10 Best Gas Flow Valve Solenoid In The Us
Best Choice1
AC InfinityAC Infinity CO2 Regulator, Carbon Dioxide Monitor with Solenoid Valve and Gas Flow Meter, CO2 Gauge Gas System for Grow Tents, Grow Rooms, and Greenhouses
9.3 materials Quality8.0 Tech Support8.0 Simple to useWhy we love it
Accurately measures CO2 levels and tank pressure.
Durable brass construction ensures no gas leakage.
Easy to install on various tanks and tubing.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Ace CrewAceCrew Industrial Brass Electric Solenoid Valve 1/2 inch NPT 110V, 120V AC Normally Open- flow control valve for gas, air & fluid
Main highlights- Weight of solenoid valve : 2 lbs Solenoid Valves are backed with our 1 Year Warranty
- Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline.
- Size 1/2 inch NPT thread ,Voltage AC 110V, 120V
- Pipe Size : 1/2" NPT female (14 TPI) . Orifice Diameter : 19/32" (15 mm) Seal/Diaphragm : NBR (Buna-N, Perbunan, and Nitrile rubber)
- Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C).
- Normally Open operation for gas and liquid flow control. Valve will close when energized. Suitable for operation systems that requires constant flow of fluid, gas & water in irrigation , gas activated and automated equipment , HVAC systems Flow rate Cv = 4.5 ; Unidirectional (indication on brass body)
- Current : 0.2 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
- Brass inlet & outlet NPT Thread , easy to install with 2-way 2-position direct lift diaphragm
- AceCrew Industrial grade Electric Solenoid Valve Normally Open
9.7Exceptional
View offer on:
Show more
3
HFSHFS(R) Electric Solenoid Valve Copper Normally Closed for Water Air Gas (12V DC 3/4IN NPT)
Main highlights- [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2. Working environment: water, air, compressed air and some stable gases.
- [SIZE]: 113mm*67mm (4.45 '' * 2.64 ''), thread diameter: 25mm (0.984 ''), interface pipe diameter: 3/4 '' NPT thread, flow diameter: 20mm (0.787 '')
- [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.
- [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working.
- [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve
9.6Exceptional
View offer on:
Show more
4
Terisnds1" Electric Solenoid Valve 110v/115v/120v AC Brass Normally Closed Gas Air Diesel Water NPT High Flow
Main highlights- Voltage: 110V-120V AC Volts; Size: 1" NPT
- Material: Made of industrial-grade brass, the valve can be used for gasoline, diesel, kerosene, natural gas, air
- If you have any questions, please feel free to let us know and we will offer professional advice within 24 hours
- Flow Aperture: 25 mm; Item Weight: 9.2 ounces
- Applications: Gas, Air, Diesel, Water, Oils; from 12F to 170F
9.3Excellent
View offer on:
Show more
5
U.S. Solid1/2" NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON from U.S. SOLID
Main highlights- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
9.0Excellent
View offer on:
Show more
6
YESWELDERYESWELDER CO2 Regulator with Solenoid Valve, Flow Meter Regulate CO2 for Grow Tent, Hydroponics
Main highlights- Wide Application: For indoor hydroponics, grow rooms, grow tents and greenhouses, Enhancing the percentage of carbon dioxide in growing environments for optimum growth and increasing yields substantially.
- Package Includes: A CO2 regulator with solenoid valve, 5 meters plastic tube.
- Durable Material: Made of high quality brass.
- Connections: CGA320 inlet connection.
- Accurate: The Square flow tube reads from 0 - 15 SCFH, which is indicated by a ball which moves up and down in the flow tube. And has 1.58" diameter pressure gauge which reads from 0 - 4000 PSI, Easy to read.
8.9Very Good
View offer on:
Show more
7
TriumilynnTriumilynn 1" Electric Solenoid Valve 110v/115v/120v AC Brass Electric Air Water Gas Diesel Normally Closed NPT High Flow 1PC
Main highlights- Voltage - 110V-120V AC Volts
- Suitable Applications - Air, Diesel, Gas, Water, Oils. Withstand temperatures from 12F to 170F
- Pressure Rating - Air: 110 psi / Water: 75 psi / Light Oil: 60 psi
- Please check your engine's model and part number before buying and contact us promptly for any issues
- Operation Mode - Normally Closed; Operating Type - Diaphragm Valve
8.7Very Good
View offer on:
Show more
8
U.S. Solid3/8" Electric Solenoid Valve 12-VDC, VITON Gasket, Air, Gas, Fuel Normally Closed
Main highlights- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W.
8.6Very Good
View offer on:
Show more
9
AceCrewAceCrew Brass Electric Solenoid Valve Viton 3/4 inch NPT, 110VAC, 120VAC Normally Closed - flow control valve for fluid, gas, air
Main highlights- Weight of solenoid valve : 1 lb 9 oz Solenoid Valves are backed with our 1 Year Warranty
- Viton FKM seal is better resistant to heat , reducing risks of leaks during operation and ensuring a tight sealing when actuated . Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-250 °F (-10~120 °C)
- VAC actuated valve , Normally Closed operation for gas and liquid flow control. Valve will open for flow when energized. Flow rate Cv = 9.3 ; Unidirectional (indication on brass body)
- Solenoid actuated Valve with Viton seal is suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, gasoline
- Size 3/4 inch NPT thread ,Voltage 110VAC , 120VAC
- Seal: Viton FKM/FPM, fluorocarbon Diaphragm : Viton (fiber-reinforced) Current : 0.2 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
- Pipe Size : 3/4" NPT Female (14 TPI) . Orifice Diameter : 3/4" (20 mm).
- Brass inlet & outlet NPT thread , easy to install with 2-way 2-position direct lift diaphragm
- AceCrew Industrial grade Electric Solenoid Valve Normally Closed with Viton FKM/FPM seal
8.5Good
View offer on:
Show more
10
AceCrewAceCrew Brass Solenoid Valve 1/2 inch NPT 220V, 240V AC Normally Open - flow control valve for gas, air & fluid
Main highlights- Weight of solenoid valve : 2 lb
- Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline.
- Size 1/2 inch NPT , Voltage AC 220V - 240V
- Pipe Size : 1/2" NPT Female (14 TPI) . Orifice Diameter : 19/32" (15 mm) Seal/Diaphragm : NBR (Buna-N, Perbunan, and Nitrile rubber)
- Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C).
- Normally Open operation for gas and liquid flow control. Valve will close when energized. Suitable for operation systems that requires constant flow of fluid, gas & water in irrigation , gas activated and automated equipment , HVAC systems Flow rate Cv = 4.5 ; Unidirectional (indication on brass body)
- Current : 0.1 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
- Brass inlet & outlet NPT Thread , easy to install with 2-way 2-position direct lift diaphragm
- AceCrew Industrial grade Electric Solenoid Valve Normally Open
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for gas flow valve solenoid
