10 Best Workholding Devices In The Us - Black Friday 2024

Advertising Disclosure

Last Updated - November 22, 2024

Best Choice

1

Clicked 45 times in the last month

PONY
Pony Portable Folding Work Table, 2-in-1 as Sawhorse & Workbench, 31” W×25” D×25”-32”H, Large Load Capacity with 4pcs Clamps, 4pcs Bench Dogs

20% Off

9.9 Easy to build

9.9 Durability

9.9 Stability

Why we love it

Portable and easy to switch between a work table and sawhorse

Can hold up to 500 lbs as a table and 1,000 lbs as a sawhorse

Height is adjustable to 3 different levels
Main highlights

Set Includes: 1-pack worktable; 2-pack 12” medium-duty E-Z HOLD bar clamps; 2-pack 6” light-duty E-Z HOLD bar clamps; 2-pack large bench dogs; 2-pack small bench dogs; 2-pack safety straps. Every accessory is designed for added flexibility to use
Height Adjustable: Folding workbench can be adjusted at six different heights - from 30" to 35", catering to diverse work scenarios such as garages, lawns, and gardens. This height-adjusting feature allows you to handle projects at different levels
Easy To Carry: The workmate's collapsible design folds flat for easy transportation and storage in a car, garage, or storage room. The hassle-free breakdown and folding mechanism make moving between jobs or locations effortless
500 LBS Load Capacity: 2-in-1 clamping worktable and sawhorse feature quick clamps and holding pegs, supporting up to 500 lbs as a table and up to 1000 lbs as a sawhorse. Its aluminum leg frame provides superior strength compared to other workbenches
2-in-1 Worktable: Portable work table is easy to switch between the sawhorse and the workbench, which can adapt to a variety of work scenarios, making your work more convenient
Show more
9.9

Exceptional

View offer on:

Show more
Curious about how we select the top products for you? Explore How It Works

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service levels, popularity trends, and more. The rankings reflect our opinion and should be a good starting point for shopping. By purchasing the products we rank, you’ll get the lowest price we found while we may receive a commission at no cost to you, which will help us continue to provide you with value.
Value for Money

2

Wilton
Wilton Cross-Slide Drill Press Vise, 4" Jaw Width & Max Opening, 1-3/8" Jaw Depth (Model CS4)

8.4 Flexibility

8.0 Durability

8.0 worth the money

Why we love it

Accurate: Precisely position workpiece.

Precise: Dial in .1mm increments.

Stable: Five bolt lugs for mounting.
Main highlights

Key Features
Precise positioning with .1mm increments, durable fine-grain cast iron construction, and hardened V-groove jaws for versatile holding.

Ideal Use Cases
Perfect for machining tasks requiring exact positioning, including holding round objects both vertically and horizontally on a machine table.

Customer Praise
Most reviews highlight the product`s precision and durability as its standout feature, appreciating its quality construction and reliability.
Show more
9.6

Exceptional

View offer on:

Show more
3

WETOLS
WETOLS Corner Clamp for Woodworking, 90 Degree Right Angle Clamp, Wood Clamps, 4Pcs Adjustable Spring Loaded Woodworking Clamp, Gifts for Dad, Birthday Gifts for Men, Photo Framing, Orange

9.1 Maneuverability

9.1 Flexibility

8.7 Simple to use

Why we love it

The WETOLS corner clamp is perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box, and picture reinforcement, furniture repair connection, wooden DIY projects, etc.

It is made of premium quality polyamide material, which is durable for long service life.

The huge spring tension can keep boards sturdy in place when screwing or gluing them together.
Main highlights

Key Features
Adjustable, durable polyamide material, and one-handed operation. Ideal for small woodworking projects requiring precision and ease.

Ideal Use Cases
Perfect for DIY woodworking, making cabinets, picture framing, and small welding projects. Fits boards 3/16 - 3/4 inch thick.

Customer Praise
Most reviews highlight its strong spring tension and durability, ensuring boards stay in place during projects.
Show more
9.5

Excellent

View offer on:

Show more
4

Diylog
DIYLOG Corner Clamp for Woodworking, 90 Degree Clamp, Corner Clamp, Right Angle Clamp Woodworking Tools 4 Pack 5.5"*5.5" Aluminum Positioning, Wood Working Tools and Equipment, Clamping Squares

16% Off

9.9 Durability

9.7 Simple to use

9.7 Precision
Main highlights

【The Sales Status and Actual Use of Woodworking Angle Clamps Show That】(140mm/5.5 inch) Woodworking tools and accessories are a very scientific size choice. Ideal for assembling frames: picture frames, drawers, cabinets, furniture cabinets, birdhouses, mailboxes, or maintaining any object you want to keep perfectly square at 90 degrees.
【Corner Clamp are Widely Used】The wood clamps for woodworking L has slightly chamfered edges that won't scratch your hands and woodwork to help level them during gluing, splicing, welding. Check and correct for 90 degree angles on wood, countertops, saw blades, etc. right angle clamp are a great tool to make woodworking projects easier.
【A Unique Gift for DIY Hobbyists or Woodworkers】This woodworking square clamping is a unique gift for fathers, husbands, Diy enthusiasts, boy/girlfriends, woodworkers. We offer a one year warranty and have a 24 hour customer service hotline. If you have any quality problems, please contact the after-sales service at first.
【90 Degree Wood Working Tools and Equipment Precision Angle Clamp】Made of high quality aluminum alloy to ensure 90 degree precision, Square wood clamps for Woodworking right angle positioning tools. The surface is red anodized, anti-rust and corrosion-resistant, CNC processing makes it more durable.
【90 Degree Clamp for Easy Operation】The wood is adjusted to the correct position using the aluminium corner clamps and then the work is completed by tightening the wood and clamp using the L-shaped metal screw, plastic nut. For boards with a maximum clamping thickness of 3.5" / 90 mm with both metric and imperial units of measurement.
Show more
9.2

Excellent

View offer on:

Show more
5

WYQYQ
WYQYQ 4pcs Corner Clamp - Right Angle Clamp 90 Degree Wood Clamps For Woodworking, With Adjustable Swing Jaw Aluminum Alloy Frame Clamps, For Welding, DIY Woodworking.

9.5 worth the money

9.3 Durability

9.1 Simple to use

Why we love it

Sturdy and durable

Precise and easy to use

Multi purpose
Main highlights

What You Get: our friendly customer service, and 4pcs high quality angle clamp to help you complete your work better and faster.
WYQYQ 90 degree angle clamp maximum clamping range is approx. 2.75in/70mm; jaw width: 3.74in/95mm; jaw depth: 1.38in/35mm
Quality Throughout: right angle corner clamp is high-quality aluminum alloy die-casting, sturdy and durable, non-slip rubber handle, and comfortable in hand.
Precise And Easy To Fixed: 90 clamp with adjustable jaws and rotating nuts, the single-handle claw can be rotated in both directions, and two wood blocks of different thicknesses can be connected at a right angle.the oblong hole can fix it on the workbench.
Multi-purpose：right angle clamps are used to fix wooden corners, welding, framing, carpentry, drilling, dowels, making cabinets, installing furniture, etc.
Show more
9.1

Excellent

View offer on:

Show more
6

TRISENSE
TRISENSE 6" Vise Jaws, Universal Soft Vice Jaws Pads Covers with Strong Magnetic, Multi-Purpose Protector for Any Metal Vice, 1 Pair, Golden
Main highlights

【Wide Application】Our vise jaw pads are great for holding wood, metal, and plastic, ideal for all kinds of shop, craft, jewelry, and gunsmithing projects.
【Performance】These 6" vise jaws, made of high-quality aluminum and rubber, can be used to firmly hold wood, metal, plastic, tubing, and threaded items to protect any product with a flat or round surface.
【Multi-purpose】The magnetic vice jaws are compatible with various mental vises, including bench vices, mill clamps, drill press vices, etc.
【Design】Aluminum soft jaws with a specially designed V-shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping, providing convenience in operation.
【Advantage】Eight embedded magnets (one pair) keep vice jaws in place securely without shifting during use. Different-color choices allow you to dedicate each vibrant jaw set for particular workshop tasks.
Show more
9.0

Excellent

View offer on:

Show more
7

VEVOR
VEVOR Bench Vise, 6-inch Jaw Width 5.9-inch Jaw Opening, 360-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Ductile Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting

25% Off

9.3 worth the money

9.3 Flexibility

9.1 Durability
Main highlights

Multifunctional Sturdy Jaw: The multi-jaw fits both flat material and pipe or tube workpiece. Pipe Clamping Diameter: 0.6"-2.9" / 1.5-7.4 cm. It is perfect for small projects and is highly adept at securing tools for sharpening, grinding, cutting, tapping, etc.
Large Anvil Area: The strong design comes in handier when you take the 2.9" x 3" anvil into consideration. Jaw Width: 6" / 15.2 cm. Jaw Opening: 5.9" / 15 cm. Throat Depth: 3.5"/ 8.8 cm. Creates up to 20 k.N / 4496 lbs of clamping force.
Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts, screws, a manual, and magnetic jaw pads for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!
Built to Last: The swivel vise is forged from sturdy 60,000 PSI ductile iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!
Adapt to Any Situation: The base can rotate an entire 360°. You can choose to tighten it in any direction you need to work at your fingertips. It allows an ever greater degree of accuracy as there is no need to keep inserting and removing the piece you are working on.
Show more
8.8

Very Good

View offer on:

Show more
8

WORKPRO
WORKPRO Bar Clamps for Woodworking, 6-Pack One-Handed Clamp/Spreader, 6-Inch (4) and 12-Inch (2) Wood Clamps Set, Light-Duty Quick-Change F Clamp with 150 lbs Load Limit Blue

9.9 Simple to use

9.9 Flexibility

9.7 worth the money

Why we love it

Solid construction withstands heavy use on construction sites.

Quick-change button easily converts clamp to spreader.

Powerful clamping force ideal for woodworking projects.
Main highlights

Solid Construction and Versatility
Reinforced nylon body, high-quality steel bars, and quick-change button for converting clamp to spreader; lightweight yet sturdy with up to 150 lbs clamping force.

Ideal for DIY and Woodworking Projects
Perfect for small to medium woodworking projects, household repairs, and DIY jobs; includes 6 & 12 clamps set for versatile use.

Highly Praised One-Handed Design
Customers appreciate the one-handed operation, making it easy to adjust and use with good clamping force; great value for the price.
Show more
8.7

Very Good

View offer on:

Show more
9

Fetcoi
Woodworking Bench Vise - Hard Wood Vise for Workbench with 4 Bench Dogs and 2 Clips, Wood Bench Vises Kit Workbench Top Whittling Vise Woodworking Tools Work Benches for Garage Studios

8.7 worth the money

8.2 lasts a long time

8.2 Durability

Why we love it

Durable beech wood with beautiful grain.

Versatile for various woodworking tasks.

Excellent clamping power with bench dogs.
Main highlights

High Quality Beech Wood Construction
This woodworking vise is made of high-quality beech wood, ensuring strength, impact resistance, and durability with a visually pleasing grain.

Versatile for Various Woodworking Tasks
Ideal for chiseling, planing, and sawing, this vise meets most woodworking needs and can be easily mounted on any platform.

Sturdy and Functional Design
Customers frequently praise the vise's strong and sturdy construction, noting its good quality and value for the price.
Show more
8.6

Very Good

View offer on:

Show more
10

Peachtree Woodworking Supply
Peachtree Woodworking Supply ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

9.3 Precision

9.3 Simple to use

9.1 worth the money
Main highlights

The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
Show more
8.5

Good

View offer on:

Show more

10 Best Workholding Devices In The Us - Black Friday 2024

1

Pony Portable Folding Work Table, 2-in-1 as Sawhorse & Workbench, 31” W×25” D×25”-32”H, Large Load Capacity with 4pcs Clamps, 4pcs Bench Dogs

Why we love it

2

Wilton Cross-Slide Drill Press Vise, 4" Jaw Width & Max Opening, 1-3/8" Jaw Depth (Model CS4)

Why we love it

3

WETOLS Corner Clamp for Woodworking, 90 Degree Right Angle Clamp, Wood Clamps, 4Pcs Adjustable Spring Loaded Woodworking Clamp, Gifts for Dad, Birthday Gifts for Men, Photo Framing, Orange

Why we love it

4

DIYLOG Corner Clamp for Woodworking, 90 Degree Clamp, Corner Clamp, Right Angle Clamp Woodworking Tools 4 Pack 5.5"*5.5" Aluminum Positioning, Wood Working Tools and Equipment, Clamping Squares

5

WYQYQ 4pcs Corner Clamp - Right Angle Clamp 90 Degree Wood Clamps For Woodworking, With Adjustable Swing Jaw Aluminum Alloy Frame Clamps, For Welding, DIY Woodworking.

Why we love it

6

TRISENSE 6" Vise Jaws, Universal Soft Vice Jaws Pads Covers with Strong Magnetic, Multi-Purpose Protector for Any Metal Vice, 1 Pair, Golden

7

VEVOR Bench Vise, 6-inch Jaw Width 5.9-inch Jaw Opening, 360-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Ductile Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting

8

WORKPRO Bar Clamps for Woodworking, 6-Pack One-Handed Clamp/Spreader, 6-Inch (4) and 12-Inch (2) Wood Clamps Set, Light-Duty Quick-Change F Clamp with 150 lbs Load Limit Blue

Why we love it

9

Woodworking Bench Vise - Hard Wood Vise for Workbench with 4 Bench Dogs and 2 Clips, Wood Bench Vises Kit Workbench Top Whittling Vise Woodworking Tools Work Benches for Garage Studios

Why we love it

10

Peachtree Woodworking Supply ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

Black Friday Sale

Related deals you might like for workholding devices

6 Pack Toggle Latch Clamp 4001, Adjustable Latch, Smoker Clamps Heavy Duty Latches, 330Lbs Holding Capacity Pull for Lid Jig, Tool Box Case (24PCS Screws)

$6.99

POWERTEC 4PK Hold Down Toggle Clamp, 300 lbs Holding Capacity, 201B Antislip Quick Release Horizontal Clamps for Woodworking Jigs and Fixtures, Welding, Drill Press, Crosscut Sled (20327)

$10.99

Milescraft 4009 Fence Clamps - 2 pack Universal Clamps with 3/8" Rod for Table Saws, Mitre Saws, Router Tables and Clamping Squares

$13.99

CRAFT911 Pin Vise Hand Drill Manual - Jewelry Drill w/Micro Drill Bits (0.8mm-2.5mm) - Rotary Craft Drill for Jewelry Making, Resin, Wood, Plastic, Miniature, Beads, Clay Etc

$14.97

ZYRELYNX Upgraded Silicone Soldering Stand, Helping Hands Soldering Station, Soldering Wire Holder with 6 Slots - Third Hand Soldering Iron Stand for 32AWG to 12AWG Wires(Only Stand), Dark Grey, 1 Pcs

$11.99

DAYDOOR Bench Dog Clamp, MFT Stainless Steel Table Stop for 3/4'' Dog Hole, Workbench Peg Brake Stops for Woodworking(19mm, 4 Pack)

$12.99

E-TING Hand Tool 201B Toggle Clamp 198Lbs Antislip Red Horizontal Clamp 201-B Quick Release Tool (4)

$11.39

C CASIMR 90 Degree Corner Clamp, 4 Pack Adjustable Single Handle Spring Loaded Right Angle Clamp,Swing Woodworking Clip Clamp Tool

$9.98

DDWT 2 Pack Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Adjustable Workbench Stop Stainless Steel Brass (19mm)

$27.61

SEDY Band Clamp, Frame Clamp Quick Release Strap Clamp For Woodworking, Belt Clamp Strap Clamp

$12.99

Sign up and get exclusive special deals