10 Best Power Bank Diy 18650 1 In The Us - Black Friday 2024
XBERSTAR 18650 Power Bank case,Li-Ion Battery Storage Box -18650 Holder for Uninterrupted Power Supply UPS DIY Battery Special Plastic DIY kit (set1)
Main highlights- You will get;3S 40A BMS -US Charger -18650 Li-Ion Battery Holder -Pure Nickel Strip(not include batteries )
- Installation: Easy and simple to use and operate, no other tools needed to install.Install the battery according to the positive and negative sides on the circuit board. Be careful not to reverse it.
- High quality battery holder case with wire leads for easy soldering and connecting.Each battery holder comes with a case cover for keeping the battery in place
- Attention: There is a specific product description on the picture, please read it in detail.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
LIJIANILIJIANI Battery Charger Case,Portable DIY Power Bank Box with LCD Display 2 USB Output,Micro and Type c Input, Smart Charger for 3.7v Li-ion Rechargeable Battery (Battery Not Included)
Main highlights- Multifunctional charging case: 4 battery(0.7 inches in diameter - 2.56 inches long) charging case, LCD display battery voltage and current value, the remaining battery power. Can easily remove the battery to power other devices
- Mobile power function: filled with batteries, it is a 10000 mah rechargeable treasure (choose 4 2500 mah batteries), if you choose 3500 mah / a battery, it is 14000 mah rechargeable treasure. Not recommended, different sizes of batteries loaded into use at the same time
- Dual-port input : (MICRO and TYPE-C) 5V-2A, two USB output, 5V-2A, long press the switch can open the flashlight function
- Concern: This product does not include batteries, unfamiliar with Cylindrical lithium batteries, people without DIY spirit, please be careful to buy
- Bad battery detection function: if you load a bad battery, or the battery positive and negative poles are installed backwards, no battery symbols on the LCD display, only normal batteries appear battery symbols
9.7Exceptional
View offer on:
Show more
3
UMLIFEUMLIFE 4pcs 18650 Charging Board ，Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Main highlights- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5～45℃.
- Size: 6.5 * 2.5 * 0.1cm;
- Dual Output Current: 5V 2.4A；Constant Current: 2.4A;
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
9.6Exceptional
View offer on:
Show more
4
LHIABNNLHIABNN DIY Power Bank Box Flat Head Battery Charger Outer Case,2 USB Output Ports Plastic Shell Box with LCD Display,Micro/Phone/Type-c Input Port Power Bank Case (Black)
Main highlights- 【Widely Use】: Compatible For Phone 11 pro max X XR XS 8 7 6 plus/6/5S,for pad,for Samsung Galaxy S8 S7 S2/S3/S4, Note 2/3/4, HTC, for Sony, Xiaomi Motorola and other cellphones. Application - Suitable for various models of mobile phones that support wireless charging fuction.
- 【LCD Display】: Accurate display of power, keep the battery status at any time.Power bank and rechargeable 18650 battery charger. Plug and Play, power output using the USB port, plug the data cable to achieve portable, ready to charge.
- 【Intelligent 18650 Battery Charger】: Compatible with 18650 Flat head lithium battery (69mm length). Each battery slot is individual charging and detection. It automatically terminates charging when the batteries are full charged.(NOTE: Please notice the positive and negative poles)
- 【Easy to Use】: Compact and lightweight design for easy carrying; Easy to install and uninstall; Convenient take and use.
- 【DIY Power Bank】: Large capacity,8 x 18650 batteries (batteries not included). Dual USB power bank, two devices can be charged at same time.Three input ports,any usb cable can charge the power bank.
9.5Excellent
View offer on:
Show more
5
LHIABNNLHIABNN DIY Power Bank - Make Your Own External Battery Pack,2 Output 3 Input (Mirco,Type C,Lighting) - Battery Not Include (Black)
Main highlights- Size: 17x8x2.3cm
- Packing: Only 1 Pieces Plastic Case
- Material: Plastic
- Compact and lightweight design for easy carrying; Easy to install and uninstall; Convenient take and use.
- Any questions pls feel free to contact us.
9.4Excellent
View offer on:
Show more
6
JOYSOGJOYSOG 18650 DIY Power Bank Case for 18650 Battery Power Bank, 3 USB Rechargeable Battery Charger DIY Box Micro/Type C Input Mobile Power Bank Case (White)
Main highlights- This Portable DIY Power Bank Box with LCD Display of power, keep the battery status at any time. Plug and Play, ready to charge.
- The battery capacity must be the same. Do not reverse the battery, otherwise the motherboard will be damaged.(The sheet is positive and the spring is negative.)
- Small and light 100000 mAh 18650 DIY Battery Bank. easy to carry and store, convenient to use.
- Made of high quality ABS material, sturdy, durable and long service life.
- Large capacity, 3 x 18650 batteries (batteries not included). the 18650 power bank case shell has 3 input ports, 5V/1A charge modes.
9.3Excellent
View offer on:
Show more
7
AcxicoAcxico 1Pcs QC3.0 USB-c PD Lithium Li-ion 18650 Battery Quick Charge Module DIY Power Bank
Main highlights- W332 version: Support charging and discharging at the same time.Used to DIY or upgrade the power bank!
- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
- Package Included:1Pcs QC3.0 usb-c PD Lithium Li-ion 18650 Battery Quick Charge Module DIY Power Bank(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
- Module size: length 60.35mm; maximum width 23mm; maximum height 5.15mm, (Manual measurement, for reference only)
- Main control: W332, now the mainstream fast charging chargers all use W332, bidirectional PD, QC3.0 fast charging, support and compatible with more fast charging protocols.
9.2Excellent
View offer on:
Show more
8
BistookBistook Battery Holder DIY,1 Slot 18650 Battery Holder Box Case-Transparent Cover,No Soldering,Brass Contacts Storage Case with Protection Caps for DIY,6-Pack
Main highlights- Widely Applications: It can be applied to DIY electronics according to your needs. You can also add your own circuit board to convert the battery box into a power bank. This battery holder case can unleash your creativity.
- Warm tips：This product is suitable for DIY and does not include batteries. It's best to use a consumer 18650 flat head battery.
- Protective accessories: The two sides of the DIY battery storage case are with a protective shell with a mortise and tenon structure, which effectively prevents contact with conductive surfaces, and protects the device safely and reliably.
- Material: The battery holder is made of PC+ABS material, and the positive and negative terminals are supported by pure copper M3 screws, which can effectively reduce the resistance. Support 5A(Max) high current.
- Flexible use: Each18650 battery slot is equipped with a transparent plastic cover, which can better fix the battery. You can also splice infinitely according to your own electronic needs and give full play to your creativity
9.1Excellent
View offer on:
Show more
9
abovehillAbovehill 18650 Mobile Battery Box with LED Light and Battery Indicator,Dual USB and DC Outputs for iPhone and Android Phones
Main highlights- 5.It is equipped with 4 LED lights to display the current battery margin. Also equipped with a 5mm LED emergency light, you can bring light to you in the wild or in the dark. A variety of uses, let you like it more.
- 4.The charging and discharging part of the main control chip adopts a synchronous rectification circuit, which improves the conversion efficiency and greatly reduces the heat generation. Output current limit protection, when the rated output current is exceeded, the output voltage is automatically reduced to protect the circuit.
- 3.It is also equipped with a separate DC output port that can be adjusted with four gear positions (3.8/6/9/12V). The USB port and DC port can be used at the same time without mutual interference.
- 2.It comes with two USB output ports for Apple and Android phones. Resolved compatibility issues for charging most phones. There is an image label at the output port, which is convenient for selecting the correct port to replenish the battery in time.
- 1.It is an 18650 battery case and a mobile power box. It requires to install 6 18650 rechargeable batteries. The installed battery can be charged directly via the charger. Input voltage is 5V, current is 1A-2.1A
8.8Very Good
View offer on:
Show more
10
BYNNIX18650 Charger Box USB Mobile Holder C16PD Version Power for Shell Charger Box with Lighting Power Kit 18650 DIY Removable Welding-Free 16-Section 18650 Power Kit DIY Mobile (Black)
Main highlights- Weight: about 206 grams without (for case + mainboard + spring basket + lens + lanyard).
- Size: thickness 44mm width 80mm length 186mm(internal dimensions remove spring: thickness 36mm width 72mm length 146mm).
- Cell: 18650 type flat for head x 16 (free welding).
- C16-PD with light: output/input power: 5V-3A 9V-2A 12V-1.5A.
- Application: Good performance, convenient and practical, suitable for home and professional use.
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for power bank diy 18650 1
