10 Best Stepper Motor Red Heatsink In The Us - Black Friday 2024
Best Choice1
Kiro&SeeuKiro&Seeu 5pcs A4988 Stepper Motor Driver pololu StepStick Module Board Red with Aluminum Heat Sink Compatible with Ramps 1.4 3D Printer Reprap, CNC Machine or Robotics
Main highlights- Thermal protection, over-current protection, ground fault protection
- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
- A4988 driver board widely used in 3D printers and small CNC machines
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
uxcelluxcell Electronic Radiators Heatsink for Stepper Motor,3D Printer 40x40x11mm Red 10pcs
Main highlights- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color：Red.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- [FEATURE] With horizontal and vertical cooling slots.It only take seconds to install, easy to install.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
9.5Excellent
View offer on:
Show more
3
uxcelluxcell Electronic Radiators Heatsink for Stepper Motor,3D Printer 40x40x11mm Red 4pcs
Main highlights- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color：Red.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- [FEATURE] With horizontal and vertical cooling slots.It only take seconds to install, easy to install.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
9.3Excellent
View offer on:
Show more
4
uxcelluxcell Heatsink with Hole for Stepper Motor,3D Printer 40x40x11mm Black 4pcs
Main highlights- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color：Black.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- [FEATURE] With horizontal and vertical cooling slots.It only take seconds to install, easy to install.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
9.1Excellent
View offer on:
Show more
5
My Pet Elephant5pcs A4988 Stepper Motor Driver pololu StepStick Module Board Red with Aluminum Heat Sink Compatible with ramps 1.4 3D Printer Reprap, CNC Machine or Robotics
Main highlights- widely used in 3D printers and small CNC machines
- Thermal protection,under-voltage lockout,and crossover-current protection,ground fault protection
- Simple step and direction control interface.Five different step resolutions: full-step, half-step, quarter-step,eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Adjustable current control lets you set the maximum current output with a potentiometer
9.0Excellent
View offer on:
Show more
6
LIONX5pcs A4988 - Stepper Motor Driver Module Board Red with Aluminum Heat Sink Compatible with ramps 1.4 3D Printer Reprap, CNC Machine or Robotics - LIONX
Main highlights- Wide compatibility with 3D printers, small CNC machines, and robotics
- Thermal protection, under-voltage lockout, and crossover-current protection for enhanced safety
- Intelligent chopping control for optimal current decay mode selection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control for precise motor performance
8.7Very Good
View offer on:
Show more
7
uxcelluxcell Heatsink with Hole for Stepper Motor,3D Printer 40x40x11mm Golden 4pcs
Main highlights- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color：Gold Tone.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- [FEATURE] With smooth surface.It only take seconds to install, easy to install.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
8.5Good
View offer on:
Show more
8
HiLetgoHiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Main highlights- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and ± 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
8.3Good
View offer on:
Show more
9
FYSETCUpgrade Stepper Motor Driver Heatsink, FYSETC 10pcs 3D Printer Parts Anodized Aluminum Heatsink 3D Printer Cooler for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver Module, Blue
Main highlights- Ｍaterial: Adopting special design and Anodized aluminium material to achieve faster heat dissipation. The fins increase the area of board and improve the cooling effect.
- Size(LWH): Approx.10 x 10 x13 mm/ 0.39" x 0.39" x 0.51".
- Quality: High quality and durable with long service life. These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance!.
- Package includes: 10 x Stepper Driver Heatsink with Back Glue, easy to install.
- Application：Excellent 3D Printer heat sinks with back adhesive: Work well for 3D Printer Reprap MKS Gel stepper motor driver and other motherboard.
8.1Good
View offer on:
Show more
10
Hot Racing22% OffHot Racing SXTF030H02 Red 9 Fin 030 Motor heat sink Scx 24
Main highlights- Secure fit: Designed to slide on tightly onto the motor, ensuring a snug and secure connection.
- Protect your investment: The added durability of this heat sink helps protect your valuable motor, preserving its lifespan and performance.
- Easy installation: Simply take off all motor stickers and easily slide the heat sink onto the motor from the shaft end.
- Dimensional specifications: With a width of 16mm, this heat sink is compatible with a wide range of motors and provides optimal heat dissipation.
- Added durability: Constructed with red anodized aluminum, this heat sink provides enhanced strength and protection for your motor.
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for stepper motor red heatsink
