Trimble Gps Receivers of 2025
Best Choice1
HilitandHigh Accuracy GPS Receiver Antenna with Low Noise Amplifier, IP68 Grade, for Agriculture, Deformation, Navigation and Locating
Main highlights- [Wide Application] Ideal for Beidou 2, GPS, GLONASS navigation, this antenna is widely used in geodesy, agriculture, oceanography, and more for precise navigation and locating.
- [Small Measuring Error] In GPS measurement, this antenna adopts single-layer multi-feed ultra wideband design, minimizing phase center difference for precise results.
- [Low Noise Amplifier] Featuring a pre-filtering technology that suppresses out-of-band interference , this antenna improves reliability and accuracy.
- [Ip68Grade] and with high compressive strength, the UV-resistant cover ensures long-term outdoor use for high accuracy measurement.
- [Good Reception Effect] With high gain and excellent reception on low satellites, this antenna ensures normalcollection even in obstructed areas.
9.7Exceptional
View offer on:
Show more
How do we rank?
Using our advanced technology, we scan thousands of products and stores, analyzing reviews, ratings, and trends to find what matters most to users like you.Our team then reviews the data and real user feedback, combining AI and human insights to bring you real-time, top-rated recommendations to guide your decisions with clarity and confidence.
Value for Money2
SZRMCCSZRMCC Trimble GPS RTK GNSS Receiver 5700 5800 R6 R7 R8 R10 46125-20 Replacement Power Cable Alligator Clips to 0B 7 Pin…
Main highlights- Use the Alligator Clips to connect an 12V extended battery to power the Trimble GPS 5700, 5800, R6, R7, R8, SPS, 4700, 4800, RTK, such as a car battery....
- Trimble 46125-20 replacement. Will work with following Geodimeter Total Station systems: Trimble GPS 5700, 5800, R6, R7, R8, SPS, 4700, 4800, RTK. Trimble R10 GNSS Receiver
- Plug A: Alligator Clips Connector; Plug B: 0B 7 pin Male Connector + 15A fuse.
- Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
- Cable Length : 70.8Inches/1.8m (We can customize with other length, please contact us if you need).
9.6Exceptional
View offer on:
Show more
3
BINGFUBingfu RTK Radio Antenna 400MHz-470MHz Soft Whip TNC Male Antenna Aerial for RTK Survey GPS Receiver GNSS System Trimble Topcon Leica Sokkia Surveying Instrument
Main highlights- UHF Radio Frequency Range: 400-470 MHz;
- Package List: 1 x Antenna (As the Picture Shown);
- Gain: 5dBi; Direction: Omni-directional;
- Connector: TNC Male Connector; Feature: Short Soft Whip Antenna;
- Application: Trimble Topcon Leica Sokkia RTK Surveying Instruments RTK Survey GNSS GPS Receiver Network Antenna;
9.4Excellent
View offer on:
Show more
4
Artisan PowerArtisan Power Replacement Battery for Trimble GPS Receiver Systems | 2600 mAh | Li-ion Rechargeable Battery Pack | Made in Japan Cells by Panasonic | Replace Trimble Battery 54344, 92600, and 52030
Main highlights- MANUFACTURED BY ARTISAN POWER: When it comes to reliable accessories, Artisan Power stands out. As a leader in replacement products, they prioritize user satisfaction and product excellence. There products reflects their commitment to quality, ensuring that you get the best.
- HIGH CAPACITY: With a powerful 2600 mAh capacity, our replacement battery offers extended operational time, ensuring that your trimble GPS receiver remain powered throughout your workday. This high-capacity battery is particularly beneficial for long surveying sessions or extended fieldwork.
- EASY INSTALLATION: Our replacement battery is designed for user-friendly installation, allowing you to quickly and easily replace your old battery without the need for specialized tools or technical expertise. This convenience is particularly valuable for professionals.
- DURABILITY AND RELIABILITY: Our replacement battery is manufactured from high-quality materials that ensure durability and longevity. Our battery’s reliable performance ensures that your Trimble GPS Receiver Systems operate at their best, providing accurate and dependable data collection.
- COMPATIBILITY: Our replacement battery is designed to be the perfect power solution for a wide range of Trimble GPS Receiver Systems, including R8, R7, R6, R-8, 5700, 5800, 29518, and MT1000. This battery ensures that you can seamlessly switch between different devices.
9.3Excellent
View offer on:
Show more
5
BINGFUBingfu RTK Survey GPS Base Antenna Radio Extension Cable RP-N Male to RP-TNC Male RG58 Coax Jumper Cable 3m 10 feet for GNSS RTK Survey Receiver Trimble 51980 GPS SPS855 SPS 855 851 852 SNB 900 850
Main highlights- 【Please Note】 - The connector is (RP-N Male to RP-TNC Male) -- 【RP-N Male: a hole in connector center】 -- 【RP-TNC Male: a hole in connector center】 --> please know the difference between (RP-N)/(RP-TNC) and (N type)/(TNC type) before purchase;
- Package List: 1 x Cable (As the Picture Shown)
- GNSS RTK Trimble Base Antenna Radio Cable:Good quality, easily connect receiver to external antenna and flexible measurement,ideal for base stations;
- Connector Type: RP-N Male to RP-TNC Male; Cable Type: RG58 50 Ohm Coaxial Cable; Cable Length: 3m / 10 feet;
- Compatible with:Trimble GNSS RTK Survey Vehicle Marine Boat GPS GALILEO GLONASS BDS Navigation Receiver;
9.2Excellent
View offer on:
Show more
6
LS2015New Quick Release Adapter For RTK Compatible For Trimble R10 R12 R12i GNSS Receivers, RTK Quick Release Adapters GPS GNSS Quick Release Adapters
Main highlights- 【Worry-free service】You could use our adapter once you received it;If you find a defect,or any problem with the adapter, please contact us at your convenience!
- 【Wide Range Of Use】 The adapter is compatible for R10, R12, R12i GNSS Receivers；Compatible for GNSS RTK GPS measure equipment/total station/Levels.It is an essential tool for professional surveying and mapping professionals.
- 【Save Time And Effort】1-Handed Operation.Our quick release adapter for GPS ensures swift attachment and detachment of GNSS/GPS/GNSS surveying equipment, Reduce damage to instruments, Save your time and energy.
- 【RTK Quick Adapters】Height：50mm；Product size：1.4in (3.5cm)*1.4in (3.5cm)*2.76in(7cm）；Material：Aluminum；
- 【New Upgrade】With super high quality durable materials, this quick-release adapter for RTK Surveying guarantees a stable and reliable connection for your surveying tools, providing lasting performance.
8.9Very Good
View offer on:
Show more
7
HangTonHangTon 12V Power Cable for Trimble R7 R8 R9 R10 R12 5700 5800 SPS985 GPS RTK GNSS Receiver, 7 Pin to Clips
Main highlights- Safe power cable with fuse
- Fit for all Trimble 7-pin instrument, such as SPS985 SPS851 and RTK
- External power cable for Trimble R9 R8 4800 R6 4600 R7 4700 GPS Receivers and Trimble R10 R12 GNSS receiver
- Connectors: 0B 7-pin connector to alligator clips
- Cable: 46125-20. Length: about 1.8 meters /6ft
8.8Very Good
View offer on:
Show more
8
Generic7 Pin to Alligator Clips GPS Power Cable for Trimble 4700 4800 5700 5800 R6 R7 R8 R10 RTK GNSS Receiver External Battery Power Cable, 46125-20
Main highlights- Safe power cable with fuse. It comes with 7-pin (0B) size, heavy-duty alligator clips that are fuse-protected
- Power it by connecting to a 12V battery. Built with high-quality components and a precise 10-amp fuse
- Model: 46125-20 Replacement, Cable Length: about 1.8 meters / 6ft, 210 grams
- It's compatible with all Trimble 7-pin instruments, such as SPS985 SPS851, External power cable for Trimble R12 R10 R9 R8 R7 R6 4600 4700 4800 5700 5800 GNSS receiver Total Station RTK Base 450 900 GPS Receivers
- External battery power cable for Trimble R12 R10 R9 R8 R7 R6 4600 4700 4800 5700 5800 GPS GNSS receivers
8.6Very Good
View offer on:
Show more
9
GlobalSatGlobalSat BU-353N USB GPS Receiver, Black Made in Taiwan
Why we love it
Quick satellite acquisition indoors with no clear sky view.
Plug and play setup for Windows and Victron Cerbo GX.
Reliable performance over years and multiple devices.
8.5Good
View offer on:
Show more
10
HangTonHangTon RG58 Antenna Cable TNC Connector for Trimble Topcon Leica GNSS GPS Receiver to Pacific Crest ADL TDL XDL Satel Easy Epic Pro Zephyr, Right Angle, 2.8m
Main highlights- Yellow TNC antenna cable for Trimble BX992 Marine R7 R8 R750 MPS566 SPS-750 SPS55xH SPSx61 SPS-850 SPS-880 5700 5800 / Net RS GNSS GPS receiver to Zephyr and Zephyr Geodetic GPS GNSS antenna / dual-frequency rover antenna GA530 GA830
- Low-loss coaxial RG58 antenna cable for GPS GNSS Receiver to antenna
- Length: 2.8 meter, part number 58957
- Connector TNC male straight to TNC male 90-degree right angle
- Antenna cable for Topcon HiPer V / Legacy E / HiPer Lite / HiPer II, for Leica Sokkia GPS GNSS receiver, for Spectra SP90 GNSS receiver, for Pacific Crest ADL 450 / TDL 450 / XDL, for Satel Easy Pro Epic Pro base station, GPS GNSS antenna, RTK and more surveying instrument
8.4Good
View offer on:
Show more
Similar products on Amazon
