A4988 Vs Drv8825s of 2025
Best Choice1
EaglesEagles 10PCS DRV8825 Stepper Motor Driver Module, DRV8825 Module A4988 for 3D Printer RepRap 4 RAMPS1.4 StepStick with Heat Sink
Main highlights- With over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout function. More stable than A4988 module, these special features contribute to the safety and reliability of the system
- Supply voltage: 8.2V~45V; The Maximum current: 2.5A. Size: 1.5mmX2mm (same as 4988). The DRV8825 module is a high-performance stepper motor driver designed for controlling bipolar stepper motors. It provides precise step control and has a high current driving capability
- It can be used in 3D printers, robots, CNC machines, engraving machine and other applications that require precise stepper motor control.eatures contribute to the safety and reliability of the system. Compatible with 3d printers Prusa Mendel, ultimaker, printbot, makerbot etc. Compatibility with popular development platforms like Arduino
- DRV8825 Stepper Motor Driver Module is a 3D printer accessory DRV8825 stepper motor driver, Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- 4 layer PCB board, better heat dissipation. Small chip, 4 layer PCB board, lower heat, better heat dissipation 2 oz copper PCB for improved heat dissipation. Simple step and direction control interface
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
CenryKayCenryKay DRV8825 Stepper Motor Driver Module for 3D Printer Rrerap Ramps 1.4 A4988 (6PCS)
Main highlights- Product name: dv8825 stepper motor driver
- Product material: PCB; size: 1.5cm×2cm
- Drive current: 2.5A; maximum current: 2.5A; supports up to 32 subdivisions
- Can interface directly with 3.3 V and 5 V systems
- 4 layer PCB board, better heat dissipation performance
9.6Exceptional
View offer on:
Show more
3
JeanokoJeanoko DRV8825/A4988 Stable 42 Stepper Motor Driver Expansion Board 3D Printer Control Module for 3D Printer (4)
9.5Excellent
View offer on:
Show more
4
Teyleten RobotTeyleten Robot 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs)
Main highlights- Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection
- Six Different Steps Resolution: The Whole Step, Half Step, 1/4-Step1 / 8-Step1 / 16-Step, 1/32-Step
- Simple Steps And Direction Control Interface
- CAN Interface Directly With 3.3V And 5V Systems
- 4 Layer 2 Ounces Of Copper PCB, In Order To Improve Heat Dissipation
9.3Excellent
View offer on:
Show more
5
DiGiYesDiGiYes A4988 DRV8825 Stepper Motor Driver Control Extension Shield Board for 3D Printer, Step Motor Extension Module
Main highlights- The steering and speed of the four wire stepper motor is controlled by toggling the dip switches on the stepper motor driver expansion board. Different combinations of dip switches have different effects on the steering and speed of the four wire stepper motor.
- The A4988 / DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
- Jm connects the motor. Jv connects 5V and 12V-24V power supplies.
- Jc E S D G corresponds to the Enable Step Direction Gnd drive signal output on the connection.
- Connect the DRV8825 module: The stepper motor dip switch 1, 2, 3 are turned to the ON, at this time in the 32 subdivision state, the stepper motor speed is slow, clockwise half turn anticlockwise 1 turn, repeat the cycle.
9.1Excellent
View offer on:
Show more
6
JeanokoJeanoko DRV8825/A4988 Stable 42 Stepper Motor Driver Expansion Board 3D Printer Control Module for 3D Printer (2)
9.0Excellent
View offer on:
Show more
7
JeanokoJeanoko DRV8825/A4988 Stable 42 Stepper Motor Driver Expansion Board 3D Printer Control Module for 3D Printer (5)
8.9Very Good
View offer on:
Show more
8
SG StoreSG Store 2pcs 3D Printer Stepper Motor Drive Board 42 Stepper Motor Expansion Board 3D Printer Control Shield Module Compatible with A4988 DRV8825
Main highlights- Terminal Power: The stable 42 stepper motor driver expansion board is a terminal power connector and you can easily connect the drive power supply, which provides convenience for you largely
- Specification: Logic Voltage: 5V / Input voltage: 12-30V; Hole spacing: 1400 x 1400mil (35.56 x 35.56mm); Compatible with a wide range of power sources.
- Package includes: 2x 42 stepper motor drive expansion board
- Applicability: Engineered with a user-friendly design, this module is compatible with A4988 and DRV8825 modules, interface ensuring easy installation and seamless integration into your project.
8.8Very Good
View offer on:
Show more
9
AllGIFTAllGIFT 6pcs A4988 / DRV8825 Stepper Motor Driver for 3D Printer
Main highlights- Special Functions:It has functions such as overcurrent protection, overheat protection and low power consumption. These special functions contribute to the safety and reliability of the system
- Six different step resolutions: full-step, half-step, 1/4-step 1/8-step 1/16-step, 1/32-step
- Package Includes:6pcs DRV8825 Stepper Motor Driver Module
- Customer Service:If you encounter any product problems, please feel free to contact us, we will provide you with quality after-sales service
- Applicable items: occasions that need to drive stepper motors. Can build 3d printer, CNC, engraving machine and other modules
8.7Very Good
View offer on:
Show more
10
FYSETCUpgrade Stepper Motor Driver Heatsink, FYSETC 10pcs 3D Printer Parts Anodized Aluminum Heatsink 3D Printer Cooler for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver Module, Blue
Main highlights- Ｍaterial: Adopting special design and Anodized aluminium material to achieve faster heat dissipation. The fins increase the area of board and improve the cooling effect
- Size(LWH): Approx.10 x 10 x13 mm/ 0.39" x 0.39" x 0.51"
- Quality: High quality and durable with long service life. These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance
- Package includes: 10 x Stepper Driver Heatsink with Back Glue, easy to install
- 3D Printer Mainboard Application：Excellent 3D Printer heat sinks with back adhesive: Work well for 3D Printer Reprap MKS Gel stepper motor driver and other motherboard
8.5Good
View offer on:
Show more
Similar products on Amazon
