10 Best Micromesh Polishing In The Us - Black Friday 2024
Best Choice1
Micro-Mesh14% OffMicro-Mesh 19 Piece Woodworkers Pack with 18 Abrasive 3 Inch by 6 Inch Sheets and a Foam Sanding Block
Main highlights- This MADE IN THE USA Kit contains 2 each of the following; 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000. Micro-Mesh can be used wet or dry. When using Micro-Mesh dry, it can be "unloaded" by rapping against the palm of your hand. Micro-Mesh can also be cleaned by using a stiff, short bristled brush. It may not be necessary to go through every grade of Micro- Mesh to reach the desired finish.
- Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro-Mesh step for an “ultra” high gloss finish.
- Micro-Mesh performs very well in conjunction with polyurethane,polyester,epoxy,lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro-Mesh and continue through the series (3200-12000) until the desired gloss is achieved.
- Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop while using the
- Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Micro-Mesh3 x 4 Micro-Mesh TM Sanding Pads 9 Grits
Main highlights- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
9.4Excellent
View offer on:
Show more
3
Micro-MeshMicro-Mesh 2 inch by 2 inch Double Sided Soft Touch Sanding Pads Ideal for Pen and Bottle Stopper Polishing. Perfect for Cycle Sanding Acrylic Materials with CA Glue Finish
Main highlights- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
9.3Excellent
View offer on:
Show more
4
Micro-MeshMicro-Mesh Pen Sanding Kit
Main highlights- Works great on stabilized woods, acrylics & solid surface materials. Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. 9 Micro-Mesh Pads included.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000.
- The results are truly wonderful and will most definitely please the most discriminate of eyes. The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it.
- Ideal for use with plastics, resin or impregnated blanks when turning. The pads can also be used around the home for fine repair work.
9.1Excellent
View offer on:
Show more
5
Micro-Mesh19% OffMicro-Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block
Main highlights- 🇺🇸 This Made In the USA KIT INCLUDES: 1 each of the following grit 3 inch by 4 inch sheets: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000. Also included is a 2 inch by 3 inch foam sanding block. Micro-Mesh can be used wet or dry.
- Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro-Mesh step for an “ultra” high gloss finish.
- MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro-Mesh and continue through the series (3200-12000) until the desired gloss is achieved.
- Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop.
- Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.
9.0Excellent
View offer on:
Show more
6
Peachtree Woodworking SupplyPeachtree Woodworking Supply 2 inch by 2 inch Micro-Mesh Soft Touch Sanding Pads w/ Galvanized Steel Dispenser - for Pen & Bottle Stopper Turning, Cycle Sanding Acrylic Materials (9 Micro Mesh Pads)
Main highlights- When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000. The more you get into to woodturning the more the reality of being organized comes into play. This couldn’t be more true than when it comes to our abrasives. This unique dispenser accepts 2” x 2” Micro-Mesh abrasive pads
- The dispenser measures 6” tall, 3¼” wide (at base tabs), 2-7/16” wide (actual abrasive holder) by 1½” deep. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. Package comes with 9 color coded micro mesh pads and 1 each galvanized steel dispenser.
- The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment. It can be mounted flat against a wall or it can be mounted to a table top. Of course you don’t have to mount it at all.
- Specifically designed for the Micro-Mesh 2” x 2” 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. This works wonderfully well when step sanding your finished turning project. Simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top.
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it. This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional!
8.9Very Good
View offer on:
Show more
7
MusicNomadMusicNomad Replacement Tracers Pads - 4 pc. Micromesh Fret Polishing Loops (MN861)
Main highlights- With 13 square inches (84cm) of polishing area, they are designed to slide on to both Tracer handles and give you a great polishing experience. No more fumbling around with traditional sheets of polishing paper.
- They come in 4 Micro-Mesh grits (1000, 3600, 6000, 12000) marked in the order to polish: 1, 2, 3, 4. It doesn't get any better than that.
- Includes 4 custom designed Micro-Mesh replacement loops to use with Music Nomad's Tracers handles. Micro-Mesh utilizes an innovative "cushioned" abrasive technology that delivers uniform, floating abrasive crystals bonded to a flexible, resilient cloth backing, giving superior results.
8.8Very Good
View offer on:
Show more
8
StewMacMicro-Mesh Dual Angle Touch-up Sticks, Set of 4
Main highlights- Micro-Mesh Dual Angle Touch-Up Sticks measure 5-3/4" x 1/2". Sold in a set of 4, each stick features 2 grits
- Ideal for small touch-ups on glossy finishes, these tapered sticks are padded to flex and conform to the work. We rely on these in our own shops for finish touch-ups and repairs.
- Grits - Coarse: 1500/1800 / Medium: 2400/3600 / Fine: 4000/6000 / Ultra Fine: 8000/12000
- Great for finish touch-ups and fret polishing. Cushioned Micro Mesh abrasive for a scratch-free mirror finish, and a special shape for hard to reach areas.
8.7Very Good
View offer on:
Show more
9
Micro-MeshMicro-Mesh Micro - 4N0000V Colored Sanding Sticks
Main highlights- Used for metal and wood finishing
- Use to smooth jagged edges, protrusions and raised particles from contoured areas
- Use a utility knife to tailor shape them
- Re-usable and last a very long time
8.5Good
View offer on:
Show more
10
Micro-MeshMicro-Mesh Corian Countertop Repair Kit
Main highlights- This kit is perfect for removing scratches and stains from your solid surface sink. Practicing with this kit in your sink is a good idea before using it on your kitchen countertop.
- The pads are long-lasting, and easily conform to convex or concave surfaces. Use the appropriate pad to remove the damage and then work through the different grades of MICRO-MESH until you have matched your finish. This kit will handle finishes ranging from matte to high gloss.Repairs scratchs Repairs burns Brings back high gloss finish
- The more comfortable you are with the product and how it works, the more successful your outcome will be.
- Includes: 1 - 3" x 4" MICRO-MESH 300 AO white/300AO white Soft Touch Pad 1 - 3" x 4" MICRO-MESH 600 AO yellow/800 AO green Soft Touch Pad 1 - 3" X 4" MICRO-MESH 1500 AO peach/2400 AO lilac Soft Touch Pad 1 - 3" x 4" MICRO-MESH 4000 AO blue/12000 AO grey Soft Touch Pad SOFT TOUCH PADS are made of two MICRO-MESH sheets laminated to 3/16" foam center. You receive 4 Soft Touch Pads. 3 pads are double sided containing 2 different grits. The White or Light Yellow pad is 300 grit only. MADE IN THE USA!
- For “spot” repairs on your countertop or over-all surface renewal of your solid surface sink or kitchen counter top – not meant for stone, engineered stone, Formica, laminates, wood or metal surfaces. Kit will remove scratches, stains and burns
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for micromesh polishing
