10 Best Trailer Turned Into Camper In The Us - Black Friday 2024
- 17% Off
3 in 1 Sleeper Sofa Couch Bed, Small Tufted Velvet Convertible Loveseat Futon Sofa w/Pullout Bed, Adjustable Backrest, Cylinder Pillows for Living Room Apartment, Easy to Assemble, Grey, 55.5"
9.3 Easy to build8.0 Comfort8.0 worth the moneyWhy we love it
Modern Design: Stylish, Comfortable
Adjustable Backrest: Customizable Posture
Convertible Pull Out: Overnight Guests
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
PartsamPartsam 2Pcs Rectangle LED Trailer Camper RV Triple Tail Lights Stop Turn Tail Backup Reverse Lights Taillights Vertical and Horizontal Mount - Red and White
Main highlights- [Package Content] 2pcs rectangular trailer lights (Screws included)
- This rectangular trailer light has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;
- This Triple LED Trailer Light is hardwired with 6 wires: White is the ground, Blue is backup/reverse light, green and yellow is high mode for stop or turn signals, black and brown is low mode for tail or running lights;
- This RV tail light serves four functions: stop light, turn signal light, and taillight, and backup light in the center, this is white LEDs. It is a really nice low profile light for the back of your trailer or RV or motor home. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;
- Overall dimensions: Overall length is 14 inches approx., and overall width is about 6-7/8 inches, and the light is about half an inch thick, but with the little knob where the wires all come out, it's about 1 inch, so you may need to cut out a hole to allow that to go in. The spot knob is about 1 3/16 inch in diameter. Really a nice slim profile unit;
9.8Exceptional
View offer on:
Show more
3
RV Camping Camper HumorCamper Trailer RV Gift Vintage Funny I'm Sexy and I TOW It T-Shirt
Main highlights- Lightweight, Classic fit, Double-needle sleeve and bottom hem
- I'm Sexy and I TOW It - for people who camp and have a great sense of humor!
- A funny retro style RV, Camper, Travel Trailer, design and/or gift
9.6Exceptional
View offer on:
Show more
4
PartsamPartsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light 49 LED with License Bracket Holder and White Base 12V Sealed w Reflex Surface Mount (Left + Right)
Main highlights- left hand driver's side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger's Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments.
- It is designed to mount on the surface of a trailer and Camper etc.; there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.
- Easy Installation: This light is Surface mount, which means that it installs flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
- Dimension: overall length: 8 5/8", The height: 3 7/8" and the total depth is 1 3/5"; Mounting Holes are Approx. 7" by 2 1/2" Apart.
- 8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.
9.5Excellent
View offer on:
Show more
5
Lamrok Outdoor ProductsTurn on Your Camper Lights RV Lights with LITESWICH 2.0 Camping Accessories
Main highlights- Turn on your camper RV lights
- The ORIGINAL product US Patent number 9,375,987
- No extra equipment needed
- Light up your camper and showcase your investment
- 7 pin connection safe to use
9.3Excellent
View offer on:
Show more
6
Camco37% OffCamco Trailer-Aid Plus - Tandem Trailer Ramp Provides 5 1/2" of Tire Lift — Great for RVs, Campers & More - Must Have Travel Trailer Accessories — Easy to Use, Yellow(21002)
Main highlights- No Unloading Needed: This RV trailer accessory allows you to change a flat tire without removing horses or cargo, saving you time and effort. It streamlines the tire-changing process, making it more efficient.
- Lightweight & Portable: Weighing just 8 lb, the Trailer-Aid Plus is easy to carry by hand. Its compact size and lightweight design ensure effortless storage when not in use.
- Impressive Weight Capacity: The Trailer-Aid tire ramp can withstand up to 15,000 lb, providing robust support for your trailer during tire changes and maintenance tasks.
- Heavy-Duty Construction: Crafted from strong, lightweight polymer, this camping trailer must-have is both waterproof and rustproof, ensuring durable and reliable performance for all your tire changing needs.
- Ample Lift for Easy Tire Changing: Featuring an impressive 5 1/2" lift— 1" higher than the original Trailer-Aid— this Trailer Aid tandem tire changing ramp provides extra clearance, making it ideal for routine maintenance tasks on RV trailers.
9.2Excellent
View offer on:
Show more
7
PartsamPartsam 2Pcs LED Truck Trailer Tail Lights Bar Kit 40 LED Waterproof Tail Turn Signal Brake Light Running Reverse Light with Iron Net Protection 5 Wires 10V-30V for Truck Boat Trailer UTV RV Camper
Main highlights- [Waterproof] IP65 waterproof trailer tail light, capable to withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles
- [Package Content] 2pcs 40 LED Trailer Tail Light Bar. It is ideal for most towing vehicles equipped with 10V to 30V DC power supply, such as RV, campers, trailers, trucks, UTEs, UTVs, engineering vehicles, loader, boats, flatbed, vans, caravans, Excavator,Reaping machine and so on,can improve safety give your car a new look;
- Trailer tail light bar adopts 40 pcs advanced LED with high brightness, long lasting, bright LED technology. Over 100% brighter than Stock units. Life span of over 50,000 hours. Our replacement trailer tail lights may very well outlast your truck! We do build a 2" X 4" reflector into the red portion of the lens, which will make them legal to use;
- There is Iron bracket on the backseat and the iron net in front of the lampshade, which is stronger than others such as just pure plastic and protect the whole LED light bar effectively and prolong its service life;
- 5-WIRE connection system for Negative, Turn Signal, Brake Light, Running Light and Reverse Light: Black Wire - Negative; Red Wire - Brake Light; Green Wire - Tail/Running Light; Yellow Wire - Turn Signal Light; White Wire - Reverse Light; There are two mounting studs on the back with nuts to lock them in place. just cut your current tail lights wire harness one by one and match them to the new trailer lights color guide; NOTE: Two holes may need to be drilled to install;
9.1Excellent
View offer on:
Show more
8
NilightNilight 7 Way Trailer Plug Y Pigtail Splitter Double Brasse 7 Pin Female to Dual Male Trailer Plug Round Blade Connector for Connecting Slide in Truck Camper and Trailer Y Splitter
Main highlights- Package Includes: 1x 7 Way Y Splitter (1 Female End to 2 Male End).
- Easy Installation: Simple Plug and Play design makes easy installation, this 7 way trailer splitter requires no cutting or splicing, just plugs into the existing sockets and you are able to run the lights on your slide in truck camper and trailer at the same time with this 7 way Y splitter.
- Durable Construction: For long-lasting use and a reliable connection, the double prong brass contact for the female plug has a outstanding contacts which is better than the single prong plugs. And the housing of the 7-pin socket is made from durable molded black plastic and has a spring-loaded dust cover to protect the connection points. Protect it from heavy rain, snow and mud.
- Double Trailer Combination: It is used for towing a double trailer combination. This 7 Way Female to Dual 7 Way Male plug is commonly used at half-ton, 3/4-ton, one-ton, long bed, short bed, dually or whatever type of truck as long as it equips with 7 pin RV socket. You can pull a trailer behind the truck with a slide in camper in the bed so you need plug ins for both. This is a great alternative to running another wiring harness and connector to the side of the bed.
- Application: This trailer Y splitter combines 1 female plug and 2 male plugs. It is a Female that plugs into your Truck and 2 Male plugs that you can plug a Trailer into then you have a spare plug. With this product, you can run the lights on the slide-in camper and boat trailer at the same time. Suitable for the most truck which has a 7-way round plug, including trailers, RVs, campers, boat trailers, and trucks.
9.0Excellent
View offer on:
Show more
9
Nilight10% OffNilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 5 Wire System
Main highlights- Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights; Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc.
- IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible
- Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off
- 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation.
8.9Very Good
View offer on:
Show more
10
LINKITOMLINKITOM 40 LED Truck Tail Light Bar, Super Bright Turn Signal Brake Reverse Tail Light with Iron Net Protection for 10-30 Volt Truck Boat Snowmobile Trailer Pickup RV Camper UTV UTE Vans
Main highlights- Widely Used: come with bolts and screws and Gasket, surface mounting; Ideal for 5 wire system vehicles with DC 10-30V Power Supply, , such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Not work with cars that have brake ligyts and signal on one circuit
- Waterproof: Waterproof Rate:IP65. it can work on heavy rainy weather or in heavy snow weather
- SUPER BRIGHT: 40 Hi-intensity Rectangular 3-colored LED with clear transmittance PC cover , high visibility in daylight, midnight, raining or fog days. Improve the driver security and avoid accidents
- Easy Installation - Design with 5 WIRES connection system:Black wire: Ground wire. Red wire: brake light. Green wire: tail/running light. White wire: reverse light. Yellow wire: turn signal light.
- Compliant with DOT standards: The lamp shade of utility trailer light with a new PC material, The iron bracket on the backseat and the iron net in front of the lampshade, protect the whole LED light bar effectively. Build a red reflection into the red portion of the lens. Compliant with DOT standards
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for trailer turned into camper
