10 Best Module Nmea0183 In The Us - Black Friday 2024
Best Choice1
QiiluBi‑Directional Converter Bi‑Direction Converter Module NMEA2000 and NMEA0183 KC‑2W IPX67 Waterproof DC 9‑30V ABS
Main highlights- Specification ---- Material: ABS, Voltage: 9-30V DC, Current Consumption: 50mA at 12V DC, : Overvoltage, power supply transient and accidental reverse polarity , Electrical: Optical isolation on the N2K Can bus, Connector: male, Cable Length: Approx. 1.2m/1.3yd, Factory Default Setting: Enable all PGN supported
- Professional manufacturing ---- Establish strict quality control standards, testing has been carried out before leaving the factory. Professional manufacturing, high reliability.
- Plug and play ---- Bi‑Directional Converter is easy to install, convenient to use, overvoltage , fast and efficient.Converts NMEA 0183 sentences to N2K PGNs, converts N2K PGNs to NMEA 0183 sentences.
- Function ---- Bi‑Directional Converter support fuel sensor, auto detect NMEA0183 baudrate and supported sentences. Take power from the N2K network, no external power supply is needed.
- Features ---- Firmware upgrade and NMEA0183 output baudrate configuration by supplied PC software.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
BigKingNMEA 0183 ‑ 2000 Converter, Bi Direction Converter Module NMEA2000 and NMEA0183 KC‑2W IPX67 Waterproof DC 9‑30V
Main highlights- Take power from the N2K network, no external power supply is needed.
- Support fuel flow sensor, auto detect NMEA0183 baudrate and supported sentences.
- Plug and play, easy to install, convenient to use, overvoltage protection, fast and efficient.
- Firmware upgrade and NMEA0183 output baudrate configuration by supplied PC software.
- Converts NMEA 0183 sentences to N2K PGNs, converts N2K PGNs to NMEA 0183 sentences.
9.7Exceptional
View offer on:
Show more
3
DIYmallsDIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Main highlights- bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via "Visit the DIYmalls Store"
- When you use it for pi, there is no driver installation needed but you need to install software
- When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold start”. Once you’ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
9.4Excellent
View offer on:
Show more
4
DIYmallsDIYmalls BN-180 GPS Glonass Module TTL NMEA-0183 1Hz 9600bps for Arduino Aircraft RC FPV Drone Flight Control
Main highlights- When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold start”. Once you’ve done it the first time, later when you restart bn180 GPS module, it will get a lock much faster.
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN180 GPS Module can be used with pi, esp32 development board, pc (driver required), drone flight controller etc.
- BN 180 gps doesn't have flash and compass. If you need it, please check bn-880 gps module via "Visit the DIYmalls Store"
9.2Excellent
View offer on:
Show more
5
LowranceNais Adapter Cable NMEA0183
Main highlights- NAIS ADAPTER CABLE NMEA0183
9.1Excellent
View offer on:
Show more
6
DIYmallsDIYmalls BN-880 GPS Module HMC5883 Compass Support GPS Glonass Beidou NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Main highlights- bn880 gps module is suitable for Open source flight controller, not for flight control with SCM. When you use it for r pi, there is no driver needed but you need to install software
- bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- bn 880 gps module has flash to save configuration. So you do not need to reset data when you use it next time.
- You can check bn180 bn220 gps module via "Visit the DIYmalls Store"
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
9.0Excellent
View offer on:
Show more
7
DIYmallsDIYmalls G28U7FTTL GPS Receiver Module 3.3V-5V w/Flash Ceramic Antenna 9600bps 1Hz NMEA-0183 for Arduino Flight Control
Main highlights- -g28u7fttl gps module built-in LNA signal amplifier, and flash to save configuration.
- -g28u7fttl gps comes with 3 cables to connect with breadboard, usb to ttl module, pc etc.
- -Red LED means power supplied, and the green indicates gps fixed.
- -Driver is required for using with windows.
- -25x25x4mm high-sensitivity ceramic antenna on the back.
8.8Very Good
View offer on:
Show more
8
GeekstoryBN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
Main highlights- What you will get: 1 X BN-180 GPS Module
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
8.6Very Good
View offer on:
Show more
9
BeitianBeitian GMOUSE USB Male Connector NMEA-0183 GPS Built-in Antenna GNSS Receiver BM-610 609 (BM-610)
Main highlights- GNSS Receiver
8.5Good
View offer on:
Show more
10
besttruckNMEA 2000 Dual Device Starter Kit to Process NEMA 2K Network for Lowrance Simrad Garmin, Provide Better Network Reliability, Include Backbone Cables Drop Cables Tees Terminators
Main highlights- Wide Application – Perfect solution for marine NMEA 2000 network setups to add devices from Yamaha and Honda to Garmin depth finders and Lowrance HDS live and ghost (engine data/outboard motors/fusion radios/GPS/radar/Chartplotters/sensors).
- Superior Material – Made of excellent quality copper, the sheath is made of PVC (Polyvinyl chloride) material, it has superior performance and corrosion resistance, IP68-rated waterproof connectors are metal tipped to prevent sonar interference. Meeting or exceeding OE specifications.
- Powerful Function - Color coding makes it easier and more efficient when installing a new system. Backbone Cables to provide better network reliability and reduce voltage drop for critical backbone connections. Drop Cables for ease of installation and wire routing.
- Package Include – Kit include all components needed to create a dual device. The NMEA 2000 dual device starter kit contains the following parts: 1x 1 Meter (3.3ft) power cable with tee (270000); 2 x 2 Meter (6.5ft) drop cable (270302); 1x Male terminator (270106); 1x Female terminator (270105); 1x dual tee connector (270103).
- Easy to Install - The NMEA 2000 Approved Power Cable with tee allows quick and easy connection of power to a NMEA 2000 network. The tee is red coded to easily identify the power cable once installed as part of a NMEA 2000 network. The yellow coupler connects to the corresponding backbone cables and tees, creating a simplified color coded network installation.
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for module nmea0183
