10 Best Roller With Sliding Doors In The Us
2 Pack Sliding Patio Door Roller Assembly Fits for Pella Wood Glass Doors P/N #0C8P0001 (1992 to P), 1-1/2" Steel Ball Bearing, Edge Adjustable, Stainless Steel Housing W/Flange
Main highlights- We recommend replacing both 2 rollers at the bottom of the door at the same time.
- This is a Drive-In style patio door roller assembly that is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw head should face toward the edge or stile of the door.
- The rear adjustment screws allow for quick and easy adjustments with a cross head screwdriver.
- Heavy duty 1-1/2 inch steel ball bearing concaved wheel with 11/16 in. wide and 2-3/4 in. long housing. For further dimensional information, please see the line drawing.
- Commonly used to replace rollers manufactured for Pella wood sliding patio doors Only. NOTE that New Style roller assembly with flange will NOT work on the Old Style, the flange drags along the track.
- Are your wood patio doors sticking or not closing properly? If so, you may need to replace the rollers.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ReigaHood13% Off2 Pack Gliding Patio Door Tandem Roller Assembly Fits for Andersen P/N #1997061 (1982 to P) & Replaces #1273704 (1964 to 1982), 1-1/4" Steel Ball Bearing, Side Adjustable
Main highlights- Works with 200 Series Narroline, 200 Series Perma-Shield and 400 Series Frenchwood Gliding Patio Door manufactured from 1982 to Present.
- We recommend replacing both 2 rollers at the bottom of the active door panel at the same time.
- This is a Push-In style patio door roller assembly that is push into a rectangular mortise in the bottom of the door. The housing has 2 top insert points and 4 side locking tabs to hold it in place.
- Fits for Andersen gliding patio doors P/N #1997061 made after 1982. Replaces old style steel tandem roller P/N #1273704 made from 1964-1982.
- Features side adjustment on both sides: Either you use a flat head screwdriver or an Allen wrench to carefully try turning your screwdriver one way or the other to figure out which direction you need to turn.
9.5Excellent
View offer on:
Show more
3
Augenweide2 Pack Sliding Patio Door 1-1/4 Inch Tandem Roller Assembly, Steel Ball Wheel Bearing Rear Adjustable Sliding Door Wheel Replacement for Sliding Glass Door Screen Door Gate Window - 4 Srews Included
Main highlights- 【Wide Range of Applications】sliding patio door roller wheel works well for sliding glass door, screen door, sliding gate, window, vinyl patio doors, closet and more, versatile and practical.
- 【Stander Size】The sliding patio door roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter.
- 【Simple to Install】the sliding door roller assembly can be installed fast and effortlessly without extra tools, just remove the broken or missing tandem roller assemblies from your sliding glass doors or windows, then install our glass patio door rollers, and your sliding glass door will function well again.
- 【Package Included】 Includes 2 x Sliding Patio Door Roller (1x sliding door roller include 2 x srews,total 4 x srews). Replace old or damaged Rollers, commonly used by a variety of sliding glass door manufacturers to replace rollers on extruded aluminum or vinyl sliding patio doors.
- 【Durable and Solid Construction】The sliding patio door roller made of high quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 330 pounds (150kg). While others may use the bearings made from Carbon Steel W/O heat treating, We insists all bearings made from Heat Treated Bearing Steel.
9.4Excellent
View offer on:
Show more
4
Augenweide2 Pack Sliding Glass Door Rollers Replacement, 1-1/4" Steel Ball Bearing Patio Door Wheels, Heavy Duty Tandem Wheels Assembly for Andersen, Truth Part #31761A, Jeld Wen, Milgard, Marvin, Peachtree
Main highlights- 【Standard Dimension】Heavy duty 1-1/4 inch steel ball bearing wheel with 11/16 inch thick housing and 5-3/4 inch hole centers. For further dimensional information, please see the line drawing.
- 【Sliding Glass Door Rollers Replacement】These sliding door wheels are compatible with common wood, extruded aluminum or vinyl framed sliding glass doors manufactured by Jeld Wen, Truth 31761A & Truth 30410, Milgard, Marvin, Malta, Peachtree, Weathershield, Pozzi, Hurd, Lincoln, Caradco, Eagle, K&K - Kolbe & Kolbe, Andersen and others.
- 【Simple to Install】The sliding door roller assembly can be installed fast and effortlessly without extra tools, just remove the broken or missing tandem roller assemblies from your sliding glass doors or windows, then install our glass patio door rollers, and your sliding glass door will function well again.
- 【Side Adjustment】This common tandem roller wheels features a 1 1/4" steel concave ball bearing wheel and a side adjuster that is accessed through the face of the sliding door panel. Easy adjustable with a flat or cross head screwdriver.
- 【Durable and Solid Construction】The sliding patio door roller made of high quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 330 pounds (150kg). While others may use the bearings made from Carbon Steel W/O heat treating, We insists all bearings made from Heat Treated Bearing Steel.
9.2Excellent
View offer on:
Show more
5
PRIME-LINEPrime-Line D 1984 1-1/2 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack)
Main highlights- Used by a variety of sliding patio door manufacturers
- Stamped steel housing with ball bearing rollers
- Plain back housing with a 1/4-20 threaded mounting hole
- Features rear screw adjustment
- 1-1/2 inch diameter tandem concave steel rollers
9.1Excellent
View offer on:
Show more
6
HauSunSliding Patio Door Tandem Roller Assembly,1-1/4 Inch Steel Ball Wheel Bearing, 2 Pack
Main highlights- 【STANDARD SIZE】The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter
- 【SOLID CONSTRUCTION】high quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the bearings made from Carbon Steel W/O heat treating, We insists all bearings made from Heat Treated Bearing Steel.
- 【INCLUDES】 Includes 2 x Sliding Patio Door Roller, used for replacing damaged or missing roller assemblies on sliding patio doors
- 【GUARANTEE】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us
- 【EASY TO INSTALL】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly
8.9Very Good
View offer on:
Show more
7
PRIME-LINEPrime-Line N 7536 Sliding Closet Door Roller Kit (1 Kit)
Main highlights- Please refer to the line art drawing for dimensions and compare with your needs before ordering
- One spring-loaded Prime-Line part N 6614 top roller guide with a 7/8 inch plastic wheel, and a 3/8 inch diameter nail-down style base
- One spring-loaded N 6612 top pivot with a 1/4 inch diameter steel pivot and a 3/8 inch diameter nail-down style base
- One adjustable Prime-Line part N 6613 bottom pivot with a 1/4 inch diameter steel pivot and a 3/8 inch diameter nail-down style base
- Installation fasteners included with this item
- Includes one spring-loaded Prime-Line part N 6611 top roller guide with a 3/4 inch plastic wheel, and a 3/8 inch diameter nail-down style base
- All items are spring-loaded except for bottom pivot
- A soft mallet may be required for installation
8.8Very Good
View offer on:
Show more
8
HauSunHeavy Duty Sliding Patio Door Roller Assembly 1-1/4 Inch Steel Ball Wheel Bearing, Side Adjustable,2 Pack
Main highlights- ★【Standard Size】 The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter, 5-3/4-inch hole centers. This roller assembly has a minimum collapsed height of 1-1/2 in.
- ★【Solid Construction】High quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the bearings made from Carbon Steel W/O heat treating, we insists all bearings made from Heat Treated Bearing Steel
- ★【Lifetime Guarantee】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us
- ★【Includes】 Includes 2 x Sliding Patio Door Roller,used for replacing damaged or missing roller assemblies on sliding patio doors
- ★【Easy to Install】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly
8.7Very Good
View offer on:
Show more
9
KOROP AUTO PARTSSliding Door Roller 1 pair for 2005-2010 Honda Odyssey EX EX-L Touring,Power Slide Door Roller Assembly Replace # Left 72561-SHJ-A21, 924-128. Right 72521-SHJ-A21, 924-129
Main highlights- WARRANTY - This Power Sliding Door Roller Assembly comes complete with 2 years warranty.Worry-Free Return And Refund Policy, Buy with Confidence!
- REPLACES PART # 72561-SHJ-A21,72561SHJA21, 924-128. 72521-SHJ-A21,72521SHJA21, 924-129
- REPLACEMENT POWER SLIDING DOOR ROLLER ASSEMBLY- If your sliding door does not close properly or wiggles then you may have a problem with your sliding door roller.Now you can easily restore the side door to proper, smooth operation with our Power Sliding Door Roller Assembly.
- HIGH QUALITY-Made of High Quality & Durable Material.Tested & certified to meet or exceed OEM quality standards.The price is only a small part of the dealer!
- FITMENT -2010 Honda Odyssey EX，EX-L，Touring 2009 Honda Odyssey EX，EX-L，Touring 2008 Honda Odyssey EX，EX-L，Touring 2007 Honda Odyssey EX，EX-L，Touring 2006 Honda Odyssey EX，EX-L，Touring 2005 Honda Odyssey EX，EX-L，Touring
8.6Very Good
View offer on:
Show more
10
PRIME-LINEPrime-Line D 1791 1-1/8 in, Steel Ball Bearing, Tandem Roller Assembly, Golden
Main highlights- STRONG AND DURABLE – Made of stamped steel housing with concave steel ball bearing rollers in a golden finish, these sliding door rollers are strong, durable, and built to last
- SLIDING DOOR ASSEMBLY – Replace or repair broken or missing sliding door rollers with this adjustable tandem roller assembly
- PATIO DOOR ROLLERS – This door roller assembly is used by Milgard as well as a variety of other manufacturers; primarily used on vinyl patio doors
- NOTE - Please refer to the line art drawing for dimensions and compare to your needs before purchasing
- DIMENSIONS – The housing of the patio door replacement rollers is 3/4 inch wide and 1 inch tall with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on the top
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for roller with sliding doors
