10 Best 10pcs Multiplexer In The Us - Black Friday 2024
Best Choice1
Coliao10pcs 74HC4051 8-Channel-Mux Analog Multiplexer Selector Module Distributor Resolver CJMCU-4051 Module for Raspberry Pi
Main highlights- When E is low, one of the 8 switches will be selected by S0-S2 (low-impedance state). When E is high, all switches enter a high-impedance state, directly ignoring S0-S2.
- VCC and GND are the supply pins for the digital control terminals (S0-S2, E). The VCC to GND range of the 74HC4051 is 2.0V-10.0V.
- The 74HC4051 module is an 8-channel analog multiplexer/demultiplexer with 3 digital selects (S0-S2), one active low enable (E), and 8 independent inputs/outputs (Y0-Y7) ) and a common input / output (Z).
- Package Contains: 10pcs 74HC4051 8 channel analog multiplexer selector module multiplexers distributor resolver CJMCU-4051 for raspberry pi.
- As a digital multiplexer/demultiplexer, the VEE will be connected to GND (typically grounded).
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Aobao10pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board
Main highlights- Working Voltage: 1.65-5.5V
- Selectable I2C address: 0x70-0x77
- Max Clock Frequency: 400KHz
- Interface: I2C IIC
- Chip: PCA9548A/TCA9548A
9.5Excellent
View offer on:
Show more
3
ACEIRMCACEIRMC 10pcs CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board Module for Arduino 2V-6V Microcontroller 16 Device RX Lines
Main highlights- To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!
- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)
- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
- It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.
- Analog output: DIG;Channel control: S0-S3
9.4Excellent
View offer on:
Show more
4
DIANNDIANN 10pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board with Cable
Main highlights- Working Voltage: 1.65-5.5V；Selectable I2C Address: 0x70-0x77
- TCA9548A Adapter is Connected to An I2C Device with Multiple Identical Addresses on the Same I2C Port on the main control board for Normal Communication and Use
- Package Contents:10pcs TCA9548A I2C IIC Multiplexer Breakout Board and 10pin Cable
- Instructions For Use: The /RESET, SDA, SCL, A0, A1, and A2 Pins On the Board are Connected to the Pull-Up 10K Resistor, No Need to Connect Externally
- Chip: TCA9548A；Interface: I2C IIC
9.1Excellent
View offer on:
Show more
5
DORHEADORHEA 10Pcs TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board
Main highlights- When the 8 channel expansion board device is also in normal use, the default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77 according to your needs. In theory, 8 expanders can be cascaded in the address of 0x70~0x77, and each expander can connect 8 devices with the same address. This realizes the same I2C port and connects 64 devices with the same address and uses them normally.
- When a timeout or other improper operation occurs, the system master can reset the TCA9548A by asserting the /RESET input low. Similarly, a power-on reset deselects all channels and initializes the I2C/SMBus state machine. Reset and initialization can also be achieved by asserting /RESET and there is no need to power down the part. The switch has a turn-on gate so that the VCC pin can be used to limit the maximum high voltage through the TCA9548A.
- The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port.
- Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected.
- CJMCU- 9548 TCA9548 limiting the maximum high voltage allows different bus voltages to be used on each channel pair so that 1.8V, 2.5V or 3.3V components can communicate with 5V components without any additional protection, for each channel, external pull-up resistors The device pulls up the bus voltage to the desired voltage level. All I/O pins are 5V withstand voltage.
8.8Very Good
View offer on:
Show more
6
DAOKIDAOKI 10pcs CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board Module for Arduino 2V-6V Microcontroller 16 Device RX Lines
Main highlights- To achieve fast turn-on and off the circuit, an unlimited number of switching;
- The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature, operating current of up to 15A, power up to 400W, to meet the most use of the equipment;
- Conducting and cutting process does not produce noise, no spark, no electromagnetic interference;
- Compared with electromagnetic relay products, longer life;
- A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient.
8.6Very Good
View offer on:
Show more
7
DORHEA12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY
Main highlights- To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins.
- The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).
- Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to.
- It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
- CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels; Analog output: DIG; Channel control: S0-S3
8.5Good
View offer on:
Show more
8
IndustrialFieldIndustrialField 10pcs SN74HC138N 74HC138 74HC138N DIP-16 Encoders Decoders Multiplexers & Demultiplexers 3-to-8 Line Decoder
8.4Good
View offer on:
Show more
9
HiLetgo10pcs/lot HEF4053 HEF4053BT SOP16 multiplexer New Original
8.2Good
View offer on:
Show more
10
UMLIFE6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino
Main highlights- Wide operating temperature range: -55C to 125C
- Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
- IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
- Analog output: DIG;Channel control: S0-S3
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 10pcs multiplexer
