10 Best Pipe for Heating Floor In The Us - Black Friday 2024
Best Choice1
BanfluxionBANFLUXION 1000Ft 0.63"*0.79" PEX Tubing 3/4" Oxygen Barrier PEX Tubing EVOH PEX-B Floor Heating Pipe for Plumbing and Hydronic Systems Red
Main highlights- 【Surface Material】The outside surface of this floor heating pipe uses EVOH oxygen barrier layer, which can block the oxygen, keeping the metal components in good condition.
- 【Parameters】Total Length: 1000Ft; Nominal Diameter: 3/4"; Inside Diameter: 0.63"; Outside Diameter: 0.78"; Tube Thickness: 0.08"; Temperature Range: -45 to 110℃/-47℉ to 230℉ Pressure Rate: 188-217psi at 20℃; 101-108psi at 95℃; Minimum Bending Radius: 7"
- 【Multifunction】This floor heating pipe is suitable for plumbing and hydronic systems, which can be used on hot/cold potable water lines.
- 【Inner Pipe】The inner pipe of this PEX tubing is smooth and has anti-scaling, helping improve heat diffusion efficiency and save energy.
- 【Compatibility】This PEX tubing is applicable for most connection system and floor types, such as crimp connection system (crimp tool + crimp rings + crimp fittings), cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings), compression PEX fittings; thick/thin concrete slabs, under-sub-floor, hanging floor and so on.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
PreAsionPreAsion Radiant Heat Pex Manifold 8 loops Pex manifold 1/2” Stainless Steel Pex Pipe Pex Tubing 1/2” Radiant Floor Heating Set with Flow Meters
Main highlights- Variety models, which can meet various needs to the extent. If you have any questions, please contact us in time and we will solve them as soon as possible.
- The water flow of each branch can be adjusted individually, so that the water flow of each channel will be balanced, and no water grab phenomenon will occur, thereby reducing energy consumption and achieving the purpose of energy saving.
- The main body is made of 304 stainless steel, which is sturdy and reliable. The tube body is demagnetized as a whole, does not absorb impurities, prevents internal clogging, and effectively extends the service life of the water separator (longer than the life of the non-demagnetized water separator).
- The internal copper spring cut-off valve core is used, which can increase the life of the common valve core by more than 3 times. With the intelligent temperature control package, automatic temperature control can be realized.
- Equipped with automatic exhaust drainage valve, if there is more gas in the heating water pipe, using the automatic exhaust drainage valve can effectively exclude the body inside the pipe, increase the flow and improve the heating effect.
9.7Exceptional
View offer on:
Show more
3
VEVORVEVOR Oxygen-Barrier PEX Tubing 1000Ft PEX Tubing Pipe 1/2" PEX Radiant Heat Floor Heating Plumbing Cold and Hot Water Tubing
Main highlights- 【ROBUST O2 RESISTANCE】- Unique EVOH layer, stop O2 into the tube, protect metal components from corrosion. This non-broken 1/2" PEX tube can tackle different weather circumstances, no matter the high or low temperature, to ensure the integrity and safer use for longer life expectancy.
- 【RELIABLE PEX MATERIAL】- Color: Red; Nominal Diameter: 1/2"; Total Length: 1000 ft. Outside Diameter: 5/8"; Inner Diameter: 1/2"; Keep quick & smooth hot/cold water flows. Made of PEX material, non-toxic, crack-proof, leak-proof. Perfect for potable water or radiant floor water use.
- 【PREMIUM FLEXIBILITY】- PEX pipes exhibit remarkable flexibility and can be bent into circular shapes without fracturing, offering excellent resistance to cracking and adapting easily to various ground conditions. They are suitable for different pressure levels at varying temperatures: 80 psi at 200°F, 100 psi at 180°F, and 160 psi at 73°F, making them well-suited for a wide range of usage conditions. Compatible water temperature: -40℃ to 95℃/-40℉ to 203℉.
- 【EFFORTLESS INSTALLATION】- Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings); Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings); Press system (by Viega); Compression PEX Fittings.
- 【DIVERSE USE SCENARIO】- Suit for home & commercial use, like radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between subfloor and finished floor), Snow & ice melting systems etc.
9.5Excellent
View offer on:
Show more
4
ABWiseWater Radiant Heat Manifold, 6 Loop PEX Tubing Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating(1/2" connectors included)
Main highlights- 【Product Parameter】6 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.4 GPM high flow meter. Compatible with 1/2" and 3/4" tubing outlets, great for radiant floor heat systems.
- 【Premium Quality】WiseWater Pex Radiant Manifolds are made of durable stainless steel material, which is corrosion-resistant and pressure-resistant and has higher thermal conductivity, faster heating and insertion into plastic pipes.
- 【Easy For Installation】Heavy duty stainless steel mounting bracket is included makes it attachable to any wall easily. No PEX tools required，Just use regular pliers or adjustable wrench to connect PEX tubing to the manifold. Pressure tested and pre-assembled. Simply mount the manifold on brackets and connect valves and PEX tubing.
- 【All In One】Each radiant heat manifold includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks.
- 【100% Satisfaction Service】We provide premium quality as well as 100% Satisfaction Service, please feel free to contact us if you have any question about out product.
9.4Excellent
View offer on:
Show more
5
VEVORVEVOR 3/4" X 500Ft PEX Tubing Oxygen Barrier O2 EVOH Pex-B Red Hydronic Radiant Floor Heat Heating System Pex Pipe Pex Tube (3/4" O2-Barrier, 500Ft/Red)
Main highlights- 【ROBUST O2 RESISTANT】- Unique EVOH layer, stop O2 into the tube, protect metal components from corrosion. Heating system's service time can be greatly lengthened. Smooth inner pipe, anti- scaling quality, increase heat dissipation efficiency & speed for energy-saving.
- 【RELIABLE MATERIAL】- Type: Oxygen-Barrier; Color: Red; Nominal Diameter: 3/4"; Total Length: 500ft. Outside Diameter: 0.86"; Inner Diameter: 0.66"; Tube Thickness: 0.1"; Keep quick & constant hot/cold water flows. Made of PEX material, non-toxic, crack-resistant, leak-proof. Perfect for potable water or radiant floor water use.
- 【PREMIUM FLEXIBILITY】- Min.7" bending radius, this radiant floor heating system is easy to bend for different ground situation. Big pressure capacity: 188-217psi at 68℉; 101-108psi at 203℉. Temperature Range: -45 to 110℃(-47℉ to 230℉).
- 【EFFORTLESS INSTALLATION】- Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings); Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings); Press system (by Viega); Compression PEX Fittings.
- 【DIVERSE USE SCENARIO】- Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.
9.1Excellent
View offer on:
Show more
6
GPOAS3-Branch Radiant Floor Heating PEX Manifold Set 3 Loop 1/2 Inch Stainless Steel PEX Tube,For Hydronic Radiant Floor Heating
Main highlights- [VISUAL FLOW METER]:The water inlet branch is equipped with a visual flow meter type shut-off valve, which can accurately adjust the water flow of each channel and prevent the branch from grabbing water. Just open the red cap and turn the red base to adjust the water volume of each channel to 0-5 liters/min. Effectively ensure the hydraulic balance of each road
- [PRODUCT PARAMETER]:3 LOOPS,Heat can be transmitted 30-45 square meters.1" NPT supply and return shut-off ball valves,SUS 304 stainless steel cold forming, corrosion resistance, no rust, better sealing, more precise control, the main tube is not demagnetized as a whole, longer life than demagnetization tubes, and higher hardness
- [EASY TO DISASSEMBLE]:Each part can be replaced and disassembled separately, the stainless steel body can be used for a long time, the internal space is large, and the flow is sufficient. It is a cost-effective water distributor, which is widely used in floor radiant heating systems, but not suitable for drinking water applications
- [AUTO EXHAUST VALVE]:Automatic exhaust valve, in a continuous automatic manner, Eliminates the air inside when the system is filled with water and during operation.A hygroscopic vent cap prevents accidental drips
- [ALL-COPPER NICKEL-PLATED HEXAGONAL LOWER JOINT]: All-copper material, nickel-plated treatment, anti-corrosion and durable, standard 6-point thread, 1/2 adapter, suitable for PERT PEXD and other floor heating pipes with an inner diameter of 12MM and an outer diameter of 16MM, professional thread sealant, Reinforcement + double seal to lock water
9.0Excellent
View offer on:
Show more
7
VANCOCO10% Off4 Loop PEX Manifold Radiant Floor Heating System with 1/2" PEX Tube Adapters,Stainless Steel Manifold for Hydronic Radiant Floor Heating
Main highlights- [SATISFACTION]: If you have any questions about our pex manifold, please contact us and we will provide you with solution.
- [PREMIUM MATERIALS]: The manifold is made of high-quality 304 stainless steel material with brushed surface, rust prevention,pressure-resistant, good sealing, high coefficient of thermal conductivity, fast heating speed;
- [PRECISE CONTROL]: Stainless steel radiant heat manifold, double-layer stainless steel, heat insulation & anti-scald, 5-position sealing spool, good sealing, intelligent temperature control, convenient and safe, for hydronic floor heating;
- [EASY INSTALLATION]:Use screwdrivers & adjustable wrenches, simply connect the PEX tube to the manifold first for a pressure test, then simply mount the manifold on the included stainless steel bracket and connect the valve and the PEX tube, which can be easily installed on the wall.
- [ALL-IN-ONE DESIGN]: 4-loop manifold with adjustable flow meter, intelligent temperature control valve, temperature gauge, drain valve, 1/2" adapter, automatic air vent, inlet/outlet ball valves, complete accessories.
8.8Very Good
View offer on:
Show more
8
VEVOR10% OffVEVOR Oxygen Non-Barrier PEX Tubing 300 Ft White 3/4 Inch PEX Pipe Radiant Heat Floor EVOH Pex-B Heat Durable Plumbing Flexible for Residential Commercial Heating Plumbing
Main highlights- 【SUPERB SEALING】- Non broken design, tackle with different weather circumstance, no matter high temperature or cold days, it will not deform, thus to ensure integrity and safe use.
- 【RELIABLE QUALITY】- Color: White; Nominal Diameter:3/4"; Total Length: 300ft. Keep quick & uninterrupted hot/cold water flows. Made of PEX material, non-toxic, crack-resistant, leak-proof. Perfect to at potable water or radiant floor water use
- 【PREMIUM FLEXIBILITY】- Min. 5ft bending radius, easy to bend for different ground situation. Big pressure capacity:188-217psi at 20℃ and 101-108psi at 95℃. Compatible water temperature:-47℉ to 230℉. Thus to ensure its good temperature resistant, crack- & leakage-proof.
- 【EFFORTLESS INSTALLATION】- Send with a pipe cutter & 10 clamps, easily cut pipes to different length and fix them with clamps. Assemble method: Clamp Connection Systems(Cinch Tool + St. Steel Clamps + Crimp Fittings).
- 【DIVERSE USE SCENARIO】- Suit for radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.
8.7Very Good
View offer on:
Show more
9
Happybuy15% OffHappybuy 3/4" PEX Tubing 500Ft Non-Barrier PEX Pipe Red Pex-b Tube Coil for Hot and Cold Water Plumbing Open Loop Radiant Floor Heating System PEX Tubing (3/4" Non-Barrier, 500Ft/Blue)
Main highlights- 【RELIABLE MATERIAL】- Type: Non-Barrier; Color: Blue; Nominal Diameter: 3/4"; Total Length: 500ft. Keep quick & constant hot/cold water flows. Made of PEX material, crack-resistant, leak-proof. Perfect for potable water or radiant floor water use.
- 【PREMIUM FLEXIBILITY】- Min.7" bending radius, easy to bend for different ground situation. Pressure rate: 188-217psi at 20℃, 101-108psi at 95℃. Compatible water temperature: -45 to 110℃(-47℉ to 230℉). Thus to ensure good temperature resistant, crack- & leakage-proof of the 3/4" PEX.
- 【GREAT SEALING FUNCTION】- Non broken design, tackle with different weather circumstance, no matter high temperature or cold days, this radiant floor heating system will not deform, thus to ensure integrity and safe use.
- 【EFFORTLESS INSTALLATION】- Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings); Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings); Press system (by Viega); Compression PEX Fittings.
- 【DIVERSE USE SCENARIO】- Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.
8.6Very Good
View offer on:
Show more
10
A BST10-Branch PEX Manifold, ABST Stainless Steel Floor Heat Manifold Kit with 1/2" Adapters Included for Hydronic Radiant Floor Heating
Main highlights- 【Product Parameter】10 loops,1" NPT supply and return shut-off ball valves,up to 1.32GPM high flow meter,1/2" adapters included(20 pcs),compatible with 1/2" PEX pipes.
- 【PEX Radiant Heat Manifold Kit】Each kit includes flow meter,auto exhaust &drain valve,1/2”adapters,temperature control handwheel,centigrade fahrenheit integrated temperature gauge,inlet&return water valve.
- 【High Quality】ABST PEX radiant manifold is made of high-quality 304 stainless steel material,which is wear-resistant,anti-corrosion,pressure-resistant,and has a higher thermal conductivity,transmitting heat more effectively.
- 【Easy to Install】The floor heating manifold kit is equipped with a stainless steel mounting bracket,which can fix the water distributor on the wall or the box.Simply use regular pliers to install the main on the bracket and connect the inlet and outlet main valves to the automatic exhaust and drain valves.Pressure tested and pre-assembled for peace of mind.
- 【Auto Drain Exhaust】There is more gas in central heating,and the use of automatic exhaust and drain valves can effectively remove the gas in the pipe,increase the flow,and improve the heating effect.
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for pipe for heating floor
