10 Best Pcb Keyboard Gh60 Usb C In The Us - Black Friday 2024
Best Choice1
YMDKYMDK GH60 GK61 RGB Hot Swap Independent Driver Tyce-C ANSI Mechanical Keyboard DIY kit Plastic Case CNC Aluminum Case Plate PCB (Plastic White GK61X Wired)
Main highlights- There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.
- The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB.
- Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.
- Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool
- PCB has RGB presoldered,it's under per switch.PCB RGB can support by music.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Guffercty kredGuffercty kred GK61X PCB Plate Case 60% Keyboard Custom Hot Swappable RGB Keyboard DIY Kit Wired Tyce-C for 3/5 Pin Switch (GK61X White)
Main highlights- Wide Compatibility. Compatible with Cherry MX RGB switches, Kailh switches and Gateron RGB switches
- RGB Backlight. GK61X is equipped with RGB SMD light. More than 16.8 million lights are available. It’s more than a keyboard but also a fun toy
- Hot swappable. Customize the keyboard with ease thanks to hot-swappable switch sockets, which allow you to swap switches in seconds—no soldering required.
- Fully Programmable. Fully customizable RGB backlighting and under-lighting. Set your millions of LEDs to a single color or light them up with custom rainbow wave patterns.
- All-in-One Kit. GK61X got all you need for a custom keyboard: PCB, mounting plate, black ABS case, stabilizers, Type-C cable
9.6Exceptional
View offer on:
Show more
3
YMDKYMDK GH60 64 Minila PCB Type C Fully Programmable QMK VIA for DIY Mechanical Keyboard Poker Faceu HHKB Support LED (Black QMK No Underglow)
Main highlights- QMK PCB is programmed with QMK firmware.Can find manuals link in detail page
- Package included: 1x Black QMK Type C Connector PCB,no underglow RGB
- New edition support all 61 64 layout as the image show,you need to use the plate which support these layout at the same time to support the layout you prefer.
- It supports most 61 64 Minila layout.Can see the image for all supported layout
- All resistors chipset is presoldered.However it's not hotswap,you need solder switches on yourself
9.5Excellent
View offer on:
Show more
4
YMDKYMDK GK61 GK61X RGB Hot Swap Independent Driver Wired Tyce-C ANSI PCB (GK61X PCB)
Main highlights- You can prepare GH60 size case plate to use together.This PCB can only use with plate mounted stabilizers.
- This PCB add connector for underglow RGB stripe now.You can buy and plug GK led stripe in directly
- GK61xs support 6.25u space as well as split 2.25u 2.75u space layout.You can prepare GH60 size case plate to use together
- GK61x PCB is new 61 Wired PCB with switch RGB and Type C connector
9.4Excellent
View offer on:
Show more
5
YMDKYMDK Universal Anodized Aluminum Plate Positioning Board Plate Support ISO ANSI for GH60 PCB 60% Keyboard DIY
Main highlights- This plate support switch top removal to replace springs
- This plate can be used with GH60 case PCB,such as DZ60,YD60,XD60,Satan etc.Layout supported as the image shown
- This new plate can support most GH60 layout and can support ISO and ANSI as well.It uses PCB-Mounted stabilizers
- This aluminum plate surface is sand blast and then anodized
- If you receive wrong color or wrong item,just message us directly for replacement or refunds is ok
- If you choose to add PCB stabilizers,there will be 1x6.25u+4x2u OEM PCB stabilizers included
9.2Excellent
View offer on:
Show more
6
KPREPUBLICKPREPUBLIC bm60rgb bm60 Poker RGB 60% gh60 hot swappable Custom Mechanical Keyboard PCB Program qmk Full RGB Switch underglow Type c (BM Poker PCB Only x1)
Main highlights- Fully programmable PCB(QMK supported)
- Full hot swappable switch sockets
- Full RGB switches Leds(With kinds of LED effects)
- 61 keys
- 6 bottom RGB underglow leds(pre-soldered)
9.1Excellent
View offer on:
Show more
7
YMDKWholesales GH60 64 Anodized Aluminum CNC Case for GK64 DZ60 Type C GK61 Idobo 75 ID75 XD75
Main highlights- This link is only aluminum case which CNC Anodized.CNC Feet Included
- This case support xd75 ID75 PCB
- New Type PCB GK64x GK64xs GK61x GK61xs support as well.Just need a GH60 plate is ok.
- Compatible with GK64 GK61 PCB,GK61 64 Plate need to replace with gh60 plate
9.0Excellent
View offer on:
Show more
8
KPREPUBLICKPREPUBLIC bm60ec bm60 EC RGB 60% gh60 hot swappable Custom Mechanical Keyboard PCB Programmed qmk VIA RGB Switch Type c Rotary Knob (BM60 EC PCB Only x1)
Main highlights- 9All components of the board have been pre-soldered so the PCB is ready for key switches and LEDs
- 8MX Stem support
- 7Standard ICSP interface
- 6 bottom RGB underglow leds(pre-soldered)
- 5Full RGB switches Leds(With kinds of LED effects)
- 4Full hot swappable switch sockets
- 3Fully programmable PCB(QMK and VIA supported)
- 2Supports offline flash app
- 1More than 60 keys
- 10Type C port
8.9Very Good
View offer on:
Show more
9
PerixxPerixx PERIBOARD-213C Wired Silent USB-C Scissor Keyboard - 14.45x4.76x0.71 Inches Compact Design with Number Pad - Black - US English
Main highlights- TYPE C CONNECTION: The keyboard comes with a model type-c connection without an adapter. QUIET SCISSOR KEYS - Scissor key switch that provides a stable key press for comfortable typing, so you don't have to disturb those around you
- SYSTEM REQUIREMENTS - Windows 7, 8, 10, and Windows 11; Package content: keyboard and manual
- SHORTCUT AND MULTIMEDIA KEYS - 13 hotkeys that let you conveniently control your media, access email, browser, and favorites by pressing the Fn-key combined with the F1-F12
- MODERN CHICLET KEYS - The stylish chiclet keys design can provide extra space between each key to avoid mistyping; Keyboard Dimension: 14.45x4.76x0.71 Inches (367x121x18mm)
- BEAUTIFUL AND SLIM DESIGN - Thin profile keyboard with integrated number pad that saves desk space without missing functions from a full-size keyboard; dimensions: 14.45 x 4.76 x 0.71 inches
8.7Very Good
View offer on:
Show more
10
GTSPGTSP 75% Custom Barebones Keyboard kit Gasket Mouted，Blank DIY Silent TKL Mechanical Gaming Keyboard PCB Hot Swappable 3pin/5pin Switch with South-Facing RGB for Win/Mac (M87 Kit-Black)
Main highlights- 【Sound Absorption Foam&Silicon Bottom Pad】To ensure a whisper-quiet typing experience, the M75pro equipped with high-quality silencing pads, absorbing the clatter of keystrokes without sacrificing responsiveness. Each press feels like a symphony of comfort and precision, allowing you to immerse yourself fully in your work or gaming sessions
- 【Software Customization】Up to 18 factory-set lights and music rhythm modes are free to choose from the keyboard. Custom software is also available for designing your new effects. Build macros, and set up per-key lighting and effects.
- 【Hot-Swappable Switch-Compatible with 3Pin/5Pin Switch】Equipped with hot swappable terminals, you could install the MX switches directly without soldering, easily build up your own mechanical keyboard. Support NKRO. Supports both 3 pin or 5 pin switches, such as Cherry, Otemu, Gateron, Kailh and other MX switches and its clones.
- 【Compatible with Windows and Mac Systems】Full keys anti-ghosting bring you more smooth gaming experience. Detachable USB-C keyboard cable make the 75% gaming keyboard more portable and customized
- 【A Fascinating Mechanical Keyboard Kit】The M87pro is an elegantly, simple but such a functional RGB mechanical keyboard kit for any one who is looking for something new and want to try customization. Every key is thoughtfully positioned to provide effortless access, allowing you to navigate your digital realm with ease and precision
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for pcb keyboard gh60 usb c
