10 Best Waterproof Touch Sensor Switch In The Us - Black Friday 2024
Best Choice1
YogcowYogcow Hidden Touch Switch, AC 110V 250Watt Touch Sensor Switches with 6ft Plug Cable, for Lamp on/Off, Touch Control Through Panel, Penetrable Wood, Stone, Glass and More, No Hole Required (White)
Main highlights- This LED Touch Sensor Switches input 85-250V AC, ouput 85-250V AC, Connects directly to AC power and fixtures without the need for a DC adapter, Compatible various High voltage LED lights, such as 110V/120V hard light bar, soft light strip, incandescent lamp,energy-saving lamp and so on. 120 volt max current is 2A. (If your fixture is using DC power, please visit B0C5SMWP3F).
- The touch sensing signal can penetrates wood panel, stone panel, stone, paper, acrylic, plastic, glass and other non-metallic materials. Max thickness 3cm, The different thickness sensitive is different, the thinner the better, Please not near metal materials to avoid interference. (If you want to use it to penetrate the mirror, you have to scrape off the coating where the sensor switch is installed.)
- Smart touch control: Mount it on the back of the panel and control it through the panel, short touch light on/off, (note: This switch is not dimmable).
- Easy Concealed Installation: Just use the double-sided adhesive sticker included with the touch dimmer to attach the switch to the back of the panel, and then use the wiring clips to connect to the light, and then plug in the power. without soldering.
- As a touch lamp switch, Often used to control LED strip lights, LED light bar, table lamps, suitable for cabinets, wardrobes, desks, bookshelves, bedside, Showcase, vanity mirrors, wine coolers, caravans and more.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
SonewTouchless Infrared Sensor Exit Button Switch with LED Backlight Button Easy to Install Strong and Waterproof for Various Access Control System
Main highlights- [Touchless Button]-Touchless sensor exit switch, using infrared optical technology, when the finger senses the infrared light and reacts, the backlight will turn red, and then the door will open. The switch responds agilely and quickly.
- [LED Backlight]-The exit switch has a beautiful appearance and two LED color indications of red and blue. The double LED indicator light changes color. It is suitable for dark places and looks beautiful when installed at the gate.
- [Easy To Install]-Convenient installation method makes it easy for you to install. After a few minutes of simple installation, you can get a convenient and efficient entrance and exit switch.
- [ and Waterproof]-The button panel is made of stainless steel plate material and made of stainless steel wire drawing, robust material makes the switch longer lifewhich is waterproof, dustproof, and .
- [ And Effective]- and efficient DC12V exit sensor switch, which can help you automatically sense the exit switch,and the sensing distance is within 10 cm. It is widely used in access control systems to ensure your access safety.
9.5Excellent
View offer on:
Show more
3
GebildetGebildet Touch Switch Latching Switch Waterproof IP67 Touch Button DC 6V-36V/5A, Red LED & Green LED Suitable for 7/8" 22mm Mounting Hole
Main highlights- Touch switch has two color LED light, normally it is red color, if you touch button turn on device, LED light will change to green color
- Touch Switch, normally be used to control the lights. Don't exceed the rating amps and volts, you can run it on your other projects.
- The wires replace the terminal pins, make installing very easy.
- Red LED on the switch make you quickly find the switch at night or in the dark.
- Latching Switch Type: Touch it, the device is ON; Touch it again, the device turns OFF
9.4Excellent
View offer on:
Show more
4
LDCREWaterproof IP67 Bathroom Dimmable Swicth LED Dimmer 12V Touch Sensor 3A Touch Sensor Switch 12V Touch Dimmer for Mirror Light with DC Connetcor
Main highlights- [Working voltage] DC12-24V
- [Wide application] LED lamps and various household appliances.Isolated touch sensor switch, suitable for LED with protective cover such as glass, plastic, ceramic, etc.
- [Touch sensing technology] Lights can be turned on and off and brightness adjusted easily by touching the switch position of the installed object.
- [How To Use] 1;Tear off the sticker on the touch switch first, and then find the switch mark of your mirror.2;Stick the touch switch on the back of the switch mark of the mirror.3;Connect the power supply.4;Control the switch of your mirror.
- [Bathroom Mirror Dimmable Switch] The mirror light can also be turned on quickly in a damp bathroom, making it clearer when looking in the mirror.
9.1Excellent
View offer on:
Show more
5
HiLetgoHiLetgo 10pcs TTP223B Capacitive Touch Switch Module Touch Sensor Switch Digital Capacitive Touch Sensor Switch DC 2~5.5V
Main highlights- This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off.
- The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
- Positive and negative can be used as a touch surface,can replace the traditional touch button.
- In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons.
- Four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials.
9.0Excellent
View offer on:
Show more
6
QINIZX2pcs DC 3V-30V 5V 12V 2A Miniature Capacitive Touch Switch Sensor Module Mini Bistable Button touch Electronic Switch Control for LED Relay Latch/Inching Trigger Action
Main highlights- Touch sensitivity adjustment: Maximum sensing distance up to 8mm, If you want to reduce sensitivity, you can add 1-50PF capacitors according to actual usage. The smaller the capacitance, the higher the sensitivity; Suitable for LED light control, support for external relays, power switch, microcontroller etc. low dropout design.
- The touch sensor switch module and the back of the circuit board are touch-sensitive surfaces, and the double-sided adhesive is very convenient for pasting on the surface of glass, plastic, rubber, acrylic, ceramics and other media.
- Power-on state: Support power-on boot(direct output voltage) / power-on standby(Default setting, closed output). Power-on boot state: led light on, output voltage = power voltage; In standby state: LED light off, output voltage=0V.
- Operating voltage: DC 3V-30V, ultra-low standby current 2uA within 5V, operating current: 0-2A, round board diameter 2cm/0.78inch.
- Operating Mode: Support Latching/Jogging mode (The default state is latching mode: press once to open, and then press once to close); If set in jog mode: There is output when touched, but no output when released.
8.8Very Good
View offer on:
Show more
7
YogcowYogcow Concealed 12V LED Touch Dimmer Switch, DC 3.7-24V 72W Touch Sensor Stepless Dimming Switches for Smart Home LED Strip Lights, Penetrable Wood, Stone, Glass and More, No Hole Required (White)
Main highlights- Smart touch control: short touch light on/off, keep Long press to stepless dimming.The switch has memory funtion,When you turn on the light again,the light brightness will be the same as last time automatically.( Automatically reset after a power failure).
- Partition touch switch: Penetrates wood panel, stone panel, stone, paper, acrylic, plastic, glass and other non-metallic materials. Max thickness 3cm, The different thickness sensitive is different, the thinner the better, Please not near metal materials to avoid interference.
- LED dimmer switch input: 3.3-24V DC, 5volt and 12volt max current is 5A. 24volt max current is 3A. LED Dimmer Compatible various constant voltage LED lights, such as monochrome hard light bar, soft light strip.(Note: this dimmer can not connect to a constant current power).
- Easy installation: Just peel off the double-sided adhesive sticker included with the touch dimmer to attach the switch to the back of the panel, and then use the two wiring clips to connect to the power and the light, without soldering.
- Concealed touch light switch, Often used to control LED strip lights, LED light bar, table lamps, suitable for cabinets, wardrobes, desks, bookshelves, Showcase, vanity mirrors, wine coolers, caravans and more.
8.7Very Good
View offer on:
Show more
8
LDCRELed Dimmer Switch Dc 12v Touch Sensor Dimmer Switches for Led Lights On/Off Stepless Dc 3.7v-12v Desk Lamp Strip Brightness Controller Switch for 10mm/0.39" Mounting Hole 2pack Black
Main highlights- This Led Dimmer Switch for Led Lights is Often Used As Dc12v Switch, Also Can Be As a Led Touch Light Switches for Led Lights from 3.6v to 15v. Please Make Sure Your Driver is a Constant Voltage Driver Since This Dimmer Switches Can Be Connected to Constant Voltage Driver Only. and This Led Dimmer Switch Must Cannot Be Connected to the Constant Current Driver. You Can Check the Picture to See the Difference Between the Constant Voltage Driver and Constant Current Driver.
- The Led Dimmer Switch with Cord is Recessed Installation, Its Mounting Hole Size is 10mm/0.39", Save Space, Sensor Switch Can Be Easy Connected to the Led Lights.
- Package Includes 2 Pack 12v Touch Dimmer Switches for Led Lights
- 12v Volt Switch for Rv, Cabinet, Wine Cooler, Display Cabinet, Closet, Etc. 12v Light Sensor Switch Dimmer Also Used to Control Led Lights Such As Table Lamps, Ceiling Lights, Pendant Lights and Other Smart Appliances, You Can Run Led Switch on Other Items.
- 12 Volt Dc Led Dimmer: Dc Switch Input Voltage: Dc3.6-15v; Operating Current 2.5a, Rv 12v Dimmer Switch Intelligent Control, Just Touch On, Touch off Again, Press and Hold the Dimmer Switch to Adjust the Light Brightness from 0% to 100%, Touch Lamp Dimmer Control Switch Module Long Press for Stepless Dimming and Control Your Lights.
8.6Very Good
View offer on:
Show more
9
SenskySensky 12V 24V DC Touch On/Off Sensor Switch Touch Dimmer Switch Brightness Adjustment for LED Cabinet Light, LED Strip Light, Rigid Light Bar
Main highlights- Widely Used: It directly can drive led lighting products, such as led cabinet lights, led rigid bar, led strips and led panel light.
- Touch Switch ON/OFF: Short touch items with fingers, touch time less than 5 seconds, it is on/off switch function for led light.
- Touch Dimmer Switch: Long touch item, when the touch time is more than 5 seconds, it is dimming function, the brightness will be raised to the highest or dropped to the lowest.
- Input Voltage: DC 12V/DC 24V Max Load Current: 3A
- Easy to Install: The touch dimmer switch comes with adhesive tape for mounting the switch to any clean, flat surface.(Please don't stick on the place with metal)
8.3Good
View offer on:
Show more
10
LDCREDimmer Switches for Led Lights Dc 12v Touch Lamp Control Switch with Cord Sensor Stepless Lamp Dc 3.7v-12v Desk Strip Brightness Controller Dimmer 13mm/0.51" Hole 2pack Black
Main highlights- This Led Dimmer Switch for Led Lights is Often Used As Dc12v Switch, Also Can Be As a Led Touch Light Switches for Led Lights from 3.6v to 15v. Please Make Sure Your Driver is a Constant Voltage Driver Since This Dimmer Switches Can Be Connected to Constant Voltage Driver Only. and This Led Dimmer Switch Must Cannot Be Connected to the Constant Current Driver. You Can Check the Picture to See the Difference Between the Constant Voltage Driver and Constant Current Driver.
- The Led Dimmer Switch with Cord is Recessed Installation, Its Mounting Hole Size is 13mm/0.51", Save Space, Sensor Switch Can Be Easy Connected to the Led Lights.
- Package Includes 2 Pack 12v Touch Dimmer Switches for Led Lights
- 12v Volt Switch for Rv, Cabinet, Wine Cooler, Display Cabinet, Closet, Etc. 12v Light Sensor Switch Dimmer Also Used to Control Led Lights Such As Table Lamps, Ceiling Lights, Pendant Lights and Other Smart Appliances, You Can Run Led Switch on Other Items.
- 12 Volt Dc Led Dimmer: Dc Switch Input Voltage: Dc3.6-15v; Operating Current 2.5a, Rv 12v Dimmer Switch Intelligent Control, Just Touch On, Touch off Again, Press and Hold the Dimmer Switch to Adjust the Light Brightness from 0% to 100%, Touch Lamp Dimmer Control Switch Module Long Press for Stepless Dimming and Control Your Lights.
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for waterproof touch sensor switch
