10 Best Tri Clamp Brewing In The Us - Black Friday 2024
Best Choice1
DERNORDDERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5" Tube OD)
Main highlights- Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp
- Tri-Clamp butterfly valve Max Pressure 1.6MPA
- The pull style handle allows you to set the valve in three different positions simply by pulling and turning
- Temperature Rating (spec): 15°F thru 200°F; Material (spec): 304 Stainless Steel
- 100 Percent pressure hydraulic tested for reliability
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DERNORDDERNORD 2 Inch Tri-Clamp 240V Water Heating Element Immersion U Type Electrical Brewing Boiler Heater (240V 6000W)
Main highlights- With SUS304 Materials Cap, easy to Install and fits Standard 2" tri-clover American coupler
- Tri-clamp connection: 2" Tri Clamp; Ferrule Size: 64mm Pipe OD
- SUS304 Tri-clamp U Type heating element provides 6000w 240v of power
- Ordinary elements wouldn't be burned out by dry firing, lime deposits, and sand. out ordinary elements
- Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm
9.5Excellent
View offer on:
Show more
3
semfeil brewSemfeil Brew 1.5" Tri Clamp Bulkehad Brew Kettle Pot Weldless Tri Clamp Bulkhead 304 Stainless Steel Homebrew Kettle Tri Clamp Bulkhead 1.5" Bulkhead Fitting
Main highlights- Weldless Design Tri Clamp Bulkhead Fitting Ideal for FTSs and Brew Bucket flat lid pressurized transfers
- Tri clamp bulkhead fitting The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
- The 304 Weldless Tri Clamp bulkhead Stainless Construction and High heat compatible silicone gaskets.And add 1PCS extra sealing ring
- Add a 1.5" Tri Clamp Bulkhead flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket..
- 1.5 Ttri Clamp Bulkhead Works on kettle as small as 12" in diameter.
9.4Excellent
View offer on:
Show more
4
Hilangsan(2 pack) Hilangsan 1.5" Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle
Main highlights- 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily.
- 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!
- 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking.
- 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter.
- 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined.
9.1Excellent
View offer on:
Show more
5
DERNORDDERNORD 1.5 Inch Tri Clamp Tee 3 Way Instrument Tee Fittings Stainless Steel 304,38mm Pipe OD for Brewing System
Main highlights- Tri-Clover Instrument Tees look simalar to the standard long Tees, however they have a shorter center leg which minumizes this unused dead space.
- Tee with three openings for connecting and branching three pipes or tubes
- Pipe OD: 38mm （1.5"）
- High pressure durable, stainless steel 304 for resistance to corrosion and high temperatures
- Ferrule Size: 50.5mm fits 1.5" ferrule tri clamp
9.0Excellent
View offer on:
Show more
6
DERNORDDERNORD Stainless Steel Quick Disconnect Set -Beer Brewing Tri Clover Connector Kit (Barb male/tri clamp female)
Main highlights- SAVE TIME: Quick disconnects make setup and clean up a breeze so you can get down to brewing!
- INCLUDES: One 1/2" barb hose and one 1.5" Tri clamp fitting
- HIGH QUALITY: Heavy duty stainless steel construction to look great and last a lifetime, and high temperature O-ring ensures a tight seal every time.
- EASY SANITATION: Easy to install and disassembled,quick disconnect allow for easy sanitizing during your brew day.
- CONVENIENT: Easy connection to plate chillers and wort pumps.
8.9Very Good
View offer on:
Show more
7
semfeil brew3" Tri Clamp Ball Lock Stainless Conical Fermenter Convert Lid with Gas Post Beer Post PRV 80cm Silicone Hose Conical Fermenters Pressurized Transfers Fermentasaurus Homebrew Kegging Equipment
Main highlights- We design this convert lid to make any container with 3" Tri Clamp opening to be a ball lock keg.
- This lid comes with beer post, gas post, pressure relief valve, just attach the silionce hose to the end of the beer post, then it works the same as a cornelius ball lock keg.
- The max pressure: 2.5 bar (36 psi) Please depressurize before removing lid.
- Ferment under pressure or carbonate the Fermentasaurus without exposing your beer to oxygen.
- Also this lid is ideally suited to also fermenting under pressure so you can use a spunding valve so you can naturally carbonate during primary fermentaion.
8.8Very Good
View offer on:
Show more
8
beduanBeduan 1.5" Tri Clamp Ball Valve Stainless Steel Sanitary Valve for Home Brew, Brewing (1 inch Tube OD)
Main highlights- 【Working Temperature】-80 Degrees to 350 degrees Fahrenheit.
- 【Size】1" tube OD and 1.5" tri clamp on both ends,connecting to another 1.5" tri clamp with silicone gaskets and single pins.
- 【Package Include】1pcs sanitary ball valve and 2pcs silicone gaskets.
- 【Maximum Pressure】1.5 Mpa.
- 【Material】Food Grade Stainless Steel 304.
8.7Very Good
View offer on:
Show more
9
CRBrewBeer304 stainless steel Cornelius Keg Lid with 1.5" Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper
Main highlights- Our corny beer keg lid with 1.5 inch ferrule is a great addition for the corny beer kegs.
- More Sturdy: Made of 304 stainless steel.
- Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
- Corny Beer Keg Lid with 1.5" Tri-clamp Ferrule.
- 1.5"TC ferrule is widely used in the homebrew products. You can find many fastic products with 1.5"TC ferrule connection.
8.6Very Good
View offer on:
Show more
10
N\P2" Tri-Clamp Ball Valve for home brewing, Stainless Steel 304, 2" Tude OD, PTFE Lined
Main highlights- Maximum Temperature: 300°F; Working Pressure: 1.6Mpa for WOG
- Material: SS304; Surface: Polished
- Lockable Lever Handle: Manual 1/4 on/off Control; Easy to Operate and Clean
- Connection Type: 2inch Tri Clamp; Tube OD: 2in
- Application: Chemical, Hydraulic, Dry/Liquid Chlorine, Food Processing, Oxygen, Steam, Thermal Fluids, Vacuum, Water/Oil/Gas
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for tri clamp brewing
