Sk6812 Ws2801 Ws2811 Ws2812bs of 2025
Best Choice1
ALITOVEALITOVE WS2812B WS2811 DMX to SPI Controller Decoder, W/ 99 Color Modes, 5 Channel DMX 512 RGB WW Decoder Controller for WS2815 SK6812 WS2801 WS2813 LP6803 1903 RGBWW LED Pixels Light Strip DC5V~24V
Main highlights- When no DMX signal input, it can work as SPI controller and control up to 1024 pixels. 99 kinds of built-in dynamic color modes are available, such as flash, glow, fading, smooth, chasing, stream, spreading, strobe, which are vivid and beautiful. Speed is adjustable.
- When DMX signal input, it can identify DMX512 automatically and work as DMX decoder with standard DMX512 compliant interface. Decoding channels are adjustable.
- The DMX controllers / decoders can be cascaded together and work synchronously. DC 5V~24V wide working voltage; LCD display; Save user setting when power off. Reverse connection protection; hot swap protection.
- Support almost all the one-wire or two-wire LED driver ICs, such as WS2811,WS2812B, WS2815, WS2801, SK6812, SK6812-RGBW, WS2813, LPD6803, LPD8806, APA102, TM1913, UCS1903, SM16703, DMX512, etc.
- Compared with other DMX decoders which can only decode one kind of LED, ALITOVE DMX decoder can decode both smart addressable pixel LED and RGBWW 5 channels LED.
9.9Exceptional
View offer on:
Show more
How do we rank?
Using our advanced technology, we scan thousands of products and stores, analyzing reviews, ratings, and trends to find what matters most to users like you.Our team then reviews the data and real user feedback, combining AI and human insights to bring you real-time, top-rated recommendations to guide your decisions with clarity and confidence.
Value for Money2
BTF-LIGHTINGBTF-LIGHTING Addressable LED Strip TTL Signal Amplifier Super-Far-Distance 600FT Work for WS2812B WS2811 SK6812 WS2813 WS2815 SK9822 WS2801 etc Dream Color Light and Programmable LED Matrix IP67
Main highlights- The isolation performance is good, and the electrical isolation between input and output is realized completely.The signal is transmitted in one direction, and the output signal has no feedback to the input.The optical signal is stable and reliable without electromagnetic interference
- The ability of resisting common mode interference is strong, and the interference can be suppressed.The optocoupler has fast response speed and high transmission efficiency.
- Super-Far-Distance .The transmission distance can be 200 meters 640ft,Solves the problem of long distance signal transmission.Usually, the signal wires exceeds 3 meters(10ft),the signal starts to become unstable.
- Note: It is not a controller . It works with controller together. Can not support 4 pin or 5 pin RGB/RGBW no IC chip 5050 LED strip . This TTL signal amplifier is compatible with all kinds Addressable LED strip. Including FCOB RGB WS2811 IC, WS2811,WS2812B,SK6812,1903,6803,WS2813,WS2815,WS2801,APA102C,SK9822 etc
- Can be used with various controllers. SP110E,SP105E,SP106E,SP107E,SP108E,SP501E,SP601E,SP608E,X2 music controller,14 keys remote controller ,K-1000C,T-1000S,CSY07,CSY08 etc all the Addressable LED strip controller.Also can work with SPI Signal Aplifier SP901E.
9.6Exceptional
View offer on:
Show more
3
BTF-LIGHTINGBTF-LIGHTING Wireless Bluetooth Controller SP105E iOS/Android APP for WS2811 WS2812B WS2815 WS2813 WS2801 SK6812 WS2815 SK9822 APA102 etc LED Strip Pixel Fairy String Module Panel Light
Main highlights- Warranty . If it does't work , please contact us , we will help you to solve the problem.May be you will connect the wrong wire or the wire is loose .
- WIDE COMPATIBILITY. Support almost Smart LED IC ,one-wire or two-wire LED driver IC, such as FCOB RGB WS2811 IC, WS2811 SMD,WS2812B,WS2813,WS2814,WS2815, WS2801, SK6812, SK6812-RGBW, LPD6803, LPD8806, APA102, APA105, TM1804, TM1814, TM1914, TM1913, P9813, INK1003, UCS1903, DMX512
- Safe. DC5V DC12V DC24V wide working voltage, preventing reverse connection of power supply, protecting LED light and controller very well. DC5V WS2812B LED strip, please only use DC5V power adapter. 5.5mmx2.1mm DC power jack
- Rich color modes. Come with 200 kinds of color change modes, auto mode and static color mode, which are vivid and beautiful. Save user setting automatically when power off. Brightness is adjustable.
- It is not recommended to light up the full brightness white light for a long time, because the main function of the addressable RGB IC light strip or fairy string is chasing rainbow effects .
- Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, Bluetooth is disconnected . Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED.If you don't know which power supply can be used for your LED project, you can email us
- Convenient. IOS and Android APP control via Bluetooth 4.0 or later version. Long control distance, convenient to use. Support IOS 8.0 and Android 4.4 or later version. Your smart Phone should support Bluetooth 4.0 or later version.
- Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the APP to calibrate the colors to make them consistent.6 color sequences, RGB, RBG, BRG, BGR, GRB, GBR, select one of them for calibration
9.3Excellent
View offer on:
Show more
4
BTF-LIGHTINGBTF-LIGHTING SP901E WS2812B WS2811 SPI Signal Amplifier Repeater for WS2813 SK6812 WS2815 WS2801 SK9822 etc All The RGB Addressable Strip Light and Dream Color Programmable LED Matrix Panel
Main highlights- You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811 / FCOB RGB WS2811 IC ,DC12V WS2815, DC12V 1903, DC12V 6803 Or DC24V FCOB RGB WS2811 IC at the same time via this singal amplifier since they have the same singal.
- Note: It is not a controller . It works with controller together. Can not support 4 pin or 5 pin RGB/RGBW no IC chip 5050 LED strip . This SPI signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.
- Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller.
- It can output 8 channels for addressable LED strip with single data wire, such as FCOB RGB WS2811 IC , WS2812B, WS2811, SK6812RGB, SK6812-RGBW,SM16703, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as WS2813, WS2815
- DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.
9.2Excellent
View offer on:
Show more
5
SUPERNIGHTSUPERNIGHT LED Pixel Strip Amplifier Signal Data SPI Repeater for WS2801 WS2811 WS2812B WS2813 WS2815 SK6812 SK9822 Addressable RGB Light Strip Dream Color Programmable Rope Lighting 5v-24v SP901E
Main highlights- 【SPI Signal Amplifier】This data repeater signal amplifier is compatible with all kinds of 5V-TTL signals. You can use only one controller to control 4~8 channels of signals simultaneously.
- 【For Dream Color Lighting Projects】Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium . It can work with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller.
- 【DC 5V~24V Working Voltage】Please make sure the input power for the led pixel amplifier is as same as the but it work voltage of your led lights. If you want to simultaneously control DC12V WS2811, DC12V WS2815, DC12V 1903, DC12V 6803 via this signal amplifier, the input power voltage must be 12V.
- 【Control Different LEDs】 You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time. (Please make sure all power voltage is 5V)
- 【Compatible LED- Model】 Great for addressable LED strips with single data wire, such as WS2812B, WS2811,WS2813, WS2815, SK6812, SK6812-RGBW, SM16703 and more.
9.0Excellent
View offer on:
Show more
6
RGBZONERGBZONE SP105E Bluetooth LED Controller, Smart APP Control, Music Sync for WS2811 WS2812B WS2815 WS2813 WS2801 SK6812 WS2815 SK9822 APA102 etc LED Strip Pixel Fairy String Module Panel Light
Main highlights- Ws2811 controller does not have the function to regulate the output voltage at the VCC, which means the working voltage of the power supply is same as the LED lights. For example, you want to control WS2812b DC5V led strip, then the power supply should be DC5V not higher than that, otherwise; the whole led strip will burn out at once. This is not the cause from the SP105E controller.
- This LED controller supports to control 2048 pixels (but recommend to control 1200pixels, which is more efficiency).
- SP105E cannot work with RGB RGBW led strip lights without IC chip. Just supports to control led lighting with IC chips like Ws2812b, Ws2811, Ws2815, WS2813, WS2801, SK9822, SK6812, APA102 etc.
- Built-in 200 color changing effects, auto and static color mode for choose. It’s brightness and speed can adjusted. Save user setting automatically when power off.
- Bluetooth APP Control: Supports to control by APP on the phone without distance limitation. You can Search “Magic-LED” on App Store, Google Play or scan the QR code on SP105E box to download and install the App. Apply to Android 4.4 / ISO 10.0 / Bluetooth 4.0 or later edition.
8.9Very Good
View offer on:
Show more
7
ALITOVEALITOVE WS2812B WS2811 WS2801 LED WiFi Controller, iOS Android App Wireless Remote Control DC 5V~24V SP108E for SK6812 SK6812-RGBW WS2812 WS2813 WS2815 AL2815 Digital Addressable RGB LED Pixels Strip
Main highlights- 【Wide Compatibility】 Support almost all the one-wire or two-wire LED driver ICs, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813, LPD6803, LPD8806, APA102, TM1913, UCS1903, SM16703, DMX512.
- 【WiFi Remote Control.】Long distance IOS and Android App remote control via WiFi, IOS 10.0 or Android 4.4 or later edition required. Support routing connection mode (AP) and LAN connection mode (STA). Can't support 5Ghz WIFI
- 【User-friendly design】 Support setting pixels number and segments number, control up to 2048 pixels in total. Save user setting when power off. DC 5V~24V wide working voltage; reverse connection protection; hot swap protection
- 【Rich Color Modes】 180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness and speed are adjustable.
- 【Capture image’s color you like】The WiFi controller features creative from-image-to-effect function. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room.
8.8Very Good
View offer on:
Show more
8
AlinanAlinan 2pcs SP901E LED Controller SP901E LED Pixel WS2812B WS2811 SPI Signal Amplifier Repeater for WS2813 SK6812 WS2815 WS2801 SK9822 etc
Main highlights- ★Use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time. (Noe: make sure all power voltage is 5V)
- ★This data repeater signal amplifier is compatible with all kinds of 5V-TTL signals. You can use only one controller to control 4~8 channels of signals simultaneously.
- ★Suit for addressable LED strips with single data wire, such as WS2812B, WS2811,WS2813, WS2815, SK6812, SK6812-RGBW, SM16703 and more.
- ★Make sure the input power for the led pixel amplifier is as same as the but it work voltage of your led lights. If you want to simultaneously control DC12V WS2811, DC12V WS2815, DC12V 1903, DC12V 6803 via this signal amplifier, the input power voltage must be 12V.
- ★It can work with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller. Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium.
8.7Very Good
View offer on:
Show more
9
ACEIRMCACEIRMC 2pcs SP901E LED Pixel WS2812B WS2811 SPI Signal Amplifier Repeater for WS2813 SK6812 WS2815 WS2801 SK9822 etc All The RGB Addressable LED Strip and Dream Color Programmable LED Matrix Panel
Main highlights- Use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811 / FCOB RGB WS2811 IC ,DC12V WS2815, DC12V 1903, DC12V 6803 Or DC24V FCOB RGB WS2811 IC at the same time via this singal amplifier since they have the same singal.
- This data repeater signal amplifier is compatible with all kinds of 5V-TTL signals. You can use only one controller to control 4~8 channels of signals simultaneously.
- Suit for addressable LED strips with single data wire, such as WS2812B, WS2811,WS2813, WS2815, SK6812, SK6812-RGBW, SM16703 and more.
- Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller.
- DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage.
8.6Very Good
View offer on:
Show more
10
BTF-LIGHTINGBTF-LIGHTING SP630E Bluetooth LED Controller Support PWM Monochrome CCT RGB RGBW RGBCCT Or SPI TTL IC Chip LED Strip WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 etc DC5V DC12V DC24V
Main highlights- Timing function.You can set up to 5 timers.With memory function in case of power-down.
- The SP630E controller's SPI interface supports a maximum of 600 ICs for single-color LED strips, 600 ICs for CCT (dual-color-temperature) LED strips, 600 ICs for RGB LED strips, 450 ICs for RGBW LED strips, and 300 ICs for RGBCCT LED strips, with all values representing the upper control limits under optimal operating conditions.
- Support SPI+PWM LED Strip at the same time.For example you can controller WS2812B IC RGB LED strip + FCOB 3000K single color no IC strip or WS2812B IC RGB LED strip + FCOB CCT no IC strip.
- Support PWM LED Strip. PWM LED strip which has no IC chip,fox example FCOB 5630 5730 5050 2835 3528 2pin(V+ V-) 3pin CCT(V+ CW WW) 4pin RGB(V+ R G B) 5pin RGBW(V+ R G B W) 6pin RGBCCT(V+ R G B CW WW) .Monochrome Light and CCT light have no function of DIY light effect.
- Support Addressable IC Chip LED Strip. SPI TTL IC Chip LED strip. 3pin(V+ Data GND) or 4pin(V+ Data Backup GND). For example WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 IC chip etc single color, CCT, RGB, RGBW, RGBCCT addressable LED strip. Can not support SK9822 WS2801 etc Data+Clock LED strip. Monochrome Light and CCT light have no function of DIY light effect.
- Music lighting effects. 3 kinds of collection methods, mobile phone microphone, player streaming, Built-in high-sensitivity microphone.
- DIY .You can make your own lighting effect for the LED strip.Banlan X APP bluetooth control .Three APP operating interfaces: static effect, dynamic effect and music effect.(Note:Only when the parameter settings of all SP630E are consistent can the APP grouping function be used.)
- DC5V, DC12V or DC24V. 5.5mmx2.1mm DC power jack. Please use DC5V power supply for DC5V LED strip.6A/Channel ,Max 12A.
- Color calibration. When the app color is inconsistent with the color of the LED strip, the color can be calibrated to make it consistent.
8.4Good
View offer on:
Show more
Similar products on Amazon
