10 Best Micro Sd Recorder Module In The Us - Black Friday 2024
Best Choice1
AITRIPAITRIP 5 pcs ISD1820 Sound Voice Recording Playback Module Sound Recorder Board with Microphone Audio Loudspeaker
Main highlights- easy to use 10 seconds of voice recording
- With loop playback, jog playback, single-pass playback
- This module can directly drive 8 Euro 0.5W small speakers, easy to use 10 seconds voice recording and playback.
- Recording and playback control mode: button control or single-chip microcomputer, control line IO has been led out.
- Power Supply: 3-5V
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DEVMODEVMO Openlog Serial Data Logger Open Source Data Recorder ATmega328 Support Micro SD Module
Main highlights- ★three modes: new, add, command.baud rate can be set to 300-1000000bps.
- ★support to store fat16 / fat32 format tf card, storage capacity up to 32G,has a simple command line interface.
- ★on the computer to change the tf card config file (if the new card, insert the card after the first power, which will automatically create config file), you can change the settings, such as baud rate. You do not need to buy any special tools to change the serial port settings to make use of your needs.
- ★guaranteed to run at least the connection for vcc, gnd, rx.two led lights indicate the running status.
- ★ input voltage 3.3V to 12V, preferably 3.3 to 5V.free current 2ma, the maximum recording rate when 6ma.
9.7Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
Main highlights- Lightweight and compact: Weighing just 0.11 pounds, the module is lightweight and compact for easy handling.
- Compatible with Arduino UNO, R3, MEGA 2560 Due: The HiLetgo 5pcs Micro SD TF Card Adapter Reader Module works with these Arduino boards for easy data transfer.
- Chip level conversion: The module converts chip level data into a standard format for easy access and analysis.
- 6-pin SPI interface: The module features a 6-pin SPI interface for connecting to micro SD cards and reading data.
9.4Excellent
View offer on:
Show more
4
GenericOpenlog Serial Data Logger Open Source Data Recorder Naze32 F3 ATmega328 Support Micro SD Module for Arduino
Main highlights- Openlog Serial Data Logger Open Source Data Recorder Naze32 F3 ATmega328 Support Micro SD Module For Arduino
9.2Excellent
View offer on:
Show more
5
WWZMDiBWWZMDiB 3Pcs Micro SD TF Card Adater Reader Module. Support Micro SD Card, Micro SDHC Card for Arduino UNO R3 MEGA 2560 Due
Main highlights- The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver,
- Support Micro SD Card, Micro SDHC card (high speed card)
- Package Included: 3 * Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module
- Micro SD card connector: self bomb deck, easy card insertion.
- Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
9.1Excellent
View offer on:
Show more
6
UMLIFEUMLIFE Micro SD SDHC TF Card Adapter Reader Module with SPI Interface Level Conversion Chip Compatible with Arduino Raspberry PI 10pcs
Main highlights- ✹✹Voltage: 4.5V~5.5V DC; Communication Interface: Standard SPI; Interface Voltage Level: 3.3V or 5V;
- ✹✹The module built-in level regulator circuit, level conversion circuit board that can interface level is 5V or 3.3V.
- ✹✹The module (Micro SD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. for Arduino users can directly use the for Arduino IDE comes with an SD Card to complete the library card initialization and read-write.
- ✹✹The communication interface is a standard SPI interface, easy to connect to any device with SPI interface;
- ✹✹Micro SD card to signal the direction of converts 3.3V, Micro SD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.；
- ✹✹Applicable card type: Micro SD Card, Micro SDHC Card.
8.8Very Good
View offer on:
Show more
7
JRPress-Button Control Activated 8M MP3 Recordable PCB Sound Module USB Downloadable Sound Module for Crafts, Christmas,New Year Greeting Cards-with Speaker Lithium Battery Powered and USB Cable
Main highlights- 【Creative gifts】Ideal for creating your own talking gifts,sound effect to plush toys, stuffed animals,photo frames, personalized gifts, kid activities, paints, hobbies, craft projects, model trains, etc
- ️【Self-adhesive】Self-adhesive on the back of the sound module makes it easy to paste on the gift/card/box. Turn off the switch during installation to avoid power consumption.
- ️【Cautions】Plush Toy Heart Recorder supports Windows and MAC operating systems, you can connect your computer via USB cable to configure the playback mode of your desired voice files ( Please refer to the accompanying instructions for more information and illustrations). If you have any questions, please feel free to contact us!
- ️【8M memory】Built-in 8M memory with micro USB port, recognized by the computer as a USB drive, just like an MP3 player, you can add any MP3 audio file to the internal storage, as long as it does not exceed 8MBNo limitations can record as many times as you wis.
- ️ 【Six Playback Modes】Stuffed Anima Press Recorder has six playback modes 01=06, you need to plug in the USB cable to connect to the Windows system to set the different modes and change the audio by connecting to the "TXT" profile to set the device. The included (USB cable) makes it easy to charge the device and change music.
8.7Very Good
View offer on:
Show more
8
JESSINIEJESSINIE Openlog Serial Data Logger Open Source Data Recorder Flight Control Board Support Micro SD Module ATmega328 Serial Port Data Storage
Main highlights- The minimum connections to ensure operation are vcc,gnd,rx; With two led lights indicate operating status
- The input voltage is 3.3V to 12V, preferably 3.3 to 5V, Idle current 2ma, maximum recording rate 6ma
- Supports storage in fat16/fat32 format tf cards with a storage capacity of 64G
- Simple command line interface, 3 modes: new, add, command
- Baud rate support 2400, 4800, 9600, 19200, 38400, 57600, and 115200
8.6Very Good
View offer on:
Show more
9
DAOKAIDAOKAI 5PCS Micro SD Card Module Mini TF Card Reader Adapter Memory Expansion Module SD Card Reader/Writer for Arduino with Pins, with Dupont Cable
Main highlights- Specification: Voltage: 4.5V~5.5V DC; Communication Interface: Standard SPI; Interface Voltage Level: 3.3V or 5V.
- Package includes: You will get 5 x Micro SD Card Adapter, 30 x Female to Male Dupont Cable.
- Module: Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card.
- Feature: Small volume, Size：17.9x17.9mm/0.7x0.7in. 2 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
- Applicable card type: Micro SD Card, Micro SDHC Card.The communication interface is a standard SPI interface, easy to connect to any device with SPI interface.
8.5Good
View offer on:
Show more
10
StemeduStemedu 2PCS Micro SD Card Module TF Card Memory Storage Adapter Reader Board SPI Interface with Integrated Circuit Breakout for Arduino for Raspberry Pi
Main highlights- 🚩 This is a Micro SD card reader module, reading and writing through the file system and the SPI interface driver. Please make sure the card format is FAT32
- 🚩 The signal in the direction of the Micro SD card is converted into 3.3V, and the MISO signal in the direction of the control interface from the MicroSD card is also converted into 3.3V. Generally, the AVR microcontroller system can read this signal.
- 🚩 SCM system can be completed within a file MicroSD card. Support Micro SD Card and Micro SDHC card (high speed card). Maximum storage of Micro SD card is 2GB, Micro SDHC card is 32GB.
- 🚩 Microcontroller system to complete the MicroSD card read and write files. Ar-duino users can directly use the Ar-duino IDE comes with an SD card to complete the library card initialization and read and write.
- 🚩 Document link: https(:)//www(dot)instructables(dot)com/id/Micro-SD-Card-Tutorial/
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for micro sd recorder module
