10 Best Meshtastic In The Us - Black Friday 2024
S5 Ranger from Spec5 Meshtastic LoRa Radio Keyboard and Touch-Screen + Notification Sound, Tactical Green
Main highlights- Out-of-the-Box Ready: Enjoy hassle-free setup with no complicated configurations needed. Just charge the device, power it on, and instantly connect to the Meshtastic network, allowing you to send messages, share locations, and enhance your safety in no time.
- Meshtastic-Enabled Radio for Hikers and Preppers: Specifically designed for adventurers and emergency preppers, this device ensures seamless connectivity in remote locations, providing reliable communication when needed most.
- Long-Range Connectivity: The S5 Ranger leverages Meshtastic technology to deliver long-range, low-power radio communication. It is the perfect solution for areas where traditional cellular signals are unreliable or nonexistent.
- Lightweight and Durable Design: Thoughtfully engineered to be both lightweight and compact, this device is easy to carry or clip onto your backpack, ensuring you don’t sacrifice performance for portability during your adventures.
- Integrated GPS: This device's built-in GPS allows you to effortlessly share your location with your team, ensuring everyone stays on the same map. This feature enhances group coordination and significantly reduces the risk of getting lost during your adventures.
- Empower Your Adventure and Preparedness: Join a vibrant community of adventurers and preppers prioritizing safety, connectivity, and independence. This device is essential for exploring new trails, ensuring you stay connected and prepared for any situation.
- Durable PETG Construction: This device is crafted with robust PETG material to withstand tough outdoor conditions. It provides resilience against impact, wear, and harsh environments, ensuring reliable communication wherever you are.
- Built-In High-Capacity Battery: A powerful internal non-removable 3300mAh battery offers up to 8 hours of active use and 24 hours of standby time, ensuring reliable performance during extended off-grid adventures.
- Curious about how we select the top products for you? Explore How It Works
LILYGO Meshtastic T-BeamSUPREME ESP32-S3 TTGO Development Board with 1.3 inch SH1106 OLED LoRa Module (UBLOX M10S 915mhz)
Main highlights- 【Wireless Connectivity】2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- 【T-BeamSUPREME】T-BeamSUPREME CORE consists of ESP32-S3, LoRa SX1262, and GPS CORE can be replaced according to your experimental requirements
- 【Meshtatic】T-BeamSUPREME is a collaborative development board produced by LILYGO and Meshtatic
- 【MCU】ESP32-S3R8 Dual-core LX7 microprocessor
- 【Github】github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series
LILYGO T-Deck Plus Meshtastic ESP32-S3 LORA-89 915Mhz SX1262 Ulbox GPS White Keyboard 2.8 Inch Display TTGO Development Board with ABS Shell Version
Main highlights- MCU: ESP32-S3FN16R8 Dual-core LX7 microprocessor
- Github:github.com/Xinyuan-LilyGO/T-Deck
- Firmware: Meshtastic firmware has been pre-burned.
- Development : Arduino、 PlatformIO-IDE、 Micropython
- Attention: T-Deck-Plus has assigned the pins on the Grove interface to the GPS module, so the Grove interface of T-Deck-Plus cannot be used
LILYGO T-Echo Meshtastic LoRa SX1262 Wireless Module 915MHz TTGO Development Board NRF52840 GPS RTC NFC for Arduino
Main highlights- Without BME280 temperature pressure sensor
- T-SX1262 wireless transceiver module is designed with Semtech SX1262LORA RF transceiver chip and operates in 915MHz ISM band. Integrated high stability TCXO 32MHz crystal oscillator
- T-Echo selects NRF52840 Advanced Bluetooth 5 as the multi protocol SoC for Thread and Zigbee
- Advanced LORA spread spectrum communication technology, with strong anti-interference and confidentiality, can realize remote wireless data transmission and reception
- Adapt to Meshtastic firmware
SenseCAP Card Tracker T1000-E for Meshtastic
Main highlights- Powerful Positioning Capabilities: Integrated with the Mediatek‘s AG3335 GPS chip, it provides high-precision positioning services.
- Open Source Support: Compatible with the Meshtastic open-source mesh networking protocol, suitable for long-range and low-power communication needs.
- Multi-protocol support: Featuring nRF52840 and LR1110, it supports LoRa (global ISM bands in the 863-928 MHz range). After purchasing the T1000-E, you can freely choose your region in the Meshtastic app. It also supports Bluetooth 5.0, Thread, and Zigbee, ensuring compatibility with a wide range of devices and networks.
- Expandable Interfaces: Designed with four pogo pins, it supports USB interface for DFU (Device Firmware Upgrade), serial logging, and API interface, simplifying device management and debugging.
MakerFocus 2 Set ESP32 LoRa V3 Development Board with 915 MHz Antenna and Case Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes
Main highlights- Support Arduino Development Environment: Support ESP32 + LoRaWAN protocol Arduino library, this is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol
- Power Supply: Onboard SH1.25 battery interface, integrated lithium battery management system; You can also use the Type-C interface to power the development board, the interface with complete ESD protection, short circuit protection, RF shielding and other protection measures
- Perfect Design: Integrated WiFi, LoRa, Bluetooth three network connections, onboard WiFi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- OLED Display: Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information
- Note: Not all LoRa antennas fit the case. If the antenna protective shell is too long and cannot be installed into the shell, please shorten the antennas protective shell and be careful not to damage the internal copper tube
- Easy to Use: With good RF circuit design and low-power design, ESP32 development board is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading and IoT developers
- 2pcs WiFi LoRa 32: When use WiFi LoRa 32, you can use 2 pieces together. One is used for receiving and another one is used for sending
LILYGO T-Deck ESP32-S3 LoRa BLE WiFi TTGO Module LoRaWAN Long Range Development Board with 2.8 inch LCD Display (915MHz)
Main highlights- 【Wireless Connectivity】2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- 【Onboard functions】Trackball、 Microphone、Speaker
- 【MCU】ESP32-S3FN16R8 Dual-core LX7 microprocessor
- 【Github】github.com/Xinyuan-LilyGO/T-Deck
- 【Development】Arduino、PlatformIO-IDE、 Micropython
LILYGO T-BeamSUPREME Meshtastic ESP32-S3 TTGO Development Board LoRa L76K GPS WiFi Bluetooth Module with 1.3inch SH1106 OLED (L76K 915Mhz)
Main highlights- The CORE is composed of ESP32-S3, LoRa SX1262, and GPS ( L76K chip).
- The CORE can be replaced according to your experiment requirements, and the UBLOX and L76K versions are currently available
- T-BeamSUPREME is a collaborative development board produced by LILYGO and Meshtastic
- If you have any questions or suggestions about the product, please feel free to contact us. We will answer your question as soon as possible
- Github : github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/assets/image/T-BEAM-S3-Supreme.jpg
DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Main highlights- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- Upgraded V3 version has better impedance matching of RF circuits
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
AYWHP 3PCS ESP32 LoRa Development Board, LoRa V3 Meshtastic ESP32 WiFi, ESP32 LoRa V3 WiFi Bluetooth Dual Core 240MHz CP2102 Chip with 0.96" OLED Display 863-928MHz Antenna for Arduino
Main highlights- Supports Arduino Development: Supports ESP32 + LoRaWAN protocol. The Arduino library is a standard LoRa WAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol.
- Supports 868-915MHz band: It supports LoRa communication in 868-915MHz band, which is suitable for wireless communication requirements in different regions.
- Perfect Design: Integrated WiFi, Lora, Bluetooth, three types of network connections, laid WIFI, Bluetooth, and special 2.4GHz metal spring antenna.
- Easy to Use: Reserved IPEX (U.FL) interface for LoRa use. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing.
- 0.96inch OLED Display: The LoRa ESP32 development board is equipped with a 0.96-inch OLED display to show debugging information, battery operation and other information.
Black Friday Sale
Deal ends in
HrsMinSec