10 Best Spi Iic I2c Adapter In The Us - Black Friday 2024
ViewTool Ginkgo USB to I2C/IIC/SPI Adapter Converter Support Windows/Linux/MAC/Android/Raspberry Pi Compatible with UART/ADC/DAC/GPIO
Main highlights- Support Linux, MAC OS, Windows
- Support I2C or SPI Host/Master mode and Slave mode
- Support Android, Raspberry Pi
- Power management chips with PMBus/SMBus interface control
- I2C and SPI device or chip control and debugging
- Curious about how we select the top products for you? Explore How It Works
ViewTool Ginkgo USB to I2C/IIC Adapter Converter Support Windows/Linux/MAC/Android/Raspberry Pi Compatible with CAN/SPI/UART/ADC/DAC/GPIO
Main highlights- Support Windows, Linux, MAC OS
- Support I2C Host/Master mode and Slave mode
- Support Android, Raspberry Pi
- Power management chips with PMBus/SMBus interface control
- I2C device or chip control and debugging
Ardest 1602 LCD 2004 20x4 i2c LCD Display Adapter IIC//TWI/SPI/I2C Serial Interface Module Shield for Arduino UNO R3 MEGA2560 (2 Pcs
Main highlights- This little I2C interface module works great and only two signal connections are required plus one each for power and ground.Good circuits to reduce the number of connections between your MCU and the lcd
- If you already have a bunch of the 1602s but they use up a ridiculous number of pins on the Arduino, this LCD module really make interfacing to LCD text displays easy with an arduino. It saves from having to wire up and uses many gpio pins
- Handy device for I2C interfacing.If you have some 1602/2004 displays or similar and you don't want to have to use 6 to 12 pins on your Arduino or Raspberry Pi just to drive the display then these are just the ticket
- Compatible for 1602 lcd. Works fine with the 2004 LCD display as well. The I2C module can drive 2 and 4 line lcd displays for Arduino
- An excellent improvement and conversion for older LCDs, and saves a lot of pins on the Arduino.The I2C interface is a huge improvement, freeing up a lot of pins on the Arduino for additional functionality and including the contrast control and backlight enable/disable
WSDMAVIS 1Pcs CH341A USB to I2C IIC SPI ISP UART TTL Serial Adapter EPP/MEM Parallel Converter Module
Main highlights- Two parallel port interface way: EPP mode and MEM way; USB to parallel port can be used for simple digital I / O control;Support a variety of serial communication mode, UART, I2C, SPI, etc.;Support 2-wire and 4-wire synchronous serial interface, I2C support 4 kinds of transmission speed;Perfectly support STC MCU program download and debug, STC official recommended program.
- Support the outwards output voltage, optional 3.3V/ 5V or no output;Support working status indication;Dual interface output;Hardware full-duplex serial port, built-in transceiver buffer area, support the communication baud rate 50bps ~ 2Mbps;Support WINDOWS 98/ME/2000/XP/server 2003/VISTA/server 2008/WIN 7/64/32-bit.
- Support 3.3V and 5V TTL target system, the serial application is fully compatible with the computer under the *Windows operating system, without need for modification;Support 5, 6, 7 or 8 data bits, to support odd parity, even parity, blank signs and no parity;Support the serial port to send control signal and MODEM liaison signal of transmission rate and serial receiver ready signal .
- Full-speed USB device interface, compatible with USB V2.0, Standard USB-A male design;Direct power supply from USB connectin to PC.Analogue standard serial port, for upgrading original serial peripherals, or increased additional serial port via USB.
- Application:Simulation standard serial ports, for upgrading original serial peripherals, or increased via USB;Need I2C, SPI, UART, TTL serial port and other occasions;Electronic engineers debugging Downloads;Debugging of a variety of hardware systems, software systems, ;Serial ports flash.
ECSiNG 5pcs IIC I2C Serial Adapter Interface Board Module Port for LCD1602 Display 5V 2mA 2004 LCD Display Module Reflective Adapter
Main highlights- This handy adapter module has fast transmission and can convert the parallel data transmission of an LCD display into a serial I2C signal.
- The adapter requires only 4 ports instead of 16 and has an additional 6 selectable IIC addresses, allowing simultaneous operation of up to 6 displays.
- Supply voltage: 5V, Nominal Current Rating: 2 mA, Size: 41.4mm*19mm* 15.8mm (L*W*H), compatible with 1602 2004 LCD.
- Product include a total of 5pcs interface adapter, which can completely meet your daily use needs and replacement.
- IIC/I2C/TWI/SPI Serial Interface. with this I2C interface module, you will be able to realize data display with only 2 wires.
All in 1 USB for ISP Serial Adapter Converters SPI/I2C/IIC/UART/TTL
Main highlights- Support the serial port to send control signal and MODEM liaison signal of transmission rate and serial receiver ready signal
- Support 3.3V and 5V TTL target system, the serial application is fully compatible with the computer under the Windows operating system, without need for modification
- Direct power supply from USB connectin to PC.Analogue standard serial port, for upgrading original serial peripherals, or increased additional serial port via USB
- ALL IN 1 USB to SPI/I2C/IIC/UART/TTL/ISP serial Adapter
USB to UART/I2C/SPI/JTAG Converter, USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG,Compatible with Win7/8/8.1/10/11, Linux, Androidetc.
Main highlights- 【Supports Multiple Interfaces】 Easy to control and debug various interface devices via PC, Supports USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG
- 【Multiple Systems Support】Supports Win7/8/8.1/10/11, Linux, etc. 【Application Environments】Suitable for college students, technical engineers, electronic enthusiasts, or DIY makers for learning and debugging.
- Supports 2-ch high-speed UART interfaces, up to 9Mbps baud rate, with CTS and RTS hardware automatic flow control. Supports 1-ch I2C interface, for easy operating EEPROM through the host computer or programming I2C devices such as OLED and sensor.
- Supports 1-ch SPI interface, with 2x chip select signal pins, capable of controlling 2-ch SPI slave devices at different times. Supports 1-ch JTAG interface, can be used with OpenOCD for debugging and testing. (Due to the limited testing of chips and software functions, users need to evaluate and test this function on their own)
- Multiple Protection Circuits】 Onboard resettable fuse and ESD protection circuit, provides over-current/over-voltage proof, safe and stable communication. Onboard 3.3V and 5V level conversion circuit for switching the operating level of the communication interface, better compatibility.
DEVMO 2PCS I2C/IIC/TWI Serial Interface Board Module Compatible with Ar-duino LCD 1602 US Ship N50
Main highlights- ★You will be able to transfer data using only 2 wires
- ★With this I2C interface module, you can free up the ports allowing you connect more devices
- ★Package Includes: 2PCS I2C/IIC/TWI Serial Interface Board Module
- ★Compatible for 1602 LCD 2004 LCD
- ★Another great IIC/I2C/TWI/SPI serial interface
Black Friday Sale
Deal ends in
HrsMinSec