10 Best Relé Arduino In The Us
Best Choice1
DaFuRuiDaFuRui 5v Relay Module，8Pack 1 Channel Relay Module 5v Relay Board with Optocoupler Support High/Low Level Trigger for Arduino Relay
Main highlights- ★【Widely Used】Standard interface can be directly connected with microcontrollers. Apply to ARM、PIC、AVR、MCU、Raspberry、CNC machine and PS4 etc.
- ★【Powerful Function】The module can be set high or low triggered by jumper.Module size：50*25*18.5mm.
- ★【Excellent Quality】Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.Trigger current 5mA.
- ★【Easy to Install】Equipped with a terminal block and fixed bolt holes on both sides (diameter: 3.1mm), the interface can be directly connected through the terminal block.
- ★【Design Features】 Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HosyondHosyond 6Pack 2 Channel DC 5V Relay Module with Optocoupler Relay Board for Arduino Raspberry Pi MEGA2560
Main highlights- Widely used in all MCU control, industrial fields, PLC control, smart home control.
- The relay has a standard interface and can be directly connected to the microcontroller, which is convenient for wiring. Package contains 10 male to female DuPont wires.
- The power supply voltage of the relay module is DC5V. The maximum output load is AC250V 10A and DC30V 10A.
- The 2 channel relay interface board can directly control Arduino, AVR, PIC, ARM, PLC and other single-chip microcomputers, and can also control various high-current electrical appliances and other equipment.
- High Level or Low Level Trigger. Pull in at low level and release at high level. The status indicator is on when it is pull in, and it is release when it is released.
9.7Exceptional
View offer on:
Show more
3
Teyleten RobotTeyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Main highlights- Original Songle Relay
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- 30VDC 250VAC Load：The power switch is compatible with 10A 250VAC and 10A 30VDC load.
9.4Excellent
View offer on:
Show more
4
AITRIPAITRIP 10PCS 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger Compatible with Arduino Raspberry pi ARM AVR
Main highlights- he control DC or AC signal, you can control 220V AC load.
- Supply Voltage: 5V Quiescent Current: 4mA Working Current: 65mA Trigger Voltage: 0-2V Trigger Current: 2mA
- Package and Quantity: 10pcs 1 Channel 5V Relay Module Shield
- Meet International Safety Standards: the control area and the load area have isolation tank.
- It can be not only used as a microcontroller development board module, but also as a home appliance control.
9.3Excellent
View offer on:
Show more
5
AZKO5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Main highlights- 【Wide Application】-These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- 【Adopted SMD Optocoupler Isolation& jumper Set】- The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- 【5V 1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
9.2Excellent
View offer on:
Show more
6
ValefodValefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Main highlights- 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- 【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected.
- 【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
9.0Excellent
View offer on:
Show more
7
ELEGOOELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Main highlights- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: https://dwz.win/UhW
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
8.9Very Good
View offer on:
Show more
8
AEDIKOAEDIKO DC 24V Relay Module Relay Board 8 Channel OPTO-Isolated High or Low Level Trigger
Main highlights- Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
- 8 Channel Relay Module Voltage : 24V; Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A
- 8 Channel Relay Module 24V Comes with High-Current Relay,Trigger Current : 5mA
- 8 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers
- 24V Relay Module is 8 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input
8.8Very Good
View offer on:
Show more
9
SainSmartSainSmart 5V 2-Channel Solid State Relay Board for Arduino Uno Duemilanove Mega2560 Mega1280 Arm Dsp Pic
Main highlights- Size:62 x 42 x 24mm
- Rated output load: 2A at 100 to 240VAC. (50/60Hz)
- Power supply: 5V DC(160mA)
- Load type: General purpose.
8.7Very Good
View offer on:
Show more
10
ANMBESTANMBEST 2PCS 4 Channel 24V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Main highlights- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- It is 4 Channel Isolated 24V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for relé arduino
