10 Best Servo Micro Small In The Us - Black Friday 2024
- Curious about how we select the top products for you? Explore How It Works
YoungRC Micro 3.7g Servo GH-S37D Mini Digital Servo for Control Aeromodelling Aircraft Flight Direction RC Plane Helicopter Boat Car 5pcs
Main highlights- ▲ Use for rc plane, helicopter, boat, car, etc.
- ▲ The 3.7g servo is coreless, gear precision, high torque and low noise.
- ▲ Package Included: 5 pieces 3.7g micro servo.
- ▲ Made of all nylon gear, durable for used,long service time.
- ▲ Connector wire length up to 150mm, convenient to use.
Wishiot 2pcs Tiny 1.5g servo Micro Linear Digital Servo Lightweight Mini Size for Indoor Aircraft Small RC Plane
Main highlights- 【 Any questions? 】Please feel free to ask any questions you may have and will respond within 24 hours
- You will get 2pcs mini servo
- Ultra small size:21.2 x 15 x 6.0mm
- The weight of the mini servo is only 1.5g, can work for small RC plane
- Please note that voltage is 3.7V-6.0V
INJORA 7KG 2065 Digital Servo Waterproof High Voltage Sub-Micro Shift Servo for TRX4 TRX6 SCX10 III 1/10 RC Crawler Car,1PCS
Main highlights- 【Note】If you want to use it in TRX4M, you need to remove/modify part of the stock servo mount. Does not fit the INJORA TRX4 TRX6 25T Adjustable Damping Servo Arm.
- 【New Upgrade】This sub-micro servo is an excellent choice for the diff lock servo in the TRX-4 TRX-6 and a dig and shift servo for SCX10 III.
- 【High waterproofness】IP66 Waterproof design, maintain good water tightness in wet conditions.
- 【Exquisite Workmanship】Stainless steel gears and lower noise provide better stability.
- 【Brand Guarantee】The INJORA 7KG 2065 Digital Micro Servo is an affordable, high-voltage "mighty micro" upgrade. Suit for TRX4 TRX6 SCX10 III 1/10 RC Crawler Car.
2PCS AGFRC Micro 9g RC Servo Motor Kit - Digital 2.8KG Metal Gear Mini Servo for RC Helicopter Airplane Car, Control Angle 180°
Main highlights- Ultra Light 13g, Size 23*12.1*23.8mm
- Stall Torque: 2.2kg.cm @ 4.8V,2.8kg.cm @ 6.0V
- Ideal for robot Plane Helicopter Boat Car
- High precision metal gears Micro Servo
- Genuine AGF Brand package. Any question please contact us at first time
Miuzei 21G Micro Servo Motor Metal Geared Mini Digital Servo Kit with 25T Servo Horn for 1/14 1/16 1/18 RC Car Robot Helicopte (2)
Main highlights- Wide Applications: 21G Mini Digital Servo is suitable for remote control vehicles such as Crawlers, Buggy, RC Car, Boat, RC Aircraft, RC Helicopters, On-Road,Off-Road, etc. Especially this servo is most suitable for micro control fields such as aircraft models, drones, toys, intelligent switches, etc.
- Stall Torque: 4.3kg/cm(6.0V), Operating Speed: 0.08 seconds/60 degrees (6.0V).
- Note: In the frequency range of 500 to 2500us, the maximum controllable angle of the servo can be accurately achieved at 180 degrees, and the servo can achieve a control angle of 90 degrees under the control of a transmitter.
- Metal Gear: 21G Servo Adopt precision copper metal gear can prevent tooth sweeping (firmer than plastic gears), core motor, double ball bearing. Metal Gear with less noise for added strength and durability.
- High Performance: 21G Mini Digital Servo with High Torque can achieve Low Noise, Stability, Small Vibration, Smooth Operation, Excellent Linearity, Precision Control, Fast Response.
Wishiot 2pcs Tiny 1.5g servo Micro Linear Digital Servo Lightweight Mini Size for Indoor Aircraft Small RC Plane with 3CH Digital Multi Servo Tester
Main highlights- You will get 2pcs mini servo and 1pcs servo tester
- Ultra small size of the 1.5g servo:21.2 x 15.0 x 6.0mm
- This tester can test more than 55 grams of servos
- The servo can work for Small RC Plane
- Please feel free to ask any questions you may have and will respond within 24 hours. We will give you a satisfactory solution
Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear Servo for Arduino Project, Small Servo for Rc Car Airplane Robot 10 Pack
Main highlights- SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
- Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally.
- Mini Servo - small servo motor compatible with JR and Futaba interface. Micro servo running speed (at no load) : 0.09 sec/60° (4.8V) 0.08 sec/60°(6V). Running angle: 180 degree.
- Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V-6.0V.
- Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
Main highlights- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Please Note: The starting current of the motor should be greater than 1A
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree
- Amplifier Type: Analog controller. Operating Voltage: 4.8V~6.0V
DSPOWER 2PCS 21G Mini Digital Servo, Steering Gear Full Metal Gear Micro RC Servos Motor Kit with 25T Servo Horn for 1/18 1/16 1/14 RC Car Model Boat Fixed-Wing Helicopter Airplane Robot Toy
Main highlights- 【Widely Use 】:The Mini Digital Servo is suitable for remote control vehicles such as Crawlers, Buggy, RC Car, Boat,RC Aircraft,RC Helicopters, On-Road,Off-Road,RC Drones,Toys,etc.Especially this servo is most suitable for micro control fields such as aircraft models, drones, toys, intelligent switches, etc.
- 【Note】:In the frequency range of 500~2500us, the maximum controllable angle of the servo can be accurately achieved at 180 degrees, and the servo can achieve a control angle of 90 degrees under the control of a transmitter.
- 【High Performance Digital Standard】:The 21G Mini Digital Servo with Extra Large Torque can achieve Low Noise, Good Stability, Small Vibration, Smooth Operation, Excellent Linearity, Precision Control, Fast Response.
- 【Excellent Quality Workmanship】:The 21G Micro Digital Servo made with excellent Plastic Shell material (lightweight and fast heat dissipation) and high-precision Full Metal Gear (more durable and prevent tooth sweeping) with Hard Anodizing, combined with Dual Ball Bearings, has a longer service life.
- 【Electronic Protection】:The DS-S007M 21G Servo will undergo current reduction and power outage treatment when the locked rotor time and current exceed the preset values, preventing blockage and burning. A solid hardware foundation combined with more advanced software allows the servo to provide high torque output while significantly reducing the probability of damage to the servo under high loads.
Black Friday Sale
Deal ends in
HrsMinSec