10 Best Thermometer Module In The Us - Black Friday 2024
Best Choice1
ThomasThomas - 4376 Traceable Snap-In Module Thermometer, -58 to 572 degree F, -50 to 300 degrees C
Main highlights- Minimum/Maximum temperature memory for monitoring accuracy of temperature
- Measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with an accuracy of + or - 1 degree C
- Digital thermometer for monitoring temperature in liquids, gases, refrigerators, freezers, and water baths
- Calibrated to ISO 17025 traceability standards for reliability of measurements
- 2.75" stainless steel probe is attached to base by 10-foot cable
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Raspberry PiContact-Less Infrared Temperature Sensor IR Module High Precision High Resolution Fast Response 3.3V/5V @XYGStudy
9.3 Simple to use8.7 Precision8.2 Temperature controlWhy we love it
Measures temperature without touching the object.
High precision and fast response time.
Easy to use with Arduino, reasonably accurate.
9.6Exceptional
View offer on:
Show more
3
UCTRONICSUCTRONICS -30-800 Degree Centigrade Digital Temperature Meter Blue LED Display K-Type Thermocouple Temp Sensor 2-Wires Reverse Polarity Protection with Black Case
Main highlights- Wiring is simple, then the red is for positive, and black for negative
- This -30-800 degree Centigrade Digital Temperature Meter is easy to setup and read, maximum humidity: 90% -100% (use in the no condensation environment)
- Temperature measuring range: -30-800 degree centigrade. If the temperature is within 100 degree, the display format is with 1 decimal. If the temperature is over 100 degree, the display format is with integer
- It is design with reverse polarity protection, positive and negative reversed will not burn, but the screen display nothing
- Include K-type temperature probe
9.4Excellent
View offer on:
Show more
4
MICREEN2 Pack Temperature Sensor Module Kit with Waterproof Stainless Steel Probe, Temperature Sensor Chip for Arduino and Raspberry Pi
Main highlights- What You Get: 2 set Temperature Sensor Module Kit (temperature sensor, pluggable terminal adapter, 3pin cable) and 2 pcs direct insertion temperature sensor chip.
- Temperature Sensor Module Kit: Pull-up resistor included on the adapter module, connect directly to the GPIO of the Raspberry Pi.
- Suitable For: Stainless Steel Probe can measure the temperature directly in water or soil and it is widely used in temperature monitoring for fish tanks, equipment, machinery, greenhouses.
- Direct Insertion Temperature Sensor Chip: Programmable Resolution 1-Wire Digital Thermometer (Need to be used with pull-up resistor).
- After-sale Service: If you have any questions, please contact or QA us, we will provide you satisfied solutions.
9.2Excellent
View offer on:
Show more
5
GowoopsGowoops 2pcs DHT22/AM2302 Digital Humidity and Temperature Sensor Module for Arduino Raspberry Pi, Temp Humidity Gauge Monitor Electronic Practice DIY Replace SHT11 SHT15
8.7 Simple to use8.0 worth the money8.0 Precision9.0Excellent
View offer on:
Show more
6
HiLetgoHiLetgo 5pcs Digital LCD Thermometer Temperature Digital LCD Fridge Thermometer Water Temperature with Probe Fahrenheit
Main highlights- Temperature range: -50~ 230 Fahrenheit
- Temperature display resolution: 0.1
- Size: 47*28*14mm
- Probe wire: 1M Length
- Digital LCD Fridge Thermometer, It only suitable for Fahrenheit,not for Celsius
8.8Very Good
View offer on:
Show more
7
AITRIP2pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V with Wires for Arduino Raspberry Pi 2 3 (2pcs DHT11)
Main highlights- Working voltage: DC 3.3V-5V.Output form: digital output.
- The single-wire wiring scheme makes it easy to be integrated to other applications.And the simple communication protocol greatly reduces the programming effort required.
- Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.
- Humidity Measure Range 20%-95%,humidity measurement error: +-5%; Temperature Measure Range 0-50°C,temperature measurement error: +-2 degrees.
- DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.
8.6Very Good
View offer on:
Show more
8
HiLetgoHiLetgo GY-906 MLX90614ESF Non-Contact Infrared Temperature Sensor Module IIC I2C Serial for Arduino
Main highlights- The user can configure the digital output to be pulse width modulation (PWM). As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in range of -20 to 120°C, with an output resolution of 0.14°C.
- The thermometer comes factory calibrated with a digital SMBus output giving full access to the measured temperature in the complete temperature range(s) with a resolution of 0.02°C.
- MLX90614 is an infrared thermometer for non-contact temperature measurements.
- Integrated into the MLX90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.
- Both the IR sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can.
8.3Good
View offer on:
Show more
9
DKARDUDKARDU 2 pcs W3230 Digital Temperature Controller Module DC 12V 20A LED Thermostat Thermometer Temperature Control Switch Sensor Meter with Waterproof Probe -50℃ to 120℃ with red and Black Cable
Main highlights- Wide range of uses: W3230 temperature switch can be widely used in temperature control systems such as household freezers, water tanks, refrigerators, steamers, and industrial equipment.
- What it does:The W3230 is a high-precision temperature controller module with led digital display, which can be used for heating or cooling control.-50-110 degrees Celsius ultra-wide temperature control range, applicable to different temperature controlled system.
- Two modes: LCD digital thermostat can choose cooling or heating working mode; therefore, you can freely switch modes according to actual needs to meet your one-time purchase needs.
- High-quality materials: The thermostat is made of ABS material shell, exquisite and beautiful, 1.8mm ultra-thick design, high mechanical strength, good electrical performance.
- High-definition display: Clear LED display, two-color display, red shows the actual temperature, blue shows the set temperature, clear display, can be read clearly no matter it is applied in day or night.
8.0Good
View offer on:
Show more
10
HiLetgoHiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-Channel Relay and Waterproof
Main highlights- Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
- Embedded CPU chip (MCU), more intelligent, lower power consumption.
- Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
- Automatic power set memory (MCU built-in EEPROM memory unit).
- 100% complete machine patch, wave soldering, stable performance, good consistency.
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for thermometer module
