Pei 350mm Heatbeds of 2025
Best Choice1
wewey180/220/235/300/310/350/257/210/250mm 3D Printer Build Plate, Double Side PEI Coated Fiexble Magnetic Bed, Heatbed PEI Sheet(350x350mm)
Main highlights- The contents of this order include 1 piece of double-sided PEI sheet, the sheet size rely on your option
- The Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC
- Safety curved corners, matte texture easy to print
- Premium Quality PEI Coating: The PEI sheet is made of high temperature resistant PEI coating on the outside, high abrasion resistance and high strength frosted texture, the PEI build outside is not easy to scratch
- Easy to dismantle: This outside with excellent adhesion, easy to paste and dismantle, no glue or shovel required. When the build outside cools down to room temperature, models can be removed by slightly bending the steel plate
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
LANGshawLANGshaw 3D Printer Hotbed Textured PEI Sheet Removal Spring Steel Plate Magnetic Base Heatbed Flexibl Sticker 350/310/235/220/180mm (Size : 350x350mm)
Main highlights- Suits variety of filaments especially for PLA
- Never warp
- Free clean- just flex the plate a little then take the prints off after cooled
- Flexible Removable stick to magnets very well
- Easy to get the first layer even for a new user
9.4Excellent
View offer on:
Show more
3
IdeaFormer IR3IdeaFormer 350x350mm Double Sided Printing Smooth Carbon Fiber PET + Coated Textured PEI Flexible Build Surface Sheet Heatbed for FYSETC Voron2.4 Size 3D Printer (with Magnetic Base)
Main highlights- 【PET+PEI Build Plate Design + Magnetic Build Plate Base】The PET+PEI build plate is double sided coating. One side is a smooth PET coating, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping. There is Magnetic Sticker Base.
- 【High Resistance】The PET print bed surface is resistant to high temperature 120℃ and the PEI coating is 260℃.
- 【Compatible Filaments】PET build surface only prints PLA filament; PEI surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon.
- 【Attention】Our double-sided textured PEI+PET printing plate fits for 3D printer with 350x350mm platform size.Please confirm your printer platform size before ordering.
- 【After-Service】If you have any further questions, please read our Q&A or send us an email. Our service staff and technicians will be happy to help you.
9.3Excellent
View offer on:
Show more
4
FYSETCFYSETC Voron2.4 350mm Build Plate - Smooth PEI Textured Print Surface - Double Sided PEI Sheet: Flexible Removable Magentic Heated Bed 355x355mm with Soft Bottom Base for voron2.4 v2 3D Printer Parts
Main highlights- 5. 355 build plate: The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 4. 355mmx355mm pei bed: Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or glue stick. Kindly note printing ABS needs a thermal insulation environment
- 3. 355mm pei plate: smooth pei, Easy to use, simply stick the sticker bottom sheet onto your heated bed, then place the steel platform on the top. Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no need worry about bubbles. Please peel off the profective film on it before using
- 2. 355x355 build plate: Flexible, removable, can stick to sticker very well. High strength and heat resistance, apply to the same size Vorn 2.4 printer--350 V2, Sovl SV03 (Please measure your build plate before ordering,not rely on bulid volume)
- 1. A upgrade Replacement printing platform JanusBPS-Build Plate 355mmx355mm pei sheet. This JanusBPS kit is a side with Gold Powder, another with a Smooth PEI, comes with a soft sticker base with strong adhesive
9.2Excellent
View offer on:
Show more
5
weweySingle-Sided Print Build Plate, 3D Printer PEI Fiexble Magnetic Bed, Heatbed PEI Spring Steel Sheet 180/235/310/350mm(350x350mm)
Main highlights- This spring steel sheet is flat, flexible, stainless stick to magnets very well
- This order consists of 1 piece of PEI Sheet, the size as you choose
- It's simple and makes the print removal process much easier
- Fast heater performance, less waiting time after printing
- Advantages: longlasting and not easy to scratch, stronger adhesion
9.0Excellent
View offer on:
Show more
6
QWERTYUIQWERTYUI AISHANBAIHUODIAN 3D Printer Heatbed Hot Bed PEI Sticker Removal Spring Steel Sheet Pre-Applied PEI Flex Magnetic Base Fit for KP3S Ender 3 (Size : 350x350mm)
Main highlights- Suits variety of filaments, especially for PLA
- Free clean- just flex the plate a little then take the prints off after cooled
- Flexible Removable, stick to magnets very well
- Fast heater performance, less waiting time after printing.
- Easy to get the first layer even for a new user
8.9Very Good
View offer on:
Show more
7
AgatigePEI Sheet Magnetic Flexible Heated Bed 3D Printer Bed 350x 350mm PEO Rhinestone Pattern PEI Texture Dual Magnetic Spring Steel Build Plate for
Main highlights- Wide Application: PEO build plate surface can be printed with PLA and TPU and PETG. If you print other materials, you need glue. PEI surface plate can print most filaments such as PLA, ABS, PETG, TPU, Nylon.
- Good Compatibility: Double sided sleek PEO and textured PEI print bed is suitable for 350D printers with a platform size of 3x350mm, for voron and other models. If you have any questions, please to contact us. We will respond within 24 hours.
- Good Adhesion: Magnetic spring steel plate has good adhesion and the model can be firmly attached to the surface of the print bed. After many inspections before leaving the factory, you can use it with confidence.
- Flexible And Easy To Remove: Magnetic spring steel plate is flexible and makes it easy to manually remove the print once the build surface has cooled, or bend the build plate and remove the print. The print plate will not deform.
- Dual Sided Printing: Magnetic spring steel sheet is a dual sided PEO and PEI spring steel sheet with a sleek rhinestone type printing surface on one side with an upgraded PEO film. The other side is a frosted PEI surface, giving the frosted decal surface a unique frosted touch, providing greater adhesion and printing without warping.
8.7Very Good
View offer on:
Show more
8
YunirPEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel 350x 350mm, Sided Printing, Good Adhesion, PEO Rhinestone Pattern Printed with PLA, TPU and PETG, for Voron, Ect
Main highlights- Wide Application: PEO build plate can be printed with PLA and TPU and PETG. If you print other materials, you need glue. PEI plate can print most filaments such as PLA, ABS, PETG, TPU, Nylon.
- Sided Printing: This magnetic spring steel sheet is a sided PEO and PEI spring steel sheet with a sleek rhinestone type printing on one side with an upgraded PEO film. The other side is a frosted PEI surface, giving the frosted decal a unique frosted touch, providing greater adhesion and printing without warping.
- Good Compatibility: This double sided sleek PEO and textured PEI print bed is suitable for 350D printers with a size of 3x350mm, for voron and other .
- Good Adhesion: This magnetic spring steel plate has good adhesion and the model can be firmly attached to the of the print bed.
- Flexible And Easy To Remove: This magnetic spring steel plate is flexible and makes it easy to manually remove the print once the build has cooled, or bend the build plate and remove the print. The print plate will not deform.
8.4Good
View offer on:
Show more
9
Generic3D Printer Double Sided Textured Black PEI Powder Coated Spring Steel Magnetic Build Plate 120/250/300/350mm(with Base,250x250mm)
Main highlights- Size : 120/250/300/350/355mm
- Product : double side textured pei steel plate ,Black
- Model Number : V-120-1
- Application : 3D printer heated bed
8.3Good
View offer on:
Show more
10
FAUOSWUK3D Printer Bed, 350x 350mm Flexible PEO PEI Print Bed PlateDual Magnetic Spring Steel Build Plate Spring Steel Plate Printing and Rubber Sheet
Main highlights- WIDE APPLICATION: This versatile build plate outer is compatible with a variety of filaments, including PLA, TPU, and PETG with PEO, while the textured PEI outer accommodates most materials such as PLA, ABS, PETG, TPU, and Nylon. For optimal results with other filaments, slight adhesive assistance is suggested, broadening the scope of materials you can use.
- SNAP DESIGN FOR EASY WEARING: The chin strap features a single strengthened snap design that allows for quick and easy adjustments based on individual face shape. This ensures a snug and secure fit, minimizing distractions during play. With its user-friendly design, players can effortlessly put on or remove the strap as needed, enhancing the overall comfort of their helmet.
- GOOD COMPATIBILITY: Tailored for use in 3D printers like the 350D with a size of 350mm x 350mm, this double-sided portable printing bed suits various model including Its robust construction and compatibility with multiple printer setups allow for a seamless fit into your existing 3D printing system, enhancing your creative capabilities.
- GOOD ADHESION: Designed for superior performance, this magnetic spring steel plate ensures excellent adhesion, allowing printed model to securely attach to the build outer. This strong bonding helps prevent slipping during the printing process, ensuring that your creations come out accurately and consistently, reducing the chances of failed prints.
- 2 SIDED PRINTING: This magnetic spring steel plate adopts 2 sided design, one side is smooth rhinestone type printed outer layer, one side is upgraded PEO film, and the other side is frosted PEI outer layer. The unique frosted touch can enhance adhesion and printing quality while minimizing warping, making it an ideal choice for various 3D printing projects.
8.0Good
View offer on:
Show more
Similar products on Amazon
