10 Best Speed Control for Esc In The Us - Black Friday 2024
- Curious about how we select the top products for you? Explore How It Works
Readytosky 2-4S 40A Brushless ESC Electronic Speed Controller 5V/3A BEC for F450 450mm S500 ZD550 RC Helicopter Quadcopter(4PCS)
Main highlights- ★★★Note: This ESC is not able to flash the firmware.
- ★Use for F450 450mm S500 ZD550 RC Helicopter Quadcopter.
- ★The applicable number of battery cells :2-4S.
- ★Highly intelligent, adaptive ability, extremely easy to use.
- ★40A 2-4S Brushless ESC,BEC output: 5V 3A .
Flycolor 40A ESC 2-4S Electric Speed Controller 5v 3A BEC with XT60 & 3.5mm Bullet Plugs for RC Drone Airplane Brushless Motors
Main highlights- Users can set functions as their demand, Judge the working condition via alarm. Cycle programming menu which easy to operate .
- Unique circuit design,strong anti-interference.small size and light weight. Low-voltage protection threshold value can be set.
- Multiple Protection Features: Abnormal startup protection, over-heat protection, throttle signal loss protection, low-voltage cut-off protection etc.Low-voltage protection threshold value can be set.
- High Power Safety Performance: wherever the throttle lever is,the motor will not start immediately. Start mode can be set, throttle response is fast and speed control is linear smooth.
- Function: Using C8051F850 MCU ,pipelined 8-bit C8051 core . FlyDragon Lite series, Built-in BEC,high output power,less power loss.
4Pcs 20A ESC Brushless Electronic Speed Controller DSHOT BLHeli_S 2-4S Lipo for FPV QAV Drone Multirotor Quadcopter
Main highlights- With BLHeli_S firmware, easy to upgrade or flash via the esc signal cable;The throttle signal cable is twisted pair, which effectively reduces the crosstalk caused by signal transmission..
- The throttle range can be set to be compatible with different receivers, with a smooth and delicate speed control feel.
- The applicable number of battery cells :2-4S;The original components are used to ensure the high-quality current capability of the ESC..
- It is optimized for multi-axis and supports fixed-wing and helicopters well.
- 20A ESC Brushless DSHOT BLHeli_S 2-4S Lipos Electronic Speed Controller for FPV QAV Drone Multirotor Quadcopter
GoolRC AX-D60A 60A Waterproof Brushed ESC Electronic Speed Controller for 1/10 RC Car Off-Road Truck RC Boat 2S LiPo 6-8S NiMh Battery
Main highlights- The strong resistant current capability, excellent heat dissipation.
- Suit for 1/10 RC Car Off-road Truck and RC Boat.
- Multiple protection features: low voltage cut-off protection/over-heat protection/throttle signal loss protection.
- Easily programmed and compatible with pocket-sized program card.
- Compatible with brushed motor.
FPVDrone Bidirectional 5A ESC Brushed Speed Controller Dual Way ESC 2S-3S Lipo for RC Model Boat/Tank 130 180 Brushed Motor Spare Parts(4PCS)
Main highlights- The strong resistant current capability, excellent heat dissipation.
- Suitable for 1/35 RC model cars,tanks,4WD RC cars.
- Small size with built-in capacitor module.
- Multiple protections: Throttle signal loss protection/Out of control.
- Dual-way 5A Brushed ESC support 2S-3S Lipo.
Readytosky 30A ESC 2-6S OPTO Brushless Electronic Speed Controller for F450 S500 ZD550 RC Helicopter Quadcopter(4PCS)
Main highlights- ★Specifically optimized firmware ESC, the ESC has a very good compatibility.
- ★Highly intelligent, adaptive ability, extremely easy to use;
- ★Continuous Current: 30A Weight: 28.5g.
- ★30A OPTO 2-6S Brushless electronic speed controller.
Radiolink CL9030 90A (2-4S) Brushed ESC Waterproof Built-in 5A BEC Selectable 5.5V/7.5V Electronic Speed Controller for RC Crawlers Tanks Cars Boats (XT60 Plug)
Main highlights- Wide Voltage Compatibility: Input voltage range 6-16.8V(for NI-MH, Ni-Cd, or lead-acid battery), 6-18V(for 2S-4S, Lithium Battery).
- Waterproof & Dust-rejected & Multiple Protections: abnormal voltage input & low voltage cut-off protection for battery/Over-heating Protection/Over-input voltage Protection.
- NMOS H-Bridge Drive Design, Low Self-heating: The CL9030 ESC uses the industry's innovative NMOS H-Bridge drive design, the internal resistance is much lower than that of the PMOS design commonly used in other ESCs, and massively reduces the heat during operation. CL9030 operates with minimal heat, eliminating the need for water cooling even in enclosed boat applications. Avoiding water-cooled components, not only saves space in the boat body (no water pumps or pipes required) but also avoids the risk of short circuits due to water-cooled failures.
- High Performance: With a 32-bit high-speed chip, high-frequency switch-mode chip MP9943 from MPS, and over 20 years of circuit design experience, CL9030 makes the throttle sensitivity up to 2000. Linear smooth control both forward and reverse is perfect for RC crawlers, drifting cars, and monster trucks.
- Built-in Switchable BEC: 90A@18V constant output current, with built-in BEC output voltage selectable 5A@5.5V / 5A@7.5V. Whether it is a 2S or 4S battery, it always maintains stable voltage output even in the case of instantaneous high current. CL9030 can easily drive all kinds of standard and high-voltage servos and other external electrical equipment.
- 4 Working Modes: Boat Mode, Training Mode, Racing Mode, and Crawler Mode. It can be set up easily through the jumper cap, no need program card. Works with most of RC radios and receivers, like RC6GS V3/RC4GS V3/RC8X/Dumborc X6/X4/DDF/Flysky GT5/Noble 4 and more.
GOUPRC 60A Brushed ESC Electronic Speed Controller Waterproof for 1/10 RC Car RCBoat for use with 540/550 Motors (Black)
Main highlights- Waterproof and dustproof brushed esc
- Overheat protection, low battery voltage cutoff, and throttle automatic detection
- Free adapter to use T-plug/XT60 plugs
- Eight Low internal resistance, high current mos tubes rc esc
- 8 Low internal resistant, high current MOS transistors applied
GoolRC 60A 2S-3S Brushed ESC Waterproof Electronic Speed Controller Replacement for 1/10 Tamiya Traxxas Redcat HSP HPI RC Car
Main highlights- The ESC has automatic throttle range calibration, easy to use.
- Replacement for 1/10 Tamiya Traxxas Redcat HSP HPI short course, monster truck, off-road buggy, rock crawler RC car.
- Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
- High quality components, big current endurance; Great built-in SBEC output capacity.
- Excellent start-up, acceleration and linearity features.
Black Friday Sale
Deal ends in
HrsMinSec