Wham Bam Flex Plates of 2025
Best Choice1
FordFLEX PLATE
Main highlights- Genuine Ford Part
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
BIGTREETECH DirectBIQU CryoGrip Pro Frostbite Panda Build Plate for Bambu-Lab P1S P1P X1C X1E A1 3D Printers, Cold Printing Build Plate, Double-Sided Textured Spring Steel Sheet, 257x257mm, 1 Piece
Main highlights- 【Unmatched Adhesion, Zero Heat】BIQU Frostbite cold print build plate is compatible with PLA at a low temperature range of only 30-50℃, and PETG at only 50-70℃. It highly surpasses traditional PEI steel spring sheets as per prints adsorption in cool printing with PLA and PETG. Its superior first-layer adhesion helps you to keep away from glue, edge warping and print falling off.
- 【Room Temp Cold Printing】BIQU CryoGrip Pro Frostbite Panda build plate boasts revolutionary 7-layers design and unique polymer material which help it to realize room temperature printing with firm adhesion. It also helps to vastly improve print success and save energy. Frostbite build plate ensures warp-free printing of PLA & PETG, allowing you to keep the auxiliary fan on and eliminates concerns about drafts affecting your prints, even in open models like the P1P and A1.
- 【Effortless Prints Removal】BIQU Bambu-Lab build plates enable easy prints removal. Slightly bend the surface of the build plate, then your prints will detach cleanly, no need of any scraping or prying tools. It is compatible with Bambu-Lab P1P, P1S, X1C and A1 printers. The plate comes with QR Code, so the build plate position option can still be enabled.
- 【Easy to Clean】 Use only water and soap to clean the build plate surface. DO NOT use solvents like alcohol since they may cause permanent surface damage. With our self-recovering coating, a simple wipe will restore its adhesion, ensuring confident performance every time.
- 【Cool and Clog Free】Uniquely designed to print PLA at ambient temperatures, the CryoGrip Pro Frostbite prevents your filament from softening and slipping in the extruder due to high chamber temperatures. With the breakthrough cold printing technology of CryoGrip Pro build plate, you can save 50W/h of power compared to traditional PEI build plate in printing that needs bed heating. Half energy can be saved!
9.6Exceptional
View offer on:
Show more
3
HIKUDIYHIKUDIY 2 PCS Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for ELEGOO Saturn 4 /Saturn 4 Ultra/Saturn 3/Saturn 3 Ultra/Saturn 2 8K/Saturn 8K 3D Printer, 224x129mm
Why we love it
Durable steel for long-lasting use.
Easy installation and removal.
Excellent print adhesion.
9.5Excellent
View offer on:
Show more
4
SovolSovol 2 Pack Resin 3D Printer Flex Building Plate, Spring Steel Flexible Plate and Magnetic Base Platform for Saturn 2 8K/ Saturn 3/ Saturn 3 Ultra/Saturn 4/Saturn 4 Ultra/Saturn 8K 224x129mm
Main highlights- Please adjust the z limit switch after installation. It should be a little higher. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
9.4Excellent
View offer on:
Show more
5
BIQUBIQU Resin Printer Flex Plate+Magnetic Sheet, 140X84MM Resin Flexible Steel Plate Flex Bed for Elegoo Mars 2 Pro/Nova3D Bene 4 3D Printer
Main highlights- Strong Adhesion: The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed;
- High Durability: The mars 2 pro build plate adopts spring steel imported from USA, which has good flatness and durability; The soft magnetic stickers have strong magnetic force.
- Easy to Use: The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface.
- Easy to Remove: Thanks to the ergonomic handle design,the steel plate is easier to be removed from the platfrom
- Applicable 3D Printer Model: The size of resin spring steel plate is 140X84mm. Suitable for any resin 3D printer with a printing platform size of 140X84mm, such as: Elegoo-Mars 2 Pro/Nova3D Bene 4 resin 3D Printer
9.3Excellent
View offer on:
Show more
6
AladrsALadrs Resin 3D Printer Flex Building Plate,Spring Steel Flexible Plate and Magnetic Base Platform for ELEGOO Saturn 3,Saturn 3 Ultra,Saturn 2 8K 3D Printer 224x129mm
Main highlights- Installation method: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat it, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print (A4) 3.8mm thick spacers to facilitate the normal zeroing of the Z axis.
- High durability:Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
- Easy to operate: Traditional DLP light-curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending. Easier removal of printed models from the resin build surface. Makes it easier to remove prints and avoid damage in the process, especially for small prints.
- Clever design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
- Applicable model: 224x129mm is made for ELEGOO Saturn 3, Saturn 3 Ultra,Saturn 2 8K,Saturn 8K, Saturn.This resin magnetic flexible steel plate flex bed is also can used for the plate 's size which is longth between 224-234 mm,the width between 129-139mm.
9.2Excellent
View offer on:
Show more
7
HICTOPHICTOP Bambu lab PEI Sheet Double Sided 257.5 x 257.5mm(10.14 * 10.14inch) Textured PEI Sheet PEI Build Plate for Bambu Lab X1/ X1C/ P1P /A1 3D Printers
Main highlights- 5 The size of HICTOP PEI bed is 257.5 x 257.5mm(10.14*10.14inch), it is applicable with Bambu Lab X1/ X1C/ P1P/A1 3D printers
- 4 Prints come off 257.5 x 257.5mm(10.14*10.14inch) pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
- 2 The HICTOP textured PEI is very easy to use, simply place the steel platform with PEI surface on the top of the heated bed.
- 1 The HICTOP double-sided pei is a flexible steel platform coated with textured PEI surface on both sides.
8.9Very Good
View offer on:
Show more
8
SifrothySifrothy Smooth Camouflage+Black Forged Carbon Fiber 3D Printer Build Plate for Bambu Lab X1 X1C X1E P1P P1S A1, Double Sided Smooth Flexible Sheet Spring Steel Plate for Bambu 3D Printers 257x257mm
Main highlights- 【Unique Psychedelic Design】One side of the bambu sheet is camouflage pattern. The other side is black forged carbon fiber pattern. Both sides can give more creativity to your 3D printing.
- 【Package Included】1 x Smooth build plate (Camouflage+Black Forged Carbon Fiber patterns). Double Sided can be used. (THE BUILD PLATE IS DOUBLE SIDED FILMS, IT'S EASILY SCRATCHED EVEN IF WE ENHANCE THE PACKAGE. PLEASE CONTACT US IF YOU RECEIVE THE SCRATCHED PLATE!)
- 【Good Adhesion】The excellent adhesion base on selecting "Smooth PEI Plate/High Temp Plate" on your slice and clean up the spring steel plate before each print. Beside, please use our recommend filaments, PETG: 70~90℃; TPU: 20~40℃; PLA: 60~65℃; ABS: 90~100℃.
- 【Easy to Clean and Maintain】The pattern of the prints may fade or disappear if wiped with hands or other oily objects, but don't worry, you only need to wipe the H1H surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean, the Light beam or phantom pattern can be reappeared!
- 【Compatible Printer】 The PEI build plate is for Bambu Lab X1/X1C/X1E, Bambu Lab P1P, Bambu Lab P1S Carbon ,Bambu Lab A1.( Note: if your pritner is X1/X1C/X1E, highly suggested turn off "Enable detection of build plate position")
8.8Very Good
View offer on:
Show more
9
Comgrow20% OffPEI Sheet 235x235mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Neptune 3 Pro/Neptune 4/Kobra/Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1 3D Printer
Main highlights- Universal - Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Voxelab Aquila/Voxelab Aquila C2/Voxelab Aquila X2
- Note - If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the “Your Orders” page. We will respond with 24 hours.
- Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
- Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate. High strength and reusable.
- DIY - The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
8.7Very Good
View offer on:
Show more
10
MoparFlex-Plate Or Flywheel Backing Plate
Main highlights- Product Type :Auto Part
- Package Weight :1.0 Lbs
- Package Quantity :1
- Country Of Origin :United States
8.6Very Good
View offer on:
Show more
Similar products on Amazon
