rebars of different thicknesses. Turning 180°of the eccentric wheel can bend thinner steel bars. With the eccentric wheel, it expands the bending range.
- 【Ergonomic Design】 Back grip handle and front handle designed for comfortable grip and easy operation. Griping the front handle can easily lift the bending machine for high-altitude operations. Safe, stable and effortless.
- 【Easy to Operate】One button operation. Press the switch and the bending block starts to push forward. When reach the angle you want, release the switch. After the rebar is bent, pull the relief valve and piston returns to its original position. Operation process is easy and convenient.
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for rebar cutters benders
