10 Best Photon Monox Screen Protector In The Us - Black Friday 2024
Best Choice1
ANYCUBICANYCUBIC 10.1 Inches LCD Screen Protection Film for Photon Mono M7/Photon Mono M7 Pro Resin 3d Printer, 5pcs
Main highlights- ANYCUBIC 10.1 Inches LCD Screen Protection Film for Photon Mono M5s/Photon Mono M5s Pro Resin 3d Printer, 5pcs
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ANYCUBICANYCUBIC Screen Protector for Photon M3 Max, 13.6Inches Anti Scratch Film, 5pcs
Main highlights- Protect LCD screen, the anti scratch film can effectively prevent damage to the LCD screen caused by resin leakage or resin curing directly above the screen, and also prevent screen scratches during the movement of the resin tank
- Packaging information, this package provides 5 anti scratch films and comes with the same number of auxiliary sets, which are perfectly suitable for anysub Photon M3 Max.
- Installation, install in a clean environment, please use the auxiliary set to clean the LCD screen before Installation. A certain amount of bubbles will appear during installation, and stuff like plastic shovels can be used to push away the bubbles. As long as there are no bubbles on the screen position, it will not affect printing
9.6Exceptional
View offer on:
Show more
3
Mach5iveMach5ive Screen Saver- Clear Screen Protector for Photon Mono X / 6K / 6Ks (3-Pack)
Main highlights- SAVE YOUR SCREEN! The Mach5ive Screen Saver is your custom, clear screen protection solution for the Anycubic Photon Mono X, Photon Mono X6K & Photon M3 Plus. *NOTE: For the M3 plus, you will need to modify for the resin feeder. Protects the screen and covers the gap around the edges of the screen. You must re-level your build plate per the instructions included after install. You may need to increase your exposure times, as the Screen Saver will allow greater than 93% of the light through.
- SAVE TIME WITH PREP - Now you're no longer forced to tidy up your printer right after a print. Apply our Screen Saver and have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks.
- QUALITY PROTECTION – Why take the risk of damaging your printer internals, LCD or FEP film? Avoid expensive repairs by applying our Screen Saver and protecting your printer. Several sizes are available!
- IMPORTANT - Installation requires some skill. Although a bubble-free installation is ideal, a few small bubbles will not affect your prints. Bubbles around the perimeter of the screen, where it does not light up, is normal. Peeling off the protective film may generate static electricity and attract dust. Install in a clean environment. Protectors are designed to be larger than the screen in order to prevent resin seepage into the machine. PLEASE CONTACT US FIRST FOR HELP with any issues.
- EXTRA DURABLE - Made of high-quality PET, our Screen Saver is built to last. At .13 mm thick installed, it is resin-proof and safe from tears and abrasion, while remaining very flexible. Kit includes 3 Screen Savers, instructions, cleaning cloth, alcohol wipe, & squeegee.
9.3Excellent
View offer on:
Show more
4
HzdaDeveHzdaDeve 5PCS Screen Protector for Photon Mono M7/Photon Mono M7 Pro 10.1 Inch LCD Anti Scratch Protective Film Screen Protection Film for Anycubic Resin 3D Printer
Main highlights- This screen protector is compatible with Anycubic Photon Mono M7/M7 Pro SLA Resin 3D Printer
- Thickness: 0,125mm. Please level the printer after installing the film, then it'll have good result.
- The screen protector can not only protect the screen from scratches, but also prevent leaking resin from contaminating the screen due to damage to the release film.
- The foils are very easy to stick on the display and are very light permeable so that they have no disadvantage when they are glued
- 95% light transmittance, which ensures high stability of UV lighting and does not affect the print result.
9.2Excellent
View offer on:
Show more
5
UniTak3D24% OffAnycubic Photon Mono M5s 3D Printer Screen Protector,Original Protective Film 5Pcs for 10.1 inch LCD SLA UV Resin 3D Printer-Thickness 0.1mm-ONLY for Photon Mono M5s&M5s Pro NOT for Photon Mono M5
Main highlights- 【Product Size】: 266*170mm ; Thickness: 0.1mm
- 【High Transmittance】: 96.9% light transmittance which ensures high stability of UV lighting and won’t affect the printing result.
- 【Good Protection】:The screen protector can not only protect the screen from being scratched but can also prevent resin leakage from contaminating the screen due to damage to the release film.
- 【Better Adhesion】:Official ANYCUBIC screen protector has a perfect adhesion for screen.
- 【Application】:100% ANYCUBIC original parts,compatible with 10.1inch Resin 3D Printers.Works perfectly on Anycubic Photon MONO M5s&M5s Pro;NOT for Photon MONO M5.
9.0Excellent
View offer on:
Show more
6
HzdaDeveHzdaDeve 6PCS Screen Protector for Anycubic Photon Mono M5 10.1 Inch LCD Anti Scratch Protective Film for 3D Printer Accessories Replacement
Main highlights- This screen protector is compatible with Anycubic Photon Mono M5 SLA Resin 3D Printer
- Thickness: 0,125mm. Please level the printer after installing the film, then it'll have good result.
- The screen protector can not only protect the screen from scratches, but also prevent leaking resin from contaminating the screen due to damage to the release film.
- The foils are very easy to stick on the display and are very light permeable so that they have no disadvantage when they are glued
- 95% light transmittance, which ensures high stability of UV lighting and does not affect the print result.
8.9Very Good
View offer on:
Show more
7
KOYOFEIKOYOFEI 5PCS Screen Protector for LCD Resin 3D Printers, Screen Protective Film for Elegoo Saturn, Photon Mono X, Voxelab Proxima 8.9 inch Monochrome LCD Resin 3D Printers
Main highlights- Screen Protector: 8.9-inch screen protector can just cover the LCD screen of the 8.9 inch resin 3D printers, preventing the resin from contaminating the screen when FEP film damaged, adding or recycling resin, thereby prolonging the use time of the LCD screen and saving the cost of replacing the screen.
- Light transmittance of more than 95%: The light transmittance of the 8.9 screen protective film is above 95%, which will not affect the 405nm wavelength of ultraviolet rays through the protective film and curing the resin, which can maintain the printing accuracy of the 3D printer.
- Included tool kit: This kit comes with a tool kit for easy installation of the protective film, you can refer to the installation steps in the picture to operate, and use the scraper to avoid air bubbles during the installation process.
- High quality screen protectior: Screen Protector is made of high-quality PET material imported from Japan. The double-sided lamination ensures that it will not be scratched before use, and the edge will not produce white edges after being posted. Therefore, it will not affect the print volume after installation, and only needs to be re-leveled.
- Compatible Models: Protective film compatible with Elegoo Saturn, Photon Mono X, Voxelab Proxima 8.9 and etc 8.9 4K Monochrome LCD Resin 3D Printers.
8.8Very Good
View offer on:
Show more
8
ANYCUBICANYCUBIC Screen Protector for Photon Mono X 6Ks, 9.1 Inches Anti Scratch Film, 5pcs
Main highlights- Protect LCD screen, the anti scratch film can effectively prevent damage to the LCD screen caused by resin leakage or resin curing directly above the screen, and also prevent screen scratches during the movement of the resin tank
- Packaging information, this package provides 5 anti scratch films and comes with the same number of auxiliary sets, which are perfectly suitable for Anycubic Photon Mono X 6Ks
- Installation, install in a clean environment, please use the auxiliary set to clean the LCD screen before Installation. A certain amount of bubbles will appear during installation, and stuff like plastic shovels can be used to push away the bubbles. As long as there are no bubbles on the screen position, it will not affect printing
8.5Good
View offer on:
Show more
9
KOYOFEIKOYOFEI 5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Anycubic Photon Mono 2 6.6inch 4K Resin 3D Printer
Main highlights- Screen Protector: Screen protector can prevent the resin from contaminating the screen when FEP damaged, and prolong the use time of the LCD screen and saving the cost of replacing the screen.
- Light transmittance of more than 95%: The light transmittance of the screen protective film is above 95%, which will not affect the 405nm wavelength of ultraviolet rays through the protective film and curing the resin, which can maintain the printing accuracy of the 3D printer.
- Included tool kit: This kit comes with a tool kit for easy installation of the protective film, you can refer to the installation steps in the picture to operate, and use the scraper to avoid air bubbles during the installation process.
- High quality screen protectior: Screen Protector is made of high-quality PET material imported from Japan. The double-sided protector films ensures that it will not be scratched before use, and the edge will not produce white edges after being posted. Therefore, it will not affect the print volume after installation, and only needs to be re-leveled.
- Compatible Models: Screen Protector is compatible with Anycubic Photon Mono 2 LCD Resin 3D Printer.
8.4Good
View offer on:
Show more
10
KOYOFEIKOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 9.25‘’ Resin 3D Printer, High Light Transmittance Protective Film for Anycubic Photon Mono X 6K, M3 Plus LCD Resin 3D Printer
Main highlights- With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also prevent the resin from leaking and polluting the screen from the damage of the release film.
- The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank through the tempered film.
- Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after installing the tempered film.
- Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective film and install the tempered film on the monochrome screen. Use a plastic scraper to avoid air bubbles. After the installation is completed, please use cleaning fluid and The non-woven fabric wipes the tempered film clean.
- Compatible Models: 9.25 inch tempered glass protective film is compatible with Anycubic Photon Mono 6k, M3 Plus. It comes with tool kit and manual, please read the introduction of the manual before installation.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for photon monox screen protector
