10 Best Small Servo Motor In The Us - Black Friday 2024
Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear Servo for Arduino Project, Small Servo for Rc Car Airplane Robot 10 Pack
Main highlights- SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
- Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally.
- Mini Servo - small servo motor compatible with JR and Futaba interface. Micro servo running speed (at no load) : 0.09 sec/60° (4.8V) 0.08 sec/60°(6V). Running angle: 180 degree.
- Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V-6.0V.
- Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
- Curious about how we select the top products for you? Explore How It Works
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
Main highlights- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Please Note: The starting current of the motor should be greater than 1A
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree
- Amplifier Type: Analog controller. Operating Voltage: 4.8V~6.0V
Miuzei MG90S 9G Micro Servo Motor Metal Geared Motor Kit for RC Car Robot Helicopter, Mini Servos for Arduino Project (4)
Main highlights- Wide Applications: Tiny and lightweight with high output, this mini small micro servo is perfect for RC airplanes, helicopters, quadcopters,boat, car, electronics DIY or robots.
- Stall Torque: 2.0kg/cm(4.8V). Operating Speed: 0.11 seconds/60 degrees (4.8V).
- Operating Voltage 4.8V - 6V. Operating Temperature: 0°C to +55°C. Dead Zone Width:5 Microseconds
- Metal Gear: Aluminum metal teeth, coreless motor, double ball bearin. Metal Gear with less noise for added strength and durability.
- MG90S Micro Servo Motor, updated SG90 serve motor.
Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for 1/6, 1/8, 1/10, 1/12 R/C Model DIY Car Robot, DS3218, Control Angle 270°
Main highlights- Large Torque: it reacts quickly and the maximum torque is up to 22.8kg·cm (316.63oz·in) at 6.8V.
- High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection
- Control System: change of pulse width. Pulse range 500usec - 2500usec for 0° - 270° (90°--1166usec, 180°--1833usec).
- Application Fields: suitable for airboats, 1:8 / 1:10 rc cars, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
- 270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter
Main highlights- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees.
- This servo offers a full range of 180° with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Good performance digital standard Deegoo-FPV servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
Beffkkip MG90S 9g Servo Motor Micro Metal Gear for Robot Car Plane RC Helicopter Arduino
Main highlights- Structural Material: Aluminum metal teeth, coreless motor, double ball bearin
- Stall Torque: 2.0kg/cm(4.8V)
- Operating Speed: 0.11 seconds / 60 degrees (4.8V)
- Metal Gear with less noise
- Beffkkip MG90S Micro Servo Motor, updated SG90 serve motor.
12PCS SG90 Micro Servo Motor, Dorhea Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control
Main highlights- The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats.
- It is tiny and lightweight with high output power.
- Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.
- 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
25KG High Torque RC Servo, Miuzei Waterproof Servo Motor Compatible with 1/6, 1/8, 1/10, 1/12 RC Car, Full Metal Gear Steering Servo with 25T Servo Horn(270°)
Main highlights- Servo Motors: servo motor high torque matal gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servos, two functions are added, servos for rc cars can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection.
- Rc Servo: 25kg digital servo have high torque, high speed, fast response, stable performance, strong anti-interference ability, and fast heat dissipation.
- High Torque Servo Motor:it reacts quickly and the maximum torque is up to 27.5kg,cm At 8.4V. Waterproof servo, Full metal gear servo rc car servo, quiet servo motor, light weight, Running 270°degree servo.
- Application Fields: servo rc suitable for airboats, rc car, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
- 25kg Servo: rc servo high torque built-in brush motor and stable motherboard, precise angle without deviation.
10 Pcs SG90 9g Micro Servo Mini Servo Motor for RC Car RC Plane RC Helicopter RC Boat Servo Motors Control Arm Remote Control Helicopter and Toy RC Servo 9 gram for Mini Controller for Arduino Kit
Main highlights- Versatile Applications RC Servos - Ideal for enhancing precision and control in rc airplane kit, rc boat kit, rc car motor or any other arduino kits and arduino projects. This 9g servo meets the needs of hobbyists and engineers alike, providing reliable performance across various arduino projects.
- Ultra-Precise SG90 9g Servo Motor - Designed for exceptional steering and control, this low-profile servo is ideal for RC planes, arduino robot kit, arduino car, science kit, mini airplanes, helicopter model kit, mini robots, mini rc plane, rc robot, rc motor, diy rc car kit, mini helicopter, rc plane kit, mini rc helicopter, rc airplane kit, rc boat kit, rc car motor or any other arduino kits and arduino projects. Perfect for robotic hobbyists, it integrates seamlessly with Arduino, Raspberry Pi, and other popular electronics platforms, offering reliable performance in all your projects.
- SG90 Micro Servo Motor with Wide Compatibility And Easy Integration - Compatible with JR, Raspberry Pi, Arduino and Futaba interfaces, this digital servo motor fits seamlessly into your projects, from linear servo motors to spectrum-engineered systems for RC robot, helicopter toy and other science kit.
- Reliable Power And Durability of 9g Mini Servo Controller - Operating voltage range of 4.8V to 6.0V with a robust design capable of handling starting currents above 1A; ensuring your arduino servo motor can handle high-intensity tasks without compromise.
- Mini RC Servo Controller - High Torque Servo And Stability - Delivers a stall torque of 17.5oz/in (1kg/cm) with a dead band width of 7usec, ensuring reliable performance even in demanding applications like robotic arms, robot, rc helicopter for adults, toy car, micro rc toy, arduino motor and other continuous rotating motor.
- Fast And Responsive Running Speed of SG90 Servo - Achieve rapid movements with a no-load speed of 0.09 sec/60° at 4.8V and 0.08 sec/60° at 6V; making it ideal for arduino robot kit, arduino car, mini airplanes, helicopter model kit, mini robots, mini rc plane, rc robot, rc motor, diy rc car kit, mini helicopter and many more.
Black Friday Sale
Deal ends in
HrsMinSec