10 Best Sensor Photoelectric Switch In The Us - Black Friday 2024
Best Choice1
TaissTaiss/1 Pair photoelectric Switch 0-20M Through-Beam Reflection Optical Photoelectric Beam Sensor NPN NO photoelectric Sensor Switch 6-36V Proximity Switch with Infrared Ray Beam E3F-20DNL-Z-12MM
9.3 Easy installation8.7 Durability8.2 PrecisionWhy we love it
Weatherproof construction for versatile indoor/outdoor use.
Easy installation with included mounting brackets.
Affordable yet high-quality performance.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
TaissTaiss/Indoor Wall Mounted Photoelectric Beam Sensor 12-240VDC 24-240VAC Retroreflective photoelectric Sensor Switch Proximity Switch Induction Distance 5M BEN5M
Main highlights- Protection: IP65 ; Body Size: 2.00x1.98x0.75 inch ; Weight: 185g
- Package Content: 1 x Photoelectric Switch, 1 x Reflector Panel, 1 x Mounting Bracket(with screws,nut)
- Modle: BEN5M-MFR； Relection Type: Specular Reflection； Supply Voltage: 12-240VDC 24-240VAC；Load Rating: 3A 250VAC
- Indicator Light Color: Green；LEDs - Green: Active ; LEDs - Yellow: Standby; Current consumption: 15mA； Working temperature: -25-55 degrees; Output: Relay Output
- Detection distance: 5m；Cable Long: 2M; Response Time: < 30ms； Induction Frequency: 200HZ;Output Current: 2A.
9.5Excellent
View offer on:
Show more
3
EDISHINEEDISHINE Outdoor Post Light Accessories, Dusk to Dawn Sensor, Photoelectric Switch for Outdoor Pole Light, Automatic On/Off, Waterproof, UL Listed
Main highlights- 【Wide Application】 Compatible with most bulbs: up to 1800W Tungsten/ 1800VA Ballast/ 5A E-Ballast. Works with most lamp posts, coach lights and pole lights. Black finish matches any apperance.
- 【Waterproof】High quality PC material, protects the sensor against from rain, snow, dust and abrasion, withstands years of use. Shock and erosion resistant, suitable for wet locations. Works with -40°C ~ +70°C Ambient Temp.
- 【UL Listed】120V AC input voltage, 60Hz, threaded diameter 1-3/8" inch. The photoelectric switchis UL certified
- 【Easy to Replace & Mount】Exact replacement for your existing post light sensor, male-female connector design, plug and play, change the original sensor in seconds. 1-3/8" diameter mounting hole for easy installation.
- 【Automatic Light Control】 Automatically switches on post light at dusk and off at dawn, no need manual operation. On level: 10-16 lux, Off Level: ＜65 lux, 30-180S sensor delay prevents accidental triggering of the other lights.
9.4Excellent
View offer on:
Show more
4
AMEIPPhotoelectric Switch Sensor,1 Pair M18 Through-Beam Reflection Optical Photoelectric Beam Sensor,NPN NO (Normally Open) 6-36VDC Photoelectric Switch Sensor
Main highlights- Through beam photoelectric sensor consists of a light projector and a light receiver, both of which are separated in structure. The supply voltage is DC 12V-24V.
- Infrared photoelectric sensor can distinguish the opaque reflective object, with long effective detection distance 5m, less susceptible to interference, long life, and high reliability.
- Function:M18 photoelectric sensor with reverse power protection, short circuit protection, current overload protection, can be directly connected with PLC.
- Dimension:M18*1；DC type：NPN NO， DC 12-24V (6-36V)；Detection range：5m±10%
- Applications: Photoelectric switch sensors have been used as position detection, liquid level control, product counting, width discrimination, speed detection, fixed length cutting, holes recognition, signal delay, automatic door sensing, color scale detection, punching and cutting Machine and security and many other areas.
9.3Excellent
View offer on:
Show more
5
ORRGENA2-Pack, Dusk to Dawn/Day Night Sensor, Photoelectric Switch, Photo Cell Sensor, 110V/120V/220V/240V Input, UL Listed, IP65 Water-Resistant, Photocell for Outdoor Light
Main highlights- UL LISTED PHOTOCELL LIGHT SENSOR -- Covered with UL certificate, surge protection available, heavy-duty body, P65 Water-resistant, AC 120-277 input voltage, 50/60Hz, threaded diameter 1.06 inch, 5-20Lx on and 20-60Lx off operate level.
- RELIABLE QUALITY AND SERVICE -- UL listed, 3 year warranty available. Please feel free to contact us for refund or replacement if you have any questions or quality problem about the outdoor photocell sensor. We will response within 24 working hours
- MULTI VOLTAGE SWIVEL PHOTOSENSOR -- Handles between 120V and 277V and compatible with LED, CFL, fluorescent, incandescent and other types of bulbs, so you can use this photoelectric switch sensor in most various occasions such as outdoor lighting, exterior lighting, street lighting, passage lighting, and doorway lighting.
- EASY TO INSTALL -- With a swivel mount, this outdoor light controller can be easily installed it at a precise spot focusing light. Just disconnect power, place screw thread of the SWITCH in the knockout hole and fasten with rubber gasket and zinc alloy lock-nut.
- DUSK TO DAWN PHOTOCELL SENSOR SWITCH -- This photocell sensor switch will automatically turn on lights at dusk and off at dawn. No need for manual operation anymore. The delay feature in the outdoor light sensor prevents the accidental triggering off the light due to the headlights of a passing car or lightning.
9.2Excellent
View offer on:
Show more
6
MinhoownM18 Infrared Photoelectric Sensor Switch, NPN NO, Easy to Install, Detect Accurate, 5M Detection Range DC 6-36V, Through-Beam Photoelectric Sensors for Arduino Robot Car
Main highlights- 【Specification】Output Form: 3 Wires; Voltage: DC 6-36V; Output State: NPN NO; Detection range: 5m±10%(198in±10%); Detection range regulation: Fixed; Response time: 1ms; Connection delay: 1.5ms; Light source: Infrared light 660nm Input Form: 2 Wires
- 【Features】This is a photoelectric sensor integrating transmission and reception, featuring a large detection range, low interference from visible light, easy assembly, easy use, less susceptible to interference, and long service life.
- 【Application】Through-beam photoelectric sensors for automation, robot obstacle avoidance, assembly lines, 3D printers, limit, positioning, counting and speed testing in light industry, etc.
- 【Accurate Detection】Photoelectric switch sensor utilizes a beam blocked by the test object, detected via synchronous loop gating circuit.
- Photoelectric sensors have been used as position detection, liquid level control, product counting, width discrimination, speed detection, fixed length cutting, holes recognition, signal delay, automatic door sensing, color scale detection, punching and cutting Machine and security and many other areas. In addition,
8.9Very Good
View offer on:
Show more
7
SolusSolus SPC-320 120V Automatic Dusk to Dawn Photocell Photo Control Light Sensor Switch for Hardwire Outdoor Lamp Posts with Ezee Change Plug, Works with Most Fixtures and Bulbs, UL Listed, Black
Main highlights- VERSATILE - Compatible with most bulbs: up to 300W Incandescent, 54W LED, 39W Fluorescent, or 100W H.I.D. light bulbs. Maximum Wattage: 120V, Up to 60 Watts.
- USER-FRIENDLY - Easy to Mount, Easy to Use, and Easy to Change. Works with most fixtures and bulbs for hardwire outdoor lamp posts, only required a 1-3/8" diameter mounting hole. Automatic sensor means no manual operation. And when it is time for a change, you can do so in seconds as this switch comes with our propriety Ezee Change Plug design.
- SAFETY & SECURITY - This UL Listed Component Switch is safe to use for both commercial and residential outdoor fixtures. Ensures light when it is dark. Keeps surrounding safe and unwanted intruders away.
- ENERGY SAVING & HASSLE-FREE - Conserve energy as switch comes with a light control sensor that will automatically turn your lights on at dusk and offs at dawn. No more worries.
- DURABLE - Expect years of performance with the SPC-320 photocell by Solus!
8.7Very Good
View offer on:
Show more
8
Riakrum4 Pieces Dusk to Dawn Sensor for Outdoor Lighting Photocell Sensor Switch Photoelectric Switch for Wall Porch Light (120V)
Main highlights- Easy to use: This photoelectric sensor switch automatically turns on the light at dusk and turns off the light at dawn, without manual operation; The delay function of the outdoor light sensor prevents accidental triggering of the light due to the headlights of passing vehicles
- Easy to install: using the rotary installation method, this outdoor light controller can be easily installed on the precise focusing lamp; Just disconnect the power supply, put the screw wire of the switch into the faucet hole, and lock it with a rubber washer and zinc alloy nut fixed
- Different styles: These photoelectric switch sensors are packaged with NK-GT120VAC 50/60Hz size; Please check the product size before purchasing
- Compatible with LED, fluorescent, incandescent and other types of bulbs, so you can use this photoelectric switch sensor for most applications, such as outdoor lighting, outdoor lighting, road lighting, road lighting and doorway lighting
- Adjustable design: the angle can be adjusted at will, the photoelectric tube can be rotated to achieve a beautiful light direction, and the light can be easily focused on the position you need
8.6Very Good
View offer on:
Show more
9
TaissTaiss/ 1 Pair Photoelectric Sensor M18 Infrared Ray Through-Beam Reflection Optical Photoelectric Switch Sensor NPN NO 6-36VDC Proximity Switch Inductive Distance 5M with mounting Bracket E3F-5DN1
Main highlights- Wire Type : DC 3 Wire, Proximity-sensing / Opposite Type;Type : NPN NO ;Voltage : DC 6-36V
- Product Name : Photoelectric Switch;Sending Light : Infrared Rays;Model :E3F-5DN1
- Current : 300mA;Sensory Distance : 5m;Head Diameter : 1.6cm/0.6'' ; Thread diameter: 18mm
- Cable Length : 120cm/47'';Weight : 110g;Package Content : 1 Pair x Photoelectric Switch + 2 x mounting bracket
- Body Size : 2.3 x 7cm/0.9" x 2.7'' (Max.D*L);Material : Plastic, Alloy;Color : Black, Orange
8.4Good
View offer on:
Show more
10
HQRPHQRP Photocell Thermal Type Light Sensor Stem and Swivel Mount Dusk to Dawn Hardwired Switch Photoelectric Control for Barn Lights Outdoor, Back Yard Lightening, Outdoor Lighting, etc.
Main highlights- UL Listed - To provide good quality and ensure the quality, the photocell sensor is UL certified.
- Rated Volts: 120V AC; Rated Load: 1800W, 1800VA, 5A E-Ballast; LED, HID, Induction, Incandescent, Mercury Vapor, High Pressure Sodium, and CFL Night Light compatible.
- ON/OFF Ratio: 1:5; Fail Mode: ON; Light Sensor: CDS; Switch: >5000 ON/OFF Operations at Rated Load; Cabe: 16AWG*16cm;
- HQRP Thermal Type Photocell Stem and Swivel Mount Light Sensor for Outdoor Lighting;
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for sensor photoelectric switch
