10 Best Oxygen Sensor Socket In The Us - Black Friday 2024
ARES 70318-10-Piece Oxygen Sensor Socket Set - Set Includes Thread Chasers, Oxygen Sensor Sockets, an Injector Socket and Oil Sending Unit Sockets - High Strength Chrome Vanadium Steel
Main highlights- STORAGE: This Oxygen Sensor Socket set comes complete with convenient storage case so you'll never misplace a socket on the job again!
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Oxygen Sensor Socket Set, simply contact customer service for troubleshooting help, parts, replacement, or refund."
- QUALITY: All tools in this 10-piece Oxygen Sensor Socket Set are constructed of high strength Chrome Vanadium Steel with a Manganese Phosphate coating to resist corrosion."
- INCLUDES: This set includes a 29mm 1/2-inch drive Vacuum Switch Socket, 27mm 1/2-inch drive Injector Socket, 27mm 3/8-inch drive Oil Sender Unit 1-inch Socket, 22mm 3/8-inch drive Vacuum Switch Socket, 22mm 1/2-inch drive Heated O2 Sensor Socket, 27mm 3/8-inch drive Oil Sender Unit 1-1/16-inch Socket, 22mm 3/8-inch drive 6-Pt Offset O2 Sensor Wrench, M12 x 1.25mm and M18 x 1.5mm O2 Sensor Rethread Tools, and a 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket."
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DAYUAN10Pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Removal Kit
9.9 worth the money9.7 Simple to use9.3 Durability9.6Exceptional
View offer on:
Show more
3
DURATECH15% OffDURATECH 5PCS O2 Oxygen Sensor Socket Thread Chaser Set, 3/8" 1/2" Drive x 7/8" 22mm Oxygen Sensor Wrench Remover O2 Sensor Removal Tool Kit
Main highlights- Wide Application: This O2 sensor remover set is suitable for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines. As an important auto accessory, it is easy to use, convenient and practical, which can save your time and energy
- Special Design: The wire gate of each O2 sensor removal tool is wide enough to pass through the wire without damaging it, which is both convenient and safe. And the square hole of this socket has a unique slotted design. These small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the tool
- Premium Material: The oxygen sensor remover set is made of high-quality alloy steel, meets and exceeds ANSI/ASME standards. It has surface phosphating and heat treatment to improve material performance and make it more durable
- O2 Sensor Socket Set: The package includes 1PC 1/2" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) long oxygen sensor socket, 1PC M12 x 1.25mm thread chaser and 1PC M18 x 1.5mm thread chaser
- 2 Thread Chasers: The M12-1.25" and M18-1.5" thread chasers can be used with a 3/8" ratchet. This kind of tool is designed to re-tap threads, clean and repair damaged threads, remove rust and prevent future cross-threading
9.5Excellent
View offer on:
Show more
4
A ABIGAILA ABIGAIL 5 PCS Automotive O2 Oxygen Sensor Socket Offset 02 sensor Wrench Remover Tool and Thread Chaser Tool
9.5 worth the money9.3 Simple to use9.1 lasts a long timeWhy we love it
Easy to use, even for beginners.
Durable materials ensure long-lasting performance.
Versatile kit covers various sensor sizes.
9.3Excellent
View offer on:
Show more
5
vector tools5Pc Set Oxygen Sensor Socket Wrench and Thread Chaser Set
Main highlights- Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires
- Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines
- 3 Different types of sockets cover various situations of oxygen sensor locations
9.1Excellent
View offer on:
Show more
6
TEKTONTEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749, Original Version
Main highlights- Use with any 3/8 inch drive ratchet or breaker bar
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
- High-performance chrome molybdenum steel construction
- High-contrast, permanent, laser etched size markings are easy-to-read, even in low light
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
8.9Very Good
View offer on:
Show more
7
ITEQITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set
Main highlights- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
8.7Very Good
View offer on:
Show more
8
A ABIGAIL7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool
Main highlights- 【USE】 Built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- 【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut.
- 【Service】100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- 【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.
- 【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
8.6Very Good
View offer on:
Show more
9
GOHAWKTEQ10% OffGOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs
9.9 Durability9.7 materials Quality9.5 Simple to useWhy we love it
Durable and high-strength steel construction.
Comes with a variety of essential tools.
Special design prevents wire damage.
8.5Good
View offer on:
Show more
10
QziulrZlirfy 5PCS Oxygen Sensor Removers,Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set,O2 Oxygen Sensor Socket Set for Removing and Install Oxygen Sensors,Hex Vacuum Switches
Main highlights- [Package Includes] 1 piece of 3/8 "Dr. ultra deep drawing knife socket (3-1/8" long), 1 piece of 3/8 "Dr. thin crowbar socket wrench (1-1/4" long), 1 piece of 1/2 "Dr. offset crowbar socket wrench (1-15/16" long), and 1 piece of M18 x 1.5mm and 1 piece of M12 x 1.25mm threaded groove with 3/8 "driver for cleaning and repairing damaged threads.
- [High Quality Material] Made of high-strength chromium vanadium steel. Please rest assured that our products are sturdy enough to install and remove oxygen sensors. The outer layer is protected from oxidation and rust through phosphating and electroplating, extending its service life.
- [Features] Special side cut design allows for easy access to the oxygen sensor from any part and prevents damage to the wires.
- [Convenient Storage] The disassembly tool for the automotive oxygen sensor socket wrench is equipped with a storage box, which can protect the tool well during transportation and allow you to keep the tool well after use.
- [Applicable] The oxygen sensor sleeve kit is perfect for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for oxygen sensor socket
