10 Best Network Io Module In The Us - Black Friday 2024
Best Choice1
IntelIntel 10 Gigabit Dual Port 82599EB I/O Module Network Adapter AXX10GBNIAIOM
Main highlights- Ports Qty: 2 ports
- Form Factor: Internal
- Data Link Protocol: 10 GigE
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
wavesharewaveshare Industrial IoT 5G/4G/LoRa Wireless Expansion Board with UPS Module for Raspberry Pi Compute Module 4 Lite/eMMC Series, with CSI/HDMI/USB/Gigabit Ethernet/CAN / RS485 / M.2 B Key Interfaces
Main highlights- Uninterruptible Power: It is able to charge the batteries and provide power output at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
- This is an industrial expansion module Raspberry Pi Compute Module 4 Lite/eMMC series module, with UPS module. Onboard standard Compute Module 4 socket and partial Raspberry Pi GPIO header, suitable for Compute Module 4 Lite/eMMC series module
- Support 4G/5G Wireless modules: Onboard M.2 B KEY Slot, Compatible With 4G/5G Wireless Modules With M.2 B Connector
- Onboard Rich interfaces: It features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allowing additional 4G / 5G wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC
- Application scenarios: Suitable for IoT gateway, 4G/5G router, IoT data acquisition and monitoring, industrial PLC, or other industrial applications. Onboard UPS module, keeps the system running after disconnecting the power cable
9.5Excellent
View offer on:
Show more
3
On-Q15% OffLegrand - OnQ Cat5e Network Interface Module, Wifi Module with 8 Ports, Network Box Provides Connectivity to Ethernet Connected Devices, Black, AC1058
Main highlights- SUPPORTS punchdown termination of up to 8 Cat5e data lines for easy interface with the home network.
- QUALITY TESTED UL listed and exceeds TIA/EIA 568-C. 2 industry standards.
- PROVIDES connectivity for ethernet connected devices like computers, TV's, gaming systems and network streaming devices.
- MODULE MOUNTS in all On-Q structured wiring enclosures.
- EASY ACCESS to front mounted 110-idc punchdown terminals and RJ45 jacksEasy access to front mounted 110-idc punchdown terminals and RJ45 jacks.
9.4Excellent
View offer on:
Show more
4
XYGStudyfor Raspberry Pi Compute Module 4 IO Board Development Platform and Reference Base-Board Design for CM4 with Cables @XYGStudy
Main highlights- The IO board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple.
- The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
- Raspberry Pi Compute Module 4 IO Board, a development platform and reference base-board design for CM4
- Part Number: Compute Module 4 IO Board with Cables -- Compute Module 4 Acce A
- Package Contains: Compute Module 4 IO Board x1, USB-A to micro-B cable 1.2m x1, RPi Zero V1.3 Camera Cable 15cm (CSI adapter) x1, Power supply 12V 2A x1, CM-DSI-ADAPTER x1.
- Compute Module 4 IO Board also provides an excellent way to prototype systems using the Compute Module 4.
9.1Excellent
View offer on:
Show more
5
ICC11% OffICC CAT6 Data Module, 8 Ports, UL Listed & PoE++ Rated, High-Performance Network Interface for Ethernet Devices, Fits 14", 21", and 28" Structured Wiring Enclosures for Home Networks
Main highlights- VERSATILE USE: Provides reliable network connectivity for Ethernet devices including computers, TVs, gaming systems, and streaming devices. Perfect for use in home networks, requires a network switch or hub.
- INDUSTRY STANDARDS: Exceeds ANSI/TIA-568.2-D industry standards and is UL listed for safety and reliability.
- HIGH-PERFORMANCE CONNECTIVITY: Supports up to 8 CAT6 data lines with high-performance connectivity tested up to 10dB Headroom at 250MHz. Compatible with Cat6 UTP solid cable and supports Power over Ethernet (PoE++) up to 100W.
- EASY INSTALLATION: Features front-mounted 110 IDC punch-down terminals for quick and easy wiring in accordance with T-568-A standards, ideal for residential use in single-family and tract homes.
- COMPATIBILITY: Fits 14", 21", and 28" structured wiring enclosures using the 4 locking buttons. Compatible with most major manufacturers' enclosures.
9.0Excellent
View offer on:
Show more
6
IO CRESTIO CREST M.2 M-Key PCI-e 3.0 Interface Single Port 5.0 Gigabit Ethernet Modules
Main highlights- Supports pair swap/polarity/skew correction. Crossover Detection & Auto-Correction
- Supports IEEE 802.1P Layer 2 Priority Encoding. Supports IEEE 802.1Q VLAN tagging
- Supports Full Duplex flow control (IEEE 802.3x). Supports jumbo frame to 9K bytes. Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Supports 5G Lite (2.5G data rate) mode, 2.5G Lite (1G data rate) and GIGA Lite (500M data rate) mode
- Embedded OTP memory can replace the external EEPROM. Serial EEPROM
8.9Very Good
View offer on:
Show more
7
eletechsupDC 12V 24V Multifunction ESP32 Expansion Board WiFi Digital Analog IO Module for Arduino Web MQTT Ethernet Network Relay DIY (300MA Out Only Board)
Main highlights- Working voltage: DC 12V-24V
- On-board resources: 1x RS485 Interface 8x opto-isolated inputs (low level trigger, NPN type), 4x 0/4-20MA Current Input,4x 0-5V/10V Voltage Input,4x buttons, 1x 4 bit digital tube display, 1x ESP32 slots, 8x relay outputs
- ES32A08/ES33B08 can not work independently, must be under the control of the 38PIN ESP32 board to work
- DC 12V 24V Multifunction ESP32 Expansion Board Wifi Digital Analog IO Module
8.8Very Good
View offer on:
Show more
8
wavesharewaveshare 8-CH Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, with Various Isolation and Protection Circuits
Main highlights- This product is an industrial 8-ch relay module controlled via Ethernet port, adopts Modbus RTU/Modbus TCP protocols, supports PoE power supply, also comes with an ABS rail-mount case.
- The Modbus POE ETH Relay is very easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirements.
- Supports DC 7~36V wide range power input and PoE power supply. Supports relay control through MQTT protocol, comes with Alibaba Cloud MQTT application demo.
- Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit. Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection. High-quality relay, contact rating: ≤10A 250VAC/30VDC.
- Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the relay for a while and then close it automatically.
8.7Very Good
View offer on:
Show more
9
waveshare10% OffWaveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4
Main highlights- This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket.
- There are also industrial interfaces/resources including RS485, CAN, and RTC.
- Suitable For IoT Applications Like IoT Getaway, Wireless Router, Intelligent Data Acquisition...
- Standard CM4 Socket And Partial Raspberry Pi GPIO Header. Suitable For Compute Module 4 Lite/EMMC Series Module
- Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.
8.5Good
View offer on:
Show more
10
waveshareWaveshare Compute Module 4 IO Board with PoE Feature, Compatible with Raspberry Pi, Suitable for All Variants of CM4
Main highlights- Suitable For PoE Powered Raspberry Pi Projects, Or Other Industrial Context
- Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
- Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header. Suitable For All Variants Of Compute Module 4
- Onboard Connectors Including CSI/DSI/RTC/HDMI/USB/ETH/TF Card
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for network io module
