10 Best Module Pca9685 In The Us - Black Friday 2024
Aoicrie 5pcs PCA9685 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit, for Robot or for Raspberry pi Shield Module servo Shield
Main highlights- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- Communication Interface: IIC, PCA9685 contain an I2C-controlled PWM driver with a built-in clock.
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs.
- 16 Channel PWM/Servo Driver IIC interface-PCA9685 for arduino or for Raspberry pi shield module servo shield.
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
- Curious about how we select the top products for you? Explore How It Works
5Pcs PCA9685 16 Channel 12-bit PWM Servo Motor Driver Board I2C interface Controller PCA9685 module Raspberry Pi Shield Module Servo Shield
Main highlights- This is a PCA9685 16 channel I2C communication, built-in PWM driver and a clock.
- PCA9685 module 2-bit resolution for each output - for servos, that means about 4us resolution at an update rate of 60Hz.
- PCA9685 IIC module 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage
- 3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers.
- 16 channel PWM module supports using only two pins to control 16 free-running PWM outputs , the 6 address selection pin allows you to hook 62 driver boards on a single I2C bus, with a total of 992 PWM outputs.
HiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Main highlights- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- Communication Interface: IIC
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- 16-way steering gear control
VKLSVAN 3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller 12 bit IIC Interface Module for Arduino or Raspberry pi
Main highlights- Supports using only two pins to control 16 free-running PWM outputs ¨C you can even chain up 62 breakouts to control up to 992 PWM outputs.
- PCA9685 Contains an I2C-controlled PWM driver with a built-in clock; Power supply voltage is DC5-10V
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time .
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
AITIAO 3Pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Interface Module PCA9685 Controller Module for Robot Raspberry pi
Main highlights- Supports using only two pins to control 16 free-running PWM outputs, you can even chain up 62 breakouts to control up to 992 PWM outputs.
- PCA9685 Servo Driver: Power supply voltage is DC5-10V; Communication Interface: IIC; PCA9685 Contains an I2C-controlled PWM driver with a built-in clock.
- PCA9685 Driver Controller is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs(it is good when you want to control white or blue LEDs with a 3.4V+ forward voltage)
- 3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers.
- 12-bit resolution for each output,for servos, that means about 4us resolution at an update rate of 60Hz.
Alinan 4pcs PCA9685 16 Channel 12 Bit PWM Servo Motor Driver Board I2C IIC Module IIC Interface
Main highlights- 【The PCA9685 Chip】: The PCA9685 chip is wrapped in the center of the board, PCA9685 contain an I2C-controlled PWM driver with a built-in clock. 16 Channel PWM/Servo Driver IIC interface-PCA9685 for shield module servo shield
- 【Specification】: Voltage: DC5-10V power supply, Frequency: 40-1000Hz; Channel number: 16 channel; Resolution: 12 bit; Voltage: DC 5-10V, Size: Approx. 60 x 25 mm/ 2.36 x 0.98 inch
- 【Easy to Use】: supports using only 2 pins (6 address select pins) to control 16 free-running PWM outputs, you can control the 16 way servo motor, so you can wire up to 62 of these on a single I2C bus to control up to 992 PWM outputs. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time
- 【5V Compliant】: It is 5V compliant, which means you can control it from a 3.3V micro controller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
- ★All PWM output lines have a 220 ohm series resistor protection and can easily drive LED. 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Yeiwenl 2Pack PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module with 4Pack SG90 Servo for Arduino Robot
Main highlights- The PCA9685 chip is wrapped in the center of the board
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Packing list:2x PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module; 4x SG90 Servo
- PWM Servo Motor Driver IIC Module Voltage: DC5-10V power supply;Frequency: 40-1000Hz;Channel number: 16 channel.;Resolution: 12 bit;Voltage: DC 5-10V
- Micro servo running speed (at no load) : 0.09±0.01 sec/60° (4.8V) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree; Note: Starting current of the servo motor should be over 1A
HUAREW PCA9685 16 Channel PWM Servo Driver Board 12 bit IIC Interface Module Compatible with Arduino and Raspberry Pi (2pcs)
Main highlights- Using only two pins, control 16 free-running PWM, so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs
- PCA9685 contain an I2C communication PWM driver with a built in clock, so you do not need to continuously send it signal tying up your microcontroller
- PCA9685 IIC module 5V compliant, you can also control it from a 3.3V microcontroller and still safely drive up to 6V outputs
- Green power indicator lamp, 3 pin connectors in groups of 4, so you can plug in 16 servos at one time(servo motor plug slightly wider than 0.1 inch)
- 12 bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate
Onyehn PCA9685 IIC Module,16 Channel 12-Bit PWM Servo Motor Driver for Arduino Robot or Raspberry pi(4 Pack)
Main highlights- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- Communication Interface: IIC.
- Adjustable frequency PWM up to about 1.6 KHz;Configurable push-pull or open-drain outputManufacturer.
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs.
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
FainWan 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module Compatible with Ar-duino Robot
Main highlights- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- Communication Interface: IIC
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- 16-way steering gear control
Black Friday Sale
Deal ends in
HrsMinSec