10 Best Optical Sensors In The Us - Black Friday 2024
Best Choice1
Heechoo2Pcs Optical Sensor TRANSMISSIVE/Slotted Interrupter Limit Switch EE-SX674 for Linear Rail Guide Actuator
Main highlights- Working voltage 5-24v wide voltage start
- With 1m flexible link cable
- Small size and easy installation
- 1KHz High response frequency
- 100% Matches Heechoo Linear Guide Rails
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
GenericMicoAir OPTICAL FLOW & LIDAR SENSOR MTF-01 Compatible with Ardupilot/PX4/INAV (INAV)
Main highlights- Lightweight Design, Strong Environmental Adaptability: Weighing only 4.5g and measuring 29 * 16.5 * 15mm, it supports operating voltages of 4.0-5.5V and working temperatures from -10°C to 60°C, adaptable to a variety of environments.
- Integrated High-Performance Sensors: Incorporates a PMW3901 optical flow sensor and a high-power TOF sensor, suitable for outdoor sunlight environments. It offers a ranging distance of 0.02-8m with 2% accuracy and effectively resists up to 70K Lux of ambient light.
- High Compatibility: The MTF-01 supports data output via uart, compatible with mainstream open-source flight control systems such as Ardupilot, PX4, and INAV. Users can switch communication protocols through the USB to UART TTL module, adapting to different flight control systems.
- Easy to Operate: Comes with comprehensive video tutorials that simplify the configuration process for quick and easy setup.
9.7Exceptional
View offer on:
Show more
3
Teyleten RobotTeyleten Robot IR Infrared Slotted Optical Optocoupler Module Speed Measuring Sensor 3.3V to 5V Photo Interrupter Sensor for Arduino 10pcs
Main highlights- use: 1. +5 +5 is the positive input port of the power supply, which can be connected to a voltage of 3.3V~5V
- Note: For Arduino players should set the MCU's I/O port to input mode/receive mode, otherwise it cannot be used.
- For other main control boards or higher-level main control boards (such as Arm), if you need to set the I/O port to input/output mode, you must set it to input mode/receive mode, otherwise it cannot be used. 51 series MCU can be used directly, no need to set input and output mode
- 2. GND GND is the negative input port of the power supply. OUT OUT is the signal output port, which is connected to the I/O port of the single-chip microcomputer. Generally, it is connected to an external interrupt.
9.6Exceptional
View offer on:
Show more
4
Taidacent20% OffTaidacent FS IR02 FS-IR02 Optical Infrared Water Liquid Level Sensor Stainless Steel Tank Wired Water Leak Detector
Main highlights- There is no friction and mechanical moving parts, so the reliability is high. However, the existing float type liquid level switch floats are easily stuck and cause defects
- The liquid level switch can be installed upside, downside, sideways and diagonally, while the existing float type liquid level switch can only be installed upside down.
- The liquid level control accuracy of this liquid level switch is high, within ±0.5mm, while the existing float type liquid level switch has an accuracy of ±3.0mm or even higher.
- Photoelectric level switch
- Application:Humidifiers, air-conditioning fans, steam and other electrical products that require water level control and protection
9.5Excellent
View offer on:
Show more
5
TaissTaiss/1 Pair photoelectric Switch 0-20M Through-Beam Reflection Optical Photoelectric Beam Sensor NPN NO photoelectric Sensor Switch 6-36V Proximity Switch with Infrared Ray Beam E3F-20DNL-Z-12MM
9.3 Easy installation8.7 Durability8.2 PrecisionWhy we love it
Weatherproof construction for versatile indoor/outdoor use.
Easy installation with included mounting brackets.
Affordable yet high-quality performance.
9.3Excellent
View offer on:
Show more
6
DWEIIDWEII 7PCS IR Infrared Slotted Optical Optocoupler Module Speed Measuring Sensor 3.3V to 5V Photo Interrupter Sensor for Arduino
Main highlights- ❃❃Signal output indicator (while breaking the beam, outputs low level, the indicator lights up)
- ❃❃Power: 3.3V to 5V
- ❃❃Note: For Arduino players should set the MCU's I/O port to input mode/receive mode, otherwise it cannot be used.
- ❃❃GND GND is the negative input port of the power supply. OUT OUT is the signal output port, which is connected to the I/O port of the single-chip microcomputer. Generally, it is connected to an external interrupt.
- ❃❃Application：The use of slot-type photoelectric, as long as the non-transparent objects through the slot can trigger the output 5V TTL level. Schmitt trigger to use the trembling pulse, very stable, can be used for small car measuring speed, distance measurement and so on!
9.1Excellent
View offer on:
Show more
7
uxcelluxcell 5pcs RPR220 Photoelectric Switch Reflective Optical Coupling Sensor 4 Pin
Main highlights- Total Size:22.8 x 4.9 x 6.3mm/0.9'' x 0.19'' x 0.25'' (L*W*H)
- The transmitter is a gallium arsenide infrared light emitting diode, and receiver is a high sensitivity, silicon plane photoelectric triode.
- RPR220 is a kind of integration reflection type photoelectric detector.
- Package Content : 5pcs x Optical Sensor Switch
- Detection Distance：1-13mm
9.0Excellent
View offer on:
Show more
8
Taiss18% OffTaiss photoelectric Sensor 30cm Adjustable M18 Diffuse Reflection photoelectric Switch Sensor Optical Three Lines PNP NO（Normally Open）Proximity Switch 6-36VDC E3F-DS30P1
Main highlights- Wire Type : DC 3 Wire, Proximity-sensing / Diffuse Type;Type : PNP NO ;Voltage : DC 6-36V
- Product Name : Photoelectric Switch;Sending Light : Infrared Rays;Model :E3F-DS30P1
- Current : 300mA;Sensory Distance : 30cm;Head Diameter : 1.6cm/0.6'' ; Thread diameter: 18mm
- Cable Length : 120cm/47'';Weight : 55g;Package Content : 1 x Photoelectric Switch
- Body Size : 2.3 x 7cm/0.9" x 2.7'' (Max.D*L);Material : Plastic, Alloy;Color : Black, Orange
8.8Very Good
View offer on:
Show more
9
JESSINIEJESSINIE PMW3901 Optical Flow Sensor Module XY Translation 3.3V 9mA Current Sensor Module Motion Detector CJMCU-3901
Main highlights- Wide working range from 80 mm to infinity
- Suitable for Devices that require far field motion detection, e.g Drone or Indoor and outdoor X-Y positioning especially in GPS denied environment
- No lens focusing required during lens mounting process, Power consumption of 9 mA @ run mode
- Module power supply voltage: 3.3V, Power consumption: operation mode 9mA, Working environment temperature: 0°C ~ 40°C, Illumination: ≥ 100Lux, Z-axis working range: ∞ ≥ Z ≥ 80mm, Effective viewing angle: 40°, Speed: ≤ 7.4rad/s, Communication interface: 4-wire SPI @ 2MHz
- 16-bits motion data registers, Motion detect pin output, Internal oscillator - no clock input needed
8.7Very Good
View offer on:
Show more
10
TaissTaiss/ 1 Pair Photoelectric Sensor M18 Infrared Ray Through-Beam Reflection Optical Photoelectric Switch Sensor NPN NO 6-36VDC Proximity Switch Inductive Distance 5M with mounting Bracket E3F-5DN1
Main highlights- Wire Type : DC 3 Wire, Proximity-sensing / Opposite Type;Type : NPN NO ;Voltage : DC 6-36V
- Product Name : Photoelectric Switch;Sending Light : Infrared Rays;Model :E3F-5DN1
- Current : 300mA;Sensory Distance : 5m;Head Diameter : 1.6cm/0.6'' ; Thread diameter: 18mm
- Cable Length : 120cm/47'';Weight : 110g;Package Content : 1 Pair x Photoelectric Switch + 2 x mounting bracket
- Body Size : 2.3 x 7cm/0.9" x 2.7'' (Max.D*L);Material : Plastic, Alloy;Color : Black, Orange
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for optical sensors
