10 Best Tester for Smd In The Us - Black Friday 2024
Best Choice1
SMD Steve Meade DesignsSMD Distortion Detector DD-1
Main highlights- Signal present LED trigger voltage 750 mvrms
- Operating range of input signal is 1.2 vrms a" 125 vrms, (15, 000 watts at 1 ohm)
- Distortion detector/analyzer (dd1)
- Distortion detector's circuitry is 100% analog
- Distortion detection trigger level > 1.0% harmonic distortion
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
GeevorksMESR-100 Capacitor Tester V2, Geevorks Professional Capacitor Tester, Ohm Meter 0.001-100.0R with SMD Test Clip, Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit
Main highlights- This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing.
- Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.
- During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】
- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing.
- Capacitor tester is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition.
9.7Exceptional
View offer on:
Show more
3
FNIRSIFNIRSI LCR-P1 Transistor Tester, Mosfet Transistor Capacitor Tester, SMD Electronic Component Tester, Diode Triode Zener Diode Resistance Inductance Battery Test LCR Meter MOS PNP NPN ESR Meter
Main highlights- Transistor Capacitor Tester: FNIRSI LCR-P1 transistor tester can be used for the measurement and analysis of patch component, NPN, PNP, triode, MOS, field effect transistor (FET), diode, Zener diode, capacitor, resistor, inductor, battery, etc
- NEC Infrared Waveform: FNIRSI LCR-P1 transistor detector supports the analysis of NEC infrared protocol code, so it can be used for the debugging and maintenance of remote control equipment, and provides users with comprehensive detection and analysis
- Intelligent automatic identification: Capacer tester intelligent automatic detection of component pins definition and parameters, and can quickly identify its models and specifications, thereby greatly improving the efficiency of work
- Friendly Design: The design of the replaceable patch seat enables measurement of both tiny precision components and high-power devices. 1.44 inch full-color screen, 300 mah battery, Type-c interface for charging and data transmission, firmware upgrade
- Anti-burn protection mechanism: The capacitance resistance esr tester automatically identifies undischarged capacitors and automatically discharges them at the moment of insertion and locking, effectively avoiding accidental burning
9.4Excellent
View offer on:
Show more
4
FNIRSIFNIRSI LCR-ST1 10KHz LCR Meter Tweezer, Mini Smart SMD Tester, ESR Meter, Capacitance Inductance Continuity Diode Tester, Auto Component Recognition Electronic Component Analyze
Main highlights- 【Multiple functions】D, Z, Q, R, ESR value reading. Auto recognition of elecronic components, primary and secondary parameters display. 1.14'' HD color display, is easy to operation
- 【Measurement Range】3 test frequencies – 100 Hz, 1 kHz, 10 kHz. 2 test voltage - 0.3 Vrms, 0.6 Vrms. R: 10 mΩ to 10 MΩ / C: 1 pF to 22 mF / L:1 uH to 10 H
- 【LCR Tweezer Tester】The FNIRSI LCR-ST1 is a multifunctional and portable testing instrument that supports precise measurement of resistance, capacitance, inductance, and diodes
- 【Data Storage and Export】The LCR tester can automatically save the test records. And you could connect the tester to your PC and transfer all the data to PC via EXCEL
- 【2 Types of Tweezer Heads】With pointed head and hook head, it is convenient to test different types of products. It is equipped with a storage bag and can be charged via a data cable
9.1Excellent
View offer on:
Show more
5
UNI-TUNI-T UT116C Digital Smart SMD Tester Intelligent Diode Continuity Resistor Capacitor LED Battery Test Mini Multi Tester, 6000 Counts Auto Ranging, Resistance Capacitance DC Voltage
Main highlights- What you get: 1 x UT116C SMD tester (with cover), 1 x test leads (pair), 2 x extra tips (attached on cover), 1 x paper manual, 1 x packaging box, 1 x eManual
- Visible at all angles. Rotatable with LCD screen. Zener diode polarity test. Provide a Excellent solution to classification and detection of discrete chip components, debugging, maintenance of complex electronic systems
- UNI-T UT116C SMD tester tweezers. 6000 counts. Auto ranging. Test surface mounted components, diode, LED, continuity, etc. Measures resistance, capacitance (100 mF max), dc voltage (36 V max). Battery measurement (10 mA)
- Easy access to UNI-T 7/24 1 to 1 user support. If you encounter any problems during use, please contact us first (via e-mail) and our customer service team will deal with your problem as soon as it is received
- Compact & Portable. Gold-plated test pins (INPUT/COM terminals). 8 in/204 mm length. Weight 2.8 oz/80 g
- Accurate & Sensitive. Easy thumb control. Wide applications. Versatile for components verification and sorting, production lines, laboratory and service center, in-field repair，battery power test and more
9.0Excellent
View offer on:
Show more
6
WESTOBiGTransistor Tester, WESTOBIG LCR-P1 Transistor Meter Multifunctional Capacitor Tester LCR ESR Tester Diode Triode LCR ESR NPN PNP MOSFET SMD Tester NEC Infrared Decoding Anti-Burn
Main highlights- 【Well-Built Transistor Tester】The LCR-P1 is equipped with 300mAH battery, you could use it both indoor and outdoor; color screen with backlit make data easier for you to read; Test boards are replaceable,making your testing quicker and more convenient.
- 【Testing Range】Resistance:0.010-50MΩ;Capacitance: 25pF~100mF; Inductance:10uH-1000uH; Transistor:10<β<600;Diode:Forward voltage drop<4.5V; Voltage Regulator Diode:0.01-4.5V,0.01-32V;Field-Effect Transistor: JFET,IGBT, MOSFET
- 【Multifunctional Transistor tester】LCR-P1 is able to detect and analyze the performance and characteristics of semiconductor components such as transistors,diodes, triodes, and field-effect transistors (FETs),etc.
- 【Intelligent and Smart】LCR-P1 is able to identify component parameters with one button operation. It is equipped with anti-burn safety protection mechanism. The data could be transferred to PC via usb cable and exported as an Excel file for you to have more in-depth analysis.
- 【 SMD Testing and NEC Infrared Signal Decoding】LCR-P1 is able to measure SMD components and supports NEC infrared signal decoding for remote testng.
8.7Very Good
View offer on:
Show more
7
ZOYILCR Meter Smart SMD Tweezers Component Tester Diode Capacitance Resistance Measurement 9999 Count Portable Tools
Main highlights- 【Wide Measurement Range】 The MD1 supports a broad range of measurements, including capacitance from 1pF to 20mF, resistance from 10mΩ to 10MΩ, and inductance from 1uH to 60H. This versatility makes it suitable for various applications, from simple component checks to complex circuit analysis
- 【Smart SMD Tweezers】Equipped with a high-definition OLED screen, the MD1 provides clear and easy-to-read measurements, even in low light conditions. This advanced display technology ensures that all readings are visible and accurate, making it easier to analyze components
- 【Portable and Durable Design】 The compact and lightweight design of the ZOYI MD1 makes it an ideal portable testing tool. Its gold-plated replaceable tweezer tips and type-C charging lithium polymer battery ensure convenient charging and long-lasting performance, perfect for on-the-go testing
- 【LCR Meter】 The MD1 model features intelligent auto-identification of components, including capacitors, resistors, and diodes. This function simplifies the testing process, allowing users to quickly and efficiently identify and measure various electronic parts without manual mode switching
- 【Component Tester】The ZOYI MD1 LCR Meter Smart SMD Tweezers offers exceptional accuracy in measuring capacitance, resistance, and diodes. With a resolution of 9999 counts, it ensures precise results for professional electronic repairs and testing, enhancing your work efficiency
8.6Very Good
View offer on:
Show more
8
MINIWAREMINIWARE DT71 Tweezer-Style LCR Meter, Digital Tweezer Tester, Electronic Component Analyzer, Tester for SMD/Resistor/Capacitor/Inductance/Voltage/Frequency/Diode, Automatic Component Recognition
Main highlights- WIDE RANGE OF APPLICATION: the DT71 mini tweezer is a tool for multi-functional electronic components tester analyzer, it is widely useful for tests of L (inductance), C (capacitance), R (resistance), D (diode), V (voltage) and F (frequency).
- WAVE GENERATOR: this LCR meter builds-in a micro signal generator which can export Sine Wave, Pulsed Wave, Noise Wave and Customized Wave.
- TOUCH CONTROL AND ROTATORY CONTROLLER: instead of the traditional physical buttons, there is a hidden touch control on top of the controller. Integrated with OLED screen on the controller head, and it is 360° rotatory according the left or right hand operation to prevent the misreading of detected values.
- NOTE: the tweezer does not have ESR test function
- DETACHABLE PARTS AND INTEGRATED BATTERY: this LCR meter can be separated into controller, test arms and tips, which are flexible to be stored and installed; the compact and pocket size make it convenient to take anywhere you go. Build-in large batteries that bring 10 hrs use time continuously.
- CALIBRATION: if the readings results are unstable and/or fluctuating, please ask for the Calibration Excel Sheet via amazon-mail, then update the data sheet to the tweezer with connection to the computer.
- AUTOMATED RECOGNITION: through a simple grasp of component, the tester automatically detects the corresponding measurement and its value. For example, a grasp of component and will display “Voltage 10V”.
8.3Good
View offer on:
Show more
9
ZOYILCR Meter Zoyi MD1 Bridge SMD Test Clip with OLED Display, Auto Identification, 10mΩ-10MΩ Resistance, 1pF-20mF Capacitance, 1uH-60H Inductance, Lithium Battery Powered, Portable for Electronic Repairs
Main highlights- Wide Measurement Range: This LCR meter measures a wide range of electronic components, including resistance (10 mΩ to 10 MΩ), capacitance (1 pF to 20 mF), and inductance (1 µH to 60 H), making it ideal for circuit testing and repairs across various applications.
- Rechargeable Lithium Battery: Equipped with a 400mAh rechargeable lithium battery, this tester offers up to 12 hours of continuous use on a single charge. The USB Type-C charging port ensures quick and convenient recharging.
- OLED Display for Easy Readability: The high-definition OLED display ensures clear and easy-to-read measurements, showing both primary and secondary parameters, so you can easily view data during testing.
- High Precision Measurements: With a precision of up to 0.5%, this meter provides reliable results with selectable test frequencies (100 Hz, 1 kHz, 10 kHz) and voltages (0.3 V, 0.6 V), ensuring accurate measurements every time.
- Data Storage and Export: Automatically saves test records for easy tracking. You can also connect the tester to your PC and transfer all data to Excel for seamless data management and record keeping.
- Compact & Portable Design: This tool is lightweight and portable, making it perfect for professionals and hobbyists who need a convenient, easy-to-carry tester. Its small size allows for comfortable use in tight spaces, making it ideal for on-the-go testing.
- Automatic Component Detection: The tester automatically detects the component type (resistor, capacitor, inductor, diode), making testing quicker and easier while providing precise data for efficient analysis.
8.2Good
View offer on:
Show more
10
ZOYI28% OffLCR Meter - 2024 Professional 10KHz LCR Meter Tweezer with 0.5% Accuracy, Digital Multimeter Tester with OLED Display, Tester for SMD, ESR, Resistor, Capacitor, Inductance, Voltage, Frequency, Diode
Main highlights- Wide Range of Application. ZOYI LCR meter is a tool for multi-functional electronic components tester analyzer, it is widely useful for tests of L (inductance), C (capacitance), R (resistance), D (diode), V (voltage) and F (frequency).
- Tweezer-sized Design. LCR Meter Tweezer redefines portability with its handheld, tweezer-sized design. Equipped with a variety of testing functions, it enables seamless, on-the-go testing, freeing you from the constraints of traditional LCR.
- Larger Measurement Range and Higher Precision. The measurement range includes test frequencies of 100 Hz, 1 kHz, and 10 kHz, along with test voltages of 0.3 V and 0.6 V. LCR Tester also covers a resistance range from 10 mΩ to 10 MΩ, a capacitance range from 1 pF to 20 mF, and an inductance range from 1 µH to 60 H.
- Data Storage and Export. The LCR tester can automatically save the test records. And you could connect the tester to your PC and transfer all the data to PC via EXCEL.
- Automatic Recognition. Designed meticulously to auto-detect and measure electronic component parameters, it offers unparalleled precision, streamlining your workflow.
8.1Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for tester for smd
