10 Best Makita 18v Adapter Diy In The Us - Black Friday 2024
Best Choice1
QSDXNYDC18V to 12V Step-Down Converter for Makita 18V LXT for Power Wheel Battery Adapter, DC 12V 15A 180W Buck Converter Regulator with 30A Fuse & Wire Terminal for Golf Cart RC Car Truck Light & DIY
Main highlights- Widely Used: This Step-down Converter suitable for various 12v devices ideal for upgrade motor, ride on toys, golf carts, car trucks, speaker, monitoring equipment, power tools, led strip light, work lights or robotics DIY etc.Warning: This product is not a charger, it only outputs battery voltage and power directly from your battery.It is best to remove the battery after use.
- Step-down Converter: Input Voltage: DC 18V; Output Voltage: DC 12V; Output Current: 15A Max; Output Power 180W Max. Our voltage buck converter adopted synchronous rectification technology further improve conversion efficiency and good stability.
- High Quality & Easy to Use: DC 18V to DC 12V Step down converter made of aluminum shell with epoxy potting, waterproof, anti-dust, anti-humidity, anti-shock and better heat dissipation, more durable. We combine the battery adapter and the voltage converter with 2 heat-resistant wires. make it more easy to use. Just install the battery to the battery adapter and then connect the voltage converter to your device.
- Better Safety: Voltage regulator equipped smart chip, provides Over-current, Over-load, Low-load, Over-voltage, Under-voltage, Over-heat and Short-circuit intelligent protection. We upgraded low voltage protection, this voltage converter built in over low voltage protection, auto shut off if the battery voltage is lower than 14.4v, protect your devices from overpower damage.
- Adapter Compatibility: Perfectly compatible with Makita 18V LXT lithium batteries, works with Makita 18V BL1850B, BL1860B,BL1830B,BL1840B,BL1820B etc. Our battery adapter connector is well-design, snugly fit your battery, easy to install and remove.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MAKBOS14% Off18V to12V Step Down Converter for Makita 18V Battery for Power Wheels Adapter,Power Connector for Car Appliances,DIY Charger Buck Converter Power Station,Cigarette Lighter Connector,Outdoor Camping
Main highlights- [Fit for Makita 18-Volt Lithium-Ion battery]-Compatibility:This battery adapter that works for Makita 18V Li-ion battery only,replacement battery for Makita BL1830 BL1840 BL1850 BL1860 BL1840B BL1850B BL1860B BL1820 batteries.
- [Factory direct store after-sales]-Package Includes:1*DIY Adapter (Battery not included),If you have any questions, please feel free to contact us and we will give our best to solve question
- [Easy to DIY operate]-TThe Battery Voltage Converter is 15V-21V DIY Regulated Intput, Output Voltage 5V-13V Max Output 10A with Terminal Block with Cigarette Lighter Connector, and Equipped with over-current and short-circuit protection allowing you to power various car appliances safely with ease. This voltage converter is perfect for ensuring a smooth and safe power supply to confidently use it to operate for your car accessories.
- [Compact and Portable]--This power adapter is lightweight and easy to carry, making it ideal for road trips or camping. It is a versatile device that can power car appliances, gadgets, and charge electronics such as automotive supplies and chargers, anywhere that is essential for both travelers and outdoor enthusiasts. This adapter is a valuable addition to any traveler's gear, offering peace of mind and reliability during outdoor adventures.
- [Better security]-The adapter is equipped with a fuse and high-quality silicone copper to prevent excessive transient current from damaging the battery and equipment, moreover, we use heat-resistance 14 AWG wire which own 10A max permissible current, you can use it safely.
- [Advantageous features]-18V DIY Regulated Iutput, Output Voltage 5V-13V Max Output 10A with Terminal Block with Cigarette Lighter Connector,Buck Converter Reducer Regulator, Voltage Reducer Transformer
9.8Exceptional
View offer on:
Show more
3
CrivnharPower Wheel Adapter for Makita 18V Battery with Fuse & Switch & Wire terminals，Power Connector for Rc Car, Robotics, Rc Truck,DIY use, Work with for Makita BL1860 BL1850 BL1840 BL1830 Li-ion Battery
Main highlights- Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter
- Perfectly compatible : work with for Makita BL1860 BL1850 BL1840 BL1830 BL1860B BL1850B Li-ion batteries. Easy to install ,locks on you battery very well.
- Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed; You can use it to upgrade your power wheels, Rc toys, Robotics DIY etc. Maximum permissible current 20A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY.
- Easy to DIY operate:The adapter is equipped with a switch to control the current of the battery on or off. At the same time, it is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better.
- Better security: The adapter(1pcs included) is equipped with a fuse and high-quality wire to prevent excessive transient current from damaging the battery and equipment. You can use it safely
9.7Exceptional
View offer on:
Show more
4
DEWDYS2Packs Power Wheel Adapter for Makita 18V Battery Adapter 18V Power Wheels Battery Converter with Switch & Fuses & Wire Terminals, 14AWG Wire,Power Connector for DIY Rc Car Toys, Robotics and Rc Truck
Main highlights- Safety Design:The adapter is equipped with a switch to control the battery current on or off.The fuse supply overpowers protection. Waterproof fuse holder rubber cap fits on tightly to protect blade fuse inside.Heat-resistance 14 AWG wire is suitable for high-power batteries.The copper contact improves the conductivity and safety.
- Package includes:2 power wheel adapter with 14 gauge wire,6 pieces of 30A fuse.The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapterIf you have any questions, please feel free to contact us!
- Multi-scene use: Multi-scene use: The power wheel adapter is installed with 8" 16 gauge wire; you can use it to upgrade your power wheel, RC toys, robot DIY, etc. The maximum allowable current is 30A. Meet your multiple DIY needs and you can let your kids enjoy the endless fun brought by the power wheel.
- Easy to install and remove：Just move the power adapter to the inside of the groove and push the converter to lock the battery.To remove the power adapter, please press the battery button first, then push it back to remove. There are three fixing holes on the back of the battery adapter, you can fix it in any position of the DIY product.
- Compatibility:perfectly compatible with Makita 18V lithium-ion batteries BL1860 BL1850 BL1840 BL1830 BL1860B BL1850B ,etc.The power wheel adapter can be installed easily and locks your battery nicely.
9.6Exceptional
View offer on:
Show more
5
Fybemax2 Packs Power Wheels Adapter for Makita 18V Battery with Fuse & Wire terminals & 12 Gauge Wire, Good Power Convertor for DIY Ride On Truck, Robotics and RC Toys
Main highlights- 【Widely used】power wheels adapter has 12 gauge wire installed, Maximum permissible current 20A, can use it to upgrade your power wheels, rc toys, work lights or Robotics DIY with enough power.
- 【Safety Design】The power wheel converter with 12 AWG wire and 30A fuse. The thick copper wire improves conductivity and safety, allows large current to make safe use on equipment. And the fuse holder can prevent excessive transient current from damaging the battery and equipment.
- 【Notice】 This converter cannot be used for charging. The red wire goes to the positive terminal and the black wire goes to the negative terminal. Please make sure the positive and negative wires of the device are connected accordingly. If not used for a long time, please remove the battery from the adapter.
- 【High quality】Our battery adapter connector is well-made, snug fit your battery, can install and lock battery easily. Made of durable ABS plastic, heat resistant and not easy to corrode, perfect for indoor and outdoor use.
- 【Adapter Compatibility】2 Packs Power Wheels for Makita 18V lithium-ion batteries, including BL1815 BL1820, BL1830, BL1840, BL1850, BL1860 etc..
9.4Excellent
View offer on:
Show more
6
FiihioPower Wheels Adapter for Makita 18V Lithium Battery BL1830 BL1840 BL1850, Battery Converter with 14 Gauge Wire fit for DIY RC Toys,Rc Truck,Robotics and Work Lights (1pack,Battery Not Included)
Main highlights- Wide range of uses:The Power Wheel Adapter is fitted with 12.5" 14 gauge wire for high power batteries, and the terminal blocks allow you to quickly and accurately connect the adapter to your device, so you can upgrade your Power Wheel, RC car or robot DIY with confidence .
- Perfectly Compatible: The power wheel adapter is only suitable for Makita 18V lithium battery, such as BL1830 BL1840 BL1850 BL1860 BL1840B BL1850B BL1860B BL1820 etc. (The package does not contain batteries, you need to buy it yourself)
- Important note: This converter is not a charger, it only outputs voltage and power directly from the battery, please make sure the positive and negative wires of the device correspond to the positive and negative wires of the adapter when using it. If you have any questions, please feel free to contact us, we will give you a fully satisfactory answer within 24 hours.
- High-quality material: Our Makita 18V battery adapter is made of durable high-quality ABS plastic, injection molded, scratch-resistant, moisture-proof and corrosion-resistant, perfect for indoor and outdoor use.
- EASY TO USE: Slide in the battery and hear a "click" for a secure lock. The red wire connects to the positive terminal of the battery and the black wire connects to the negative terminal of the battery. The battery adapter has 4 screw holes for easy fixing with screws, so it can be easily attached to the power wheel. PLEASE NOTE: Do not connect the battery to the battery adapter when it is no longer in use, this may damage the battery.
9.1Excellent
View offer on:
Show more
7
LelukeeLelukee 2PCS DIY Adapter for Makita/Bosch 18V Battery,2Pcs Battery DIY Cable Connect Output Adapter Tool
Main highlights- Small and convenient: the adapter is small, lightweight, easy to carry, suitable for various tool modifications
- Note: This product is used as a power output tool and cannot charge the battery pack
- DIY tools: use spare batteries to power small fans and toys
- DIY battery modification tool: This power connector is compatible with Makita and Bosch 18V batteries.
- Compatible: the battery adapter is only compatible with Makita/Bosch 18V lithium-ion batteries
9.0Excellent
View offer on:
Show more
8
TPDL2 Pack Power Wheel for Makita 18V Battery Adapter, Power Wheel Battery Converter Kit with Fuses & 14AWG Wire & Control Switch Use for DIY Ride On Cars, Modified RC Toys, Rc Truck, Robotics
Main highlights- Quality and Safety: We have upgraded the wiring protection of the battery adapter with a 30Amp fuse to protect the device from damage caused by excessive power or short circuit. High quality silicone copper wire improves conductivity and safety, and heat resistant 14 AWG wire is suitable for high power applications. The adapter is also equipped with an on/off switch to ensure you can turn the battery on and off at any time.
- Perfect Compatibility: Perfectly fit for Makita 18V LXT battery BL1850B, BL1860B, BL1840B, BL1830B, BL1820B, BL1815 etc.
- Package Includes: 2x power wheel adapters, 14 AWG wire with fuse holderand, and 6x fuses. Battery not included.
- Important Notice: The red wire is connected to the positive, and the black wire is connected to the negative. When using, the two wires shouldn't be in touch. If you are not using an adapter, keep it separate from the battery.
- DIY Fun: The adapter comes with 14AWG heat-resistant wire, perfect for upgrading your power wheel toy cars, riding trucks, remote control toys, power tools, electric fans, LED strips, work lights, or robots to power them. Enjoy DIY Fun.
8.9Very Good
View offer on:
Show more
9
MAKBOSfor Makita for Dewalt Battery Adapter,MT20DL Battery Adaptor Compatible for Makita 18V Lithium-ion Battery Convert to Dewalt 20V Battery,DIY Converter for Dewalt 20V Cordless Power Tools
Main highlights- 【Material】Non-3D printed, sturdy and durable, lightweight and convenient, extend the life of the tool.
- 【Factory direct store after-sales】Package Includes:1*MT18DL Adapter (Battery not included). 30 days return and exchange, 180 days warranty.If you have any questions, please feel free to contact us and we will give our best to solve question.
- 【Compatible with Makita batteries】The MT20DL adapter is compatible with BL1830 battery, including BL1820, BL1830, BL1840, BL1850, BL1860, BL1840B, BL1850B, BL1860B, BL1890B, etc.
- 【Compatible with Dewalt 20V tools】This adapter can make listed lithium batteries use for DEW 20V lithium cordless power tools, and let you enjoy the advantages of extended run-time of Li-Ion Batteries on your existing 20V tools.
8.7Very Good
View offer on:
Show more
10
MAKBOS2Pcs for Makita 18V14.4V Battery for Power Wheel Adapter,Charger Power Connector for for Robotics,Rc Car DIY Use Converter for Makita Battery Power Station,with Fuse&Wire terminals Conversion kit
Main highlights- [Multi-scene use]- for Power wheels adapter has 14 gauge wire installed; You can use it to upgrade your power wheels, Rc toys,Rc Car Rc Truck Robotics DIY etc. Maximum permissible current 30A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY.
- [Fit for Makita 18-Volt Lithium-Ion battery]-Compatibility:This battery adapter that works for Makita 18V Li-ion battery only,replacement battery for Makita BL1830 BL1840 BL1850 BL1860 BL1840B BL1850B BL1860B BL1820 batteries.
- [Factory direct store after-sales]-Package Includes:2*DIY Adapter (Battery not included), 30 days return and exchange, 180 days warranty.If you have any questions, please feel free to contact us and we will give our best to solve question.
- [Easy to DIY operate]-The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better.DC input 18V------DC output 18V, Convert DC to DC
- [Better security]-The adapter is equipped with a fuse and high-quality silicone copper to prevent excessive transient current from damaging the battery and equipment, moreover, we use heat-resistance 14 AWG wire which own 30A max permissible current, you can use it safely.
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for makita 18v adapter diy
