Sw X1 3d Printers of 2025
Best Choice1
Clicked 627 times in the last monthANYCUBICAnycubic Kobra S1 Combo 3D Printer, 4 Stunning Multicolor with Anycubic ACE PRO, 600mm/s High Speed and 320℃ Hotend Free-Clog Extruder, Intelligent Drying While Printing, Built-in Camera 250*250*250mm
Why we love it
Effortless multicolor printing.
Fast and precise printing.
Quiet operation with built-in camera.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ANYCUBICAnycubic 3D Printer Kobra S1 Combo, Multi-Color 3D Printer Max 600mm/s High Speed Printing High Precision, Works Right Out of Box Sealed Storage Intelligent Mult-Filament Drying 9.8"x9.8"x9.8"
Why we love it
Prints 12x faster than typical printers.
Remote control via Anycubic App.
Efficient, multi-color printing options.
9.7Exceptional
View offer on:
Show more
3
HICTOPHICTOP Double Sided PEI Sheet 310x310mm Smooth/Textured Magnetic Sheet with Adhesive for CR-10 CR-10S Artillery SW-X1, SW-X2 3D printers
Main highlights- 5.The size of HICTOP PEI sheet is 310x310mm（12.2*12.2inch), it is applicable with CR-10, CR-10S,Tenlog D3 pro,Longer LK1, Artillery SW-X1, SW-X2 and other same sized 3D printers
- 4.Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 3.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- 2.The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed
- 1.The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied
9.5Excellent
View offer on:
Show more
4
DeDericksArtillery Sidewinder X1 Extruder Upgraded Full Metal Hotend Assembly Replacement All Metal Hotend for SW-X1 3D Printers
Main highlights- Flexible Filament Support: Direct drive extruder for smooth printing with more filaments.
- Extruder: Upgraded full metal extruder designed use for artillery sidewinder x1.
- Enhanced Design: All metal hot end, includes a complete hot end with ABL, E-axis board, thermistor, heating rod, heat sink block pre-installed.
- Easy Installation: Replace the extruder in just minutes by removing screws and reconnecting the tape cable.
- Compatible Replacement: Designed specifically for Artillery Sidewinder X1 3D Printer. Printing is more stable and matches more filaments.
9.3Excellent
View offer on:
Show more
5
POLISI3DUpgrade Adjustable X Y axis synchronous Belt Stretch Straighten tensioner Kit v2 Version Compatible with Sidewinder X1 X2 SW-x1 3D Printer (Tensioner)
Why we love it
Sturdy aluminum construction.
Easy to install.
Improves print stability.
9.2Excellent
View offer on:
Show more
6
Jusnboir3D Printer Platform Double Sided Textured PEI Sheet Build Pate Honeycomb-Shaped Spring Steel Flexible Removable 3D Printer Bed for CR-10/10S/Anet A8/E12/SW-X1/X2 310x310 mm
Main highlights- 【WIDE COMPATIBILITY】The hot bed is compatible with CR-10/10S, A30/A30M/A30T/A30 PRO, A8/E12, X1/X2 3D printer. It is good to print PLA/PLA+/PETG/ABS/TPU/ASA/PVA/PET/PA/PC and more filaments.
- 【HIGH-TEMP RESISTANT】The maximum temperature that the heated bed can withstand is 300°C, but we recommended you print at a tenperature lower than it better for maintain the print bed. The suitable temperature for PAL is 50-70℃,TPU is 50-70℃,PETG is 70-80℃ and ABS is 80-100℃.
- 【EXCELLENT ADHESION】After heating the 3D printer bed has strong adhesion, the model can be firmly attached to the surface. Without glue, the edges of the print will not curl. Even if you are a novice, you can print easily with this 3d printer accessories.
- 【EASY TO REMOVE】Made of spring steel metal, you can bend up the platform and take off your prints after cooling down. It will return its original, so you can reuse it to save your money.
- 【DOUBLE SIDE TEXTURED】Jusnboir 3D printer platform is a double-sided textured PEI sheet build palte. Features honeycomb-shaped surface and exraodinary flatness, make the bottom of your prints more flat and special.
9.1Excellent
View offer on:
Show more
7
BAMBULAB11% OffBambu Lab A1 Mini 3D Printer, Support Multi-Color 3D Printing, Set Up in 20 Mins, High Speed & Precision, Full-Auto Calibration & Active Flow Rate Compensation, ≤48 dB Quiet FDM 3D Printers
Why we love it
Fast and precise 3D printing.
Effortless multi-color printing.
Quiet operation at 48 dB.
9.0Excellent
View offer on:
Show more
8
POLISI3DUpgrade Nano Coated Bimetal Heatbreak Smooth Titanium Copper Throat All Metal Compatible with Artillery Hornet, Sidewinder SW X1 X2 Genius Pro 3D Printer, Chimera + Cyclops Plus Hotend (Heat Break)
Main highlights- This Heatbreak is improved with special Nano Coating called DLC, DLC Nano Coating not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance, with a generally smooth surface,better for filament feeding
- The inner wall of the titanium is very smooth Plus the DLC nano coating so that the filament can pass through very smoothly and stop clogging. And We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- NOTE: We found that many customers do not know how to properly install the nozzle. Remember the core issues in the installation process. Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the melted consumables will leak along the screw holes.
- It is named "Bi-Metal Heatbreak" It has two components -Copper and Titanium TC4 with different thermal conductivity. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction. And Can reach up to 500°C degree
- Compatible with Artillery Hornet, Genius,Genius Pro, Sidewinder SW X1 X2 3D Printer and Original Chimera Chimera+ Cyclops Cyclops Plus Muti color Hotend 3D Printer
8.9Very Good
View offer on:
Show more
9
CrealityCreality K1 SE 3D Printer, 2024 New Version 600mm/s High-Speed Hands-Free Auto Leveling Flagship-Level Direct Extruder Quick-swap Tri-Metal Nozzle K1 Upgrade 3D Printer
Why we love it
Extremely fast printing speed.
Easy to set up and use.
Reliable auto-calibration feature.
8.6Very Good
View offer on:
Show more
10
CrealityCreality K1C 3D Printer, 2024 New Version 600mm/s High-Speed Auto Leveling Clog-Free Robust Direct Extruder K1 SE Upgraded 3D Printer with AI Camera 300°C Printing Support Carbon Fiber Filaments
Why we love it
Exceptional print speed.
Supports carbon fiber filaments.
Reliable clog-free extruder.
8.4Good
View offer on:
Show more
Similar products on Amazon
