10 Best Solenoid Valves In The Us - Black Friday 2024
Best Choice1
DaytonDayton, 1A578, Solenoid Valve Less Coil, 3/4 In, NC, Brass
Main highlights- Made in Mexico
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
AOMAGNormally Closed Water Fountain Solenoid Valves, 3/4" NPT AC 110V Stainless Steel VITON Electric Underwater Solenoid Valve for Water, Air, Oil, Fuel
Main highlights- 【VITON Gasket】-The sealing piece of the solenoid valve 110v 3/4” is made of VITON gasket. VITON gasket is not only suitable for non-corrosive media (Water and Air), but also for weakly corrosive media (Gasoline, Kerosene and other organic solvents, the viscosity of which is not higher than ordinary oil). If you intend on using a electric solenoid valve for gasoline, use only VITON gasket. (Note: If there are impurities, please install a filter at the inlet.)
- 【Stainless Steel Valve & High Precision Coil】- Water solenoid valve is constructed with industrial grade stainless steel, which is very durable, corrosion-resistant and leak-proof. The valve body is equipped with high-quality copper wire, which is a kind of precision coil that enables the solenoid valve to control and work more accurately and stably.
- 【Quality Guaranteed】- The underwater valves can be guaranteed for 3 years. This product is an underwater solenoid valve, which is suitable for underwater operation or wet environment projects. Water fountain solenoid valve can work continuously in water or wet environment, which is the best choice for fountain project.
- 【IP68 Waterproof Grade】- The coil of the sprinkler solenoid valve is a special waterproof cable for fountain, which adopts special technology, triple plastic sealing and IP68 waterproof grade. The electric solenoid valve for water has higher power and lower temperature rise rate.
- 【High Performance Solenoid Valve】- Voltage: AC 110V, Pipe Size: 3/4”NPT. Thread Inner Diameter: 25mm. Working Medium: Air, Water, Oil, Fuel. Temperature Range: 23-302°F, Pressure Range : 0-142 PSI. Solenoid valve 110v normally closed is a highly responsive valve, which means that it will instantly open or close the flow when it is powered on or off.
9.6Exceptional
View offer on:
Show more
3
U.S. Solid1/2" NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON from U.S. SOLID
Main highlights- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
9.3Excellent
View offer on:
Show more
4
U.S. Solid3/4" Brass Electric Solenoid Valve 110V AC Normally Closed Non-potable Water, air, Diesel by U.S. Solid
Main highlights- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
9.2Excellent
View offer on:
Show more
5
Plum Garden11% OffPlum Garden 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve, Stainless Steel
Main highlights- .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
- .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
- .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
- .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum).
- .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
8.9Very Good
View offer on:
Show more
6
U.S. Solid1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.
Main highlights- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
8.8Very Good
View offer on:
Show more
7
XimimarkXimimark 2Pcs 1/2" Thread Plastic Electric Solenoid Valve Water Inlet Flow Switch Magnetic Water Air Normally Closed Tools DC 12V N/C 0.02 to 0.8mpa
Main highlights- This valve is a normally closed solenoid valve, that is, it is energized to turn on (water), and the power is off (water cut).
- This is a micro pressure valve (pressure), suitable for 0.02-0.8MPA water pressure, please choose according to your actual needs.
- The valve body is made of all-plastic material, with 4 points of external thread on both ends of the valve body. The valve body is simple, the power terminal is insert type, and the 6.3 spring is used.
- The insulation grade is high and the heat dissipation effect is good. Under normal conditions, the product can be used for a long time.
- The coil is packaged by the international top-grade coil packaging material, and has the advantages of waterproof, moisture-proof, wear-resistant, corrosion-resistant, high-low temperature resistance.
8.7Very Good
View offer on:
Show more
8
TAILONZ PNEUMATICTAILONZ PNEUMATIC 1/4"NPT Solenoid Valve DC12V Single Coil Pilot-Operated Electric 2 Position 5 Way Connection Type 4V210-08 Outlet wire
Main highlights- 【Working Principle】When the coil is powered off, the valve stays open - when powered on, it closes.
- 【Voltage】DC12V【Working pressure】25~116℉【Working Temperature】32-140℉
- 【Size】Outlet port: 1/4 inch (about 0.6 cm) NPT; Inlet port: 1/4 inch (about 0.6 cm) NPT; Exhaust port: 1/8 inch (about 0.6 cm) NPT; We provide pneumatic fittings for direct connection to 1/4 or 6mm air hose.
- 【Product Name】2-Position 5-Way Solenoid Valve(Outlet wire)
- 【Fast response】High quality solenoid valve guide head, sensitive response, response speed 4 times per second, stable performance.
8.5Good
View offer on:
Show more
9
MACMAC 35A-AAA-DDBA-1BA BOOST CONTROL 35A 12V-DC 1/8 IN NPT SOLENOID VALVE B238300
Main highlights- Port Size: 1/8 IN
- MAC 35A-AAA-DDBA-1BA BOOST CONTROL
- Coil Voltage: 12 V-DC
8.4Good
View offer on:
Show more
10
U.S. Solid1/2" Stainless Steel Electric Solenoid Valve 12V DC Normally Closed
Main highlights- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for solenoid valves
