Pei Magnetic Beds of 2025
Best Choice1
CrealityCreality Ender 3 Max Neo Bed Upgrade, PEI Sheet 310 x 320mm Removable Magnetic Flexible Texture Surface Heated Bed Plate Build Surface for CR-10S PRO/CR-10 V2/ CR-10 V3/ CR-X/CR-X Pro/Ender-3 Max
Main highlights- 【Wide Application】Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 310*320mm spring steel sheet 3d printer bed works well with CR-10S PRO/ CR-10 V2/ CR-10 V3/ CR-X/ CR-X Pro/ CR-10S PRO V2/ Ender-3 Max/ Ender-3 Max Neo and other same-sized beds
- 【Simple Installation】Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker
- 【Quality assurance】100% Official Creality 3D printer PEI Sheet 310*320mm removable magnetic flexible Texture heated bed platform. Gold PEI surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear resistance, and good printing stability
- 【Great Adhesion & Easy Take Mold】Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- 【After Sales Support】We provide professional after-sales service. Please kindly contact us(seller) via "ask a question" find us directly cause our customer service will respond to you within 24 hours no matter what the question
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
CCTREECCTREE Double Sided Textured PEI Sheet+Smooth PEI Spring Steel Sheet 310x320mm, Flexible Print Build Plate Removable Surface Platform with Magnetic Bed for Creality Ender 3 Max/CR-10S Pro, Kobra Plus
Main highlights- 【Textured/Smooth Double-Sided PEI】:Our double-sided PEI flex plate features one powder-coated PEI surface that leaves a textured matte finish on your parts and one smooth PEI end that leaves a glossy, reflective finish on the bottom of your interests!
- 【Simple Installation】Stick the soft magnetic base to the heating bed of your 3D printer then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- 【Excellent Adhesion】: Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double-sided PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- 【Easy Removal】:his surface is easily removed and flexible. Prints come off the surface easily when the heated bed temperature reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- 【Compatibility】The size of PEI sheet is 310*320mm,It is suitable for Creality CR-10S Pro / V2 / V3, Ender 3 Max, AnyCubic Mega X and other 3D printers. If your 3D printer has a 310x320mm heat bed platform, This PEI sheet is compatible with your 3D printer.
9.6Exceptional
View offer on:
Show more
3
ComgrowComgrow PEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel 235x235mm for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/Ender 3 Neo/Adventurer 5M
Main highlights- WIDE APPLICATION - The PEI sheet 235x235 is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.
- HIGH RESSISTANCE-Our Ender 3 PEI build plate is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.
- ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.
9.5Excellent
View offer on:
Show more
4
UNIDO10% OffDouble-Sided Textured PEI Sheet 3D Printer Bed 235x235mm and Magnetic Sticker with Adhesive for Creality Ender 3 V3 KE/SE/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1-Pro/Ender 5-Pro
Main highlights- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender 3 V3 SE/KE, Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120°C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
9.3Excellent
View offer on:
Show more
5
Jusnboir3D Printer PEI Sheet Textured Build Plate Frosted Surface Mat Spring Steel Magnetic Flexible Heated Bed 310x310mm Platform for The CR-10, CR-10S, CR-10S pro, CR-10V2, CR-10 V3
Main highlights- Wide Application - The size of pei sheet 310x 310 mm, not warped. It is applicable with 3D printers like CR10/CR10S, X40 IDEX/X40 V2, KP5L, S8 Pro/Plus, TL-D3 Pro etc, please confirm your printer platform size before ordering. If your 3D printer with 310x310mm heat bed platform, then this PEI sheet is compatible with your 3D printer.
- Satisfaction Guarantee - As a specialized pei printing plate manufacturer, we promise that we will only supply quality products to customer. If you encounter any problem when using this pei plate, please contact us directly.
- Pei Build Plate - Our 3d printing plate can be placed on any existing magnetic base. It is resistant to 200℃ and the magnetic bottom sheet is not suitable for high temperature printing applications above 80℃. Compatible with PLA / PETG / PEEK / ABS and other filaments.
- Easy To Remove Model - This surface with excellent adhesion, easy to paste and remove, no glue or shovel required. When the build surface cools down to room temperature, models can be removed by slightly bending the steel plate.
- Double Sided Design - The Pei Foil consists of 2 parts, a flexible steel platform with double-textured Pei surface and a magnetic print bed with adhesive on the back. Simply stick the PEI magnetic sheet onto your heated bed, then place the steel platform with PEI coat on top.
9.2Excellent
View offer on:
Show more
6
HICTOPHICTOP PEI Sheet PEI Spring Steel 235x235 and Magnetic Build Plate with Adhesive PEI Bed for Flashforge Adventurer 5M/ 5M Pro,Ender-3 Pro/Neo,Ender-3 V2/Neo,Ender-3/Neo 3D Printers
Main highlights- 5 The size of HICTOP PEI sheet is 235*235mm（9.25*9.25inch）, it is applicable with Flashforge Adventurer 5M/5M Pro,Ender-3 Pro/Neo, Ender-3 V2/Neo，Ender-3/Neo, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and same sized machines.
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- 2 The Pei Spring Steel 235x235 is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed
- 1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied
9.1Excellent
View offer on:
Show more
7
CrealityOfficial Creality Ender 3 V3 SE Build Plate 235x235 mm Original Textured Bed Plate Magnetic Flexible Spring Steel Build Plate for Ender 3/Ender 3 V2/Ender 3 V3 KE/Ender 3 V3 SE/K1/K1C
Why we love it
Durable and wear-resistant build plate.
Ensures stable, warp-free prints.
Easy print removal with flexible design.
9.0Excellent
View offer on:
Show more
8
RETUXEPRETUXEP Double-Sided Textured PEI Sheet 235x235m,3D Printe Build Plate Spring Steel Print Bed (no Magnetic Base) for Creality K1/K1C/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender V3 KE/Ender3 V3 SE
Main highlights- 【Positioning Holes Design】Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- 【High Temperature Resistant】The PEI bed can be resistant to 260°C for the nozzle without deformation.
- 【Flexible and Easy to Remove】The PEI spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or bend the build plate and remove the prints. The print mat won’t be out of shape.
- 【Double Side Texture PEI】Both sides of the printing plate are frosted PEI coating, which can be used on both sides. The PEI coating is resistant to high temperatures and wear, and is easy to maintain and clean.
- 【Compatible Printer】235x235mm Double sided H1H surface spring steel sheet with 2 holes, compatible with Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 5 S1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/K1/K1C CR-20/ CR-20 Pro/ Voxelab Aquila/Voxelab Aquila C1/ Voxelab Aquila C2, and other similarly-sized FDM 3D printers.
8.8Very Good
View offer on:
Show more
9
ELEGOOELEGOO 235x235mm PEI Sheet Magnetic Build Plate, PEI Spring Steel Flexible Platform with Adhesive Bed for Neptune 3 Pro 3D Printer
Main highlights- Original Spare Part - ELEGOO flexible magnetic build plate with sprayed one-sided PEI coating, size 235x235mm/9.25“x9.25”
- High Compatibility - Not only compatible with ELEGOO Neptune 3 Pro, but also fit most FDM 3D printers with 235x235mm bed
- Excellent Adhesion - The powder-coated PEI plate is heat-resistant. It ensures great bed adhesion when printing and make prints not easy to warp
- Easy to Remove Prints - ELEGOO build plate is flexible enough to remove your prints simply by bending the plate without losing durability
- Easy to Install - only need to put the magnetic bottom sheet onto your heated bed. The steel platform with PEI surface is on the top. No more mess
8.7Very Good
View offer on:
Show more
10
ENOMAKER20% OffENOMAKER Ender 3 /Pro/V2/Neo PET PEI Build Plate,Magnetic Print Bed,Carbon Fiber Textured Double Sided Flexible Spring Steel Sheet for Creality Ender 5/S1,Elegoo Neptune 3 Pro 3D Printer 235x235mm
Main highlights- 【What you get】1 double-sided PET+PEI build plate, 1 magnetic base, and 24-hour after-sales service.
- 【Strong magnetic adhesion】The powerful magnetic stickers maintain their high magnetism even at high temperatures, ensuring printing stability.
- 【Precise Size, But Need to Remove Positioning Screws】To be compatible with Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 V3, K1, K1C, Ender 3 S1,Ender 3 S1 Pro,Ender 5 S1,CR 10 SE, suggest to remove the two positioning screws on the hotbed first.
- 【Perfectly Compatible】Bed sheet dimensions: 235x235mm, perfectly fit for Creality Ender 3, Ender-3S, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender 5, Ender-5S,Ender 5 pro,CR 20,CR 20 Pro,CP-01,ELEGOO Neptune 3 Pro and other similiar size platform.
- 【Double Sided PET PEI Ender 3 Build Plate】Both the PET carbon fiber and golden PEI surface feature high-adhesion textures to prevent warping, with PET carbon fiber also offering a unique texture on the model’s bottom surface.
- 【Bend to Remove Models】The selected spring steel bed plate features high flatness and elasticity, ensuring easy model removal and resistance to deformation, even after repeated bending. No tape, glue, or shovel is needed, reducing printing anxiety.
- 【 High-temperature compatibility】PET ≤ 120℃, recommended for printing PLA, PETG, and TPU. PEI ≤ 300℃, recommended for printing PLA, ABS, ASA, PETG, TPU, PC, PA, etc. Magnetic base ≤ 110℃.
8.5Good
View offer on:
Show more
Similar products on Amazon
