Our 10 Best Milling Cutter 10mm 2 Flutes

Carbide Milling Cutter 10mm 2 Flutes HRC55 Cemented Carbide End Mills Milling Cutters Alloy Coated Tungsten Steel End Mills Cutting Tools CNC Machining End Mills

                                    Main highlights
                                    With high bending resistance and wear resistance, it is specially used for high hardness, high-speed cutting applications.
The accessories have good rigidity and long service life, which reduces the user's tool cost.
Practical and a variety of processing environments, even in very dirty environments such as cast iron have good characteristics
Maintain tight tolerances, unparalleled performance
High grip strength, strong impact resistance, obvious speed advantage in large trimming and processing

                                

9.8

Exceptional

View offer on:

Hardware Milling Cutter 10mm 2 Flutes HRC55 Cemented Carbide End Mills Milling Cutters Alloy Coated Tungsten Steel End Mills Cutting Tools CNC Machining End Mills

                                    Main highlights
                                    The accessories have good rigidity and long service life, which reduces the user's tool cost.
Suitable for side milling, end milling and finishing of cast iron and titanium
Practical and a variety of processing environments, even in very dirty environments such as cast iron have good characteristics
Maintain tight tolerances, unparalleled performance
High grip strength, strong impact resistance, obvious speed advantage in large trimming and processing

                                

9.6

Exceptional

View offer on:

uxcell 2pcs 10mm Dia 10mm Shank Square Nose End Mill 2 Flutes HRC45 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining

                                    Main highlights
                                    Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
Square Nose End Mill: Cutting Diameter: 10mm /0.39"; cutting flute length: 25mm /0.98"; shank diameter: 10mm / 0.39"; overall length: 75mm / 2.95"; cutting hardness: HRC45; spiral angle: 35 degree.
Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
Feature: The helix angle of this milling cutter is 56 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help

                                

9.5

Excellent

View offer on:

uxcell Square Nose End Mill, 10mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 10mm Shank 75mm (3-inch) Length

                                    Main highlights
                                    Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
Square Nose End Mill: Cutting Diameter: 10mm / 0.39"; cutting flute length: 25mm / 0.98"; shank diameter: 10mm / 0.39"; overall length: 75mm / 3"; cutting hardness: HRC45; spiral angle: 35 degree.
Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.

                                

9.4

Excellent

View offer on:

SHARPRO 10mm Shank 10mm Cutting Dia. Carbide Square End Mill 2 Flute AlCrN Coated CNC Milling Bit, Apply for Alloy Steel, Stainless Steel, Cast Iron and Aluminum Cutting

                                    Main highlights
                                    ️Specification: 10mm shank & cutting DIA., 25mm cutting length and 75mm OVL.. Up to HRC45 hardness metals applies to Alloy Steel, Stainless Steel, Cast Iron, and Aluminum.
️Precise: -0.02mm close tolerance guaranteed by 100% quality-check requirements.
️Durable: AICrN coated improved heat resistance and wearing quality compared with AITBN, as it contains higher Aluminum.
️Compatibility: Compatible with CNC milling machines, CNC product centers, and milling machines, making it versatile for various machining tasks.
️Brand: High-quality guaranteed by SHARPRO self-owned, our factory is equipped with top global brands automation machines, and the unit-level unique serial code enables quality tracking along the way of production.

                                

9.1

Excellent

View offer on:

uxcell Square Nose End Mill, 2mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 10mm Cutting Length 4mm Shank

                                    Main highlights
                                    Wide Applications: Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.
Tips: Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
Solid Carbide: Made of super fine grain carbide, it has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
Features: Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
End Mill: Cutting Diameter: 2mm / 0.079"; effective cutting length: 10mm / 0.39"; cutting edge length: 6mm / 0.24"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC60. Used for groove machining, side milling and finishing.

                                

8.9

Very Good

View offer on:

HARFINGTON 2pcs Square Nose End Mill 4mm Shank 2mm x 10mm AlTiSin Coated Solid Carbide Long Reach Extended Neck 4 Flutes CNC Router Bit Milling Cutter for Stainless Steel Hardened Steel

                                    Main highlights
                                    Size - Cutting diameter: 2mm / 0.08"; effective cutting length: 10mm / 0.39"; cutting edge length: 5.5mm / 0.22"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC55; number of flutes: 4 flutes; end cut type: square end
Note - Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life.
Material - Made of super fine grain carbide, the end mill cutter has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
Features - Square end cut, 4-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
Applications - Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.

                                

8.7

Very Good

View offer on:

AYCHOLIZ 4 Flutes Carbide Square End Mill HRC68 Tungsten Steel Milling Cutter 10mm (0.394" Dia) CNC Milling Bits for Stainless Steel

                                    Main highlights
                                    Tips: AYCHOLIZ End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
Strong and Durable: Milling cutter is made of tungsten carbide material, it is high-wearable and has a long life; 4 flutes 35° helix angle design,great for speedy cutting smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance.
Package Included: 1pc square nose end mill. Cutting diameter: 10mm; Shank diameter: 10mm; Flute cutting length: 30mm; Overall length: 75mm.
Application: AYCHOLIZ End mill bits are suitable for side milling, slot milling, step milling,drilling, etc. Suitable for carbon steel alloy steel(up to HRC45), alloy steel(HRC50), cast iron(HRC35 ~ 45), hardened steel(HRC55), stainless steel(HRC35), titanium alloy，heat-resistant alloy, etc.
ALTiN Coating: High performance ALTiN coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds.

                                

8.6

Very Good

View offer on:

Aexit 10mm Shank Router Bits 10mm Cutting Diameter 2 Flutes End Mill Edge Treatment & Grooving Bits Milling Cutter

                                    Main highlights
                                    Weight : 48g;Package Content : 1 x End Mill
Total Length : 95mm/3.7";Color : Gray
Product Name : End Mill;Material : HSS-AL
Flute Number : 2;Cutting Diameter : 10mm/13/23
Cutting Depth : 40mm/1.5";Shank Diameter : 10mm/ 13/23

                                

8.5

Good

View offer on:

Surface Milling Cutter 10mm 2 Flutes HRC55 Cemented Carbide End Mills Milling Cutters Alloy Coated Tungsten Steel End Mills Cutting Tools CNC Machining End Mills

                                    Main highlights
                                    The accessories have good rigidity and long service life, which reduces the user's tool cost.
Suitable for solid wood, medium density fiberboard, laminate, particle board, plywood compact board, acrylic, etc. Avoid cutting metal and non-wood materials.
Practical and a variety of processing environments, even in very dirty environments such as cast iron have good characteristics
Maintain tight tolerances, unparalleled performance
High grip strength, strong impact resistance, obvious speed advantage in large trimming and processing

                                

8.3

Good

View offer on:

10 Best Milling Cutter 10mm 2 Flutes In The Us

1

Carbide Milling Cutter 10mm 2 Flutes HRC55 Cemented Carbide End Mills Milling Cutters Alloy Coated Tungsten Steel End Mills Cutting Tools CNC Machining End Mills

2

Hardware Milling Cutter 10mm 2 Flutes HRC55 Cemented Carbide End Mills Milling Cutters Alloy Coated Tungsten Steel End Mills Cutting Tools CNC Machining End Mills

3

uxcell 2pcs 10mm Dia 10mm Shank Square Nose End Mill 2 Flutes HRC45 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining

4

uxcell Square Nose End Mill, 10mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 10mm Shank 75mm (3-inch) Length

5

SHARPRO 10mm Shank 10mm Cutting Dia. Carbide Square End Mill 2 Flute AlCrN Coated CNC Milling Bit, Apply for Alloy Steel, Stainless Steel, Cast Iron and Aluminum Cutting

6

uxcell Square Nose End Mill, 2mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 10mm Cutting Length 4mm Shank

7

HARFINGTON 2pcs Square Nose End Mill 4mm Shank 2mm x 10mm AlTiSin Coated Solid Carbide Long Reach Extended Neck 4 Flutes CNC Router Bit Milling Cutter for Stainless Steel Hardened Steel

8

AYCHOLIZ 4 Flutes Carbide Square End Mill HRC68 Tungsten Steel Milling Cutter 10mm (0.394" Dia) CNC Milling Bits for Stainless Steel

9

Aexit 10mm Shank Router Bits 10mm Cutting Diameter 2 Flutes End Mill Edge Treatment & Grooving Bits Milling Cutter

10

Surface Milling Cutter 10mm 2 Flutes HRC55 Cemented Carbide End Mills Milling Cutters Alloy Coated Tungsten Steel End Mills Cutting Tools CNC Machining End Mills

Black Friday Sale

Related deals you might like for milling cutter 10mm 2 flutes

Rannb End Mill Cutter 4-Flute CNC Bit 10mm/0.4" Cutting Dia and Shank Dia - Pack of 2

$9.99

uxcell Square Nose End Mill, 0.9mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 10mm Cutting Length 4mm Shank

$13.69

uxcell 2pcs 10mm Shank 10mm x 22mm Straight Flat Nose End Mill Cutter CNC Router Bits 2 Flute

$13.09

uxcell Square Nose End Mill, 0.6mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 10mm Cutting Length 4mm Shank

$13.19

uxcell 10mm Dia 8mm Shank Bottom Cleaning Router Bit, 2 Flutes Carbide Tipped Cutter Uncoated for Woodworking Blue

$8.49

uxcell Square Nose End Mill, 10mm Cutting Dia Tungsten Carbide Tip 3 Straight Flutes Milling Cutter with 10mm Straight Shank, 2pcs

$10.29

ASNOMY 10pcs 4-Flute End Mill Set, Metric CNC Milling Cutter Drill Bits Router Bits Cutter Tool Set for Wood Aluminum Steel Titanium, Straight Shank 2-12mm

$15.89

CoCud HSS-AL Corner Rounding End Mill Cutter, 2 Flutes 2mm Radius, Milling Cutter for Alloy Hardened Steels - (Applications: for Plastics Milling)

$9.99

1pcs HSS T-Slot Cutter 4 Flutes Carbide End Mills Cutting Diameter 2-10mm Metal Aluminum Steel Copper Machining Carbide CNC Milling Tool (Size : for Aluminum, Color : 10X2.5)

$21.66

10pcs 3.175/4/5/6/8/10mm Two Flutes Carbide Spiral CNC Milling Cutter Bits Up Down Cut DLC Coated Compression Endmill CNC Router (Size : 8x25x60L, Color : 10PCS)

$202.61

Sign up and get exclusive special deals