10 Best Oled Display Raspberry Pi In The Us
Best Choice1
waveshareWaveshare 1.51inch Transparent OLED 128×64 Resolution Compatible with Raspberry Pi 4B/3B+/3A+ Embedded Independent Driver Chip SPI/I2C Interfaces Light Blue Color Display
Main highlights- The program defaults to SPI mode. If you need to switch the mode, please modify DEV_Config.h. For details, please refer to the program description - bottom hardware interface - interface selection.
- Provide online user manual, please check the manual carefully before using!
- OLED transparent module, full viewing angle
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
- Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
wavesharewaveshare 1.27inch RGB OLED Display Module, 128x96 Pixels 262K Colors OLED Display,Compatible with Raspberry Pi/Arduino/STM32,SSD1351 Driver,SPI Interface
Main highlights- SPI interface, minimizes required IO pins
- Embedded SSD1351 Driver Chip
- Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
- 262K colors, clear and colorful displaying effect
- 128×96 Resolution 1.27inch RGB OLED Display Module
9.7Exceptional
View offer on:
Show more
3
wavesharewaveshare 1.5inch RGB OLED Display Module for Raspberry Pi/Jetson Nano/Arduino/STM32, 128x128 Pixels,16-bit High Color (65K Colors) SPI Interface
Main highlights- Viewing angle: >160°. Operating voltage: 3.3V / 5V. Dimension: 44.5 x 37 (mm).
- This is a general 1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color (65K colors),clearly displays colorful images, with embedded controller, communicating via SPI interface.
- Driver: 1351. Interface: 4-wire SPI, 3-wire SPI. Display color: RGB, 65K colors. Resolution: 128x128.
- 128x128 high resolution, 65K colors, clearly displays colorful images. Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor.
9.5Excellent
View offer on:
Show more
4
iPistBitiPistBit 5 Pcs 0.91 Inch I2C OLED Display Module, 128x32 Pixel SSD1306 Luminous OLED Screen Board Compatible with Arduino Raspberry Pi ESP32 (Blue)
Main highlights- The module pins are soldered and housed in a small bag to prevent them from falling off during transportation.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module, users can create fonts using font generation software.
- 0.91 inch OLED display with a resolution of 128 x 32 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.06W when the screen is fully lit.
9.4Excellent
View offer on:
Show more
5
wavesharewaveshare 2.42inch OLED Display Module 128×64 Resolution for Raspberry Pi/forArduino/STM32/ESP32/Jetson Nano, with SSD1309 Driver Chip SPI / I2C Communication 3.3V / 5V, White Display Color
Main highlights- Ultra-narrow bezel, conpact size, with onboard voltage translator
- Compatible with Raspberry Pi, Arduino, STM32, ESP32, Jetson Nano, etc. Comes with online development resources.
- Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
- 3.3V / 5V Operating voltage; 4-wire SPI (default) / I2C Communication Interface
- 2.42inch OLED Display Module, Embedded SSD1309 driver chip, SPI / I2C Communicatio, White Display Color
9.3Excellent
View offer on:
Show more
6
HosyondHosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
9.1Excellent
View offer on:
Show more
7
XYGStudyXYGStudy 2.23 inch OLED Display HAT for Raspberry Pi 2B/3B/4B/Zero/Zero W Jetson Nano 128×32 Pixels SPI/I2C Interface
Main highlights- Trying to add a control interface for your Pi? This compact display would be the ideal choice.
- This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Part Number: 2.23inch OLED HAT
- 2.23inch OLED display HAT for Raspberry Pi, 128×32 pixels, SPI/I2C interface
8.8Very Good
View offer on:
Show more
8
HosyondHosyond 5 Pcs 0.91 Inch I2C IIC OLED Display Module OLED Screen DC 3.3V~5V Compatible with Arduino Raspberry PI (Blue Display Color)
Main highlights- Working power:3.3-5v, Operating temperature: -40 - 85 ℃.
- What will you get: there are 5 pieces OLED display module OLED display module for you.
- Resolution: 128 x 32 0.91 Inch OLED display, no need backlight, self-illumination, Display Color: White.
- Low power consumptio; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connection.
- Compatible with Arduino nano, R3 board, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc.
8.7Very Good
View offer on:
Show more
9
HosyondHosyond 5 Pcs 1.3 Inch IIC I2C OLED Display Module 128x64 Pixel SH1106 Screen Module Compatible with Arduino/Raspberry Pi (White)
Main highlights- Wide voltage power supply (3V~5V), compatible with 3.3V and 5V logic levels, no need for level conversion chips.
- Embedded driver IC: SH1106. Using the IIC/I2C bus, only 2 IOs are needed to light up the display.
- Compatible with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32 etc. Provide underlying driver technical support(Contact us for instructions).
- 128x64 resolution, the display effect is clear and the contrast is high. The viewing angle is greater than 160°. Even small fonts are easy to read.
- 1.3-inch OLED screen, self-luminous material, no backlight, ultra-low power consumption, normal display is only 0.06W. Blue display.
8.6Very Good
View offer on:
Show more
10
wavesharewaveshare 1.5inch RGB OLED Display Module, 128x128 Pixels Displaying 65K Colors, Support Raspberry Pi Arduino STM32, SPI Interface
Main highlights- Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
- SSD1351 OLED
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- A cool addition to any Arduino project and is fairly simple to get setup and running
- 128x128 high resolution, 65K colors, clearly displays colorful images
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for oled display raspberry pi
