10 Best Main Board Ps4 Jdm 020 In The Us - Black Friday 2024
Best Choice1
GinTaiGinTai Controller Ribbon Circuit Board Conductive Film Pad Replacement for Playstation 4 PS4 JDS-040, 50pcs
Main highlights- This product are tested before shipping.
- Special skill and techniques required for proper installation.
- Please make sure you are buying from GinTai.
- Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.
- 100% Brand new and high quality.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MelocyphiaMelocyphia Joystick Controller Function Motherboard for Playstation 4 PS4 Gamepad Mainboard (JDM-020)
Main highlights- Repair your broken, defected motherboard for PS4 game consoles.
- Please compare the pictures and descriptions carefully, check the model of your machine and make sure it is what you need.
- Package Contains: 1 x Motherboard
- Compatible Model: Playstation 4 PS4 JDM-020
- 5 versions optional: JDM-010, JDM-020, JDM-030, JDM-040, JDM-050/055
9.7Exceptional
View offer on:
Show more
3
ElecGearElecGear 2X USB C Charging Port PCB for 1st Gen PS4 Controller, Upgrade DS4 from Micro-USB Input Port to USB Type-C Connector Adaptor Replacement for JDS-001, JDS-011, JDS-030, Flex Cable Repair Tool
Main highlights- [What’s in Box] – 2x JDS-013C, 2x Flex Cables, Round File, Cutter, Pry Tools and Cross Screwdriver, Installation Guide in English
- [USB Type C vs. Micro-USB] –1. Compared with Micro-USB, USB C delivers a more stable connection. 2. The Type-C interface supports forward and reverse insertion, with no direction restrictions. 3. Unify the interface with other devices
- [Kindly Reminder] – 1. We designed two models for different DS4. The 013C model is for the 1st gen, while 045C is for the 2nd gen. It’s a must to check the model of your original JDS or the main board before ordering. 2. The USB port on the back plastic cover must be cut and enlarged, which voids the warranty. 3. Serious DIY skills required in the operation
- [JDS Charging Port with USB Type-C Port] – Replacement USB socket board work with PS4 controller. This new JDS-013C is a direct upgrade for original Micro-USB models: JDS-001, JDS-011 and JDS-030. The repair part fits the first gen of DS4 controller with main board: JDM-001, JDM-011, JDM-020 and JDM-030
- [For Problems] – JDS triangle socket board needs to be replaced: Insertion is loose, No connection, Disconnects from time to time, No charging, No LED. (Be noticed: You’d distinguish the problem from the charger, USB cable, internal battery and the main board before ordering.)
9.6Exceptional
View offer on:
Show more
4
eXtremeRateeXtremeRate 2 Pcs Replacement Flex Ribbon Circuit Board for PS4 Pro Slim JDM-050 JDM-055 Controller Conductive Film
Main highlights- Replace the conductive film to make your controller work again
- Perfect fitting & functionality of OEM Part is guaranteed
- Only compatible with PS4 Slim Pro Controller JDM-050/055, Check the second picture of the listing before purchase
- High quality brand new replacement part. Professional skills are needed
- Great replace that non-conductive, old, worn out, sticky conductive film with a brand new one
9.5Excellent
View offer on:
Show more
5
AcxicoAcxico 2Pcs JDS 001/011 PCB Circuit Board Ribbon Film Pad for PS4 Controller
Main highlights- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
- Simple installation.
- Package Included:2Pcs JDS 001/011 PCB Circuit Board Ribbon Film Pad For PS4 Controller(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
- Model: JDS 001/011
- Material: PCB Board
9.3Excellent
View offer on:
Show more
6
ElecGearElecGear Hall Joystick Kit Replacement for DualShock PS4 Controller, 2X Hall Effect Control Stick + 2X Calibration PCB + Desoldering Repair Tools for Analog Stick Thumbsticks – HL-PS4
Main highlights- [What’s in box Model: HL-PS4] – 2x Hall Joysticks, 2x Calibration PCB, 1x Heating Plate, 1x Solder Wick. (🔺Teardown screwdriver tools, USB input cables and wired/wireless controllers, other soldering tools and materials are required, however NOT included.)
- [Desoldering Tools included] – A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the most difficult task. It might is not suitable for newbies, though we added these helping hand in the kit
- [Compatibility and Reminder] – 1. Please carefully study the images for compatible controller. 2. The soldering iron must be more than 60W. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky. 4. 🔺Attention: When calibrating, wait at least 3 seconds after unplugged the USB cable before you plug it in again to re-power on the DS4 controller
- [2x Hall Effect Joysticks for PS4] – Hall thumbsticks Replacement for PS4 controller (DS4). With the electromagnetic hallstick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. (🔺Warning: Never use DS Tools on Github for it does not work with this MCU.)
- [2x Added-on Calibration PCB] – The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
9.2Excellent
View offer on:
Show more
7
eXtremeRateeXtremeRate Black Soft Touch Game Improvement Replacement Parts Back Housing Cover, Custom Bottom Shell Compatible with ps4 Controller JDM-040, JDM-050 and JDM-055
Main highlights- Personalized Feature: The matte black color looks great; Great smooth grip, soft in hand and feels good; Anti slip, sweat free for a long period game playing
- Package Includes: 1* Bottom Shell, 1* screwdriver and 5* screws. Important: The controller and other parts are not included
- Installation Skills Required: Required customers to take apart the controller to install this bottom shell; Required customers handy with controller installation. Get the installation video guide by searching “Extremerate replace bottom shell" or "YT1RwP4f33Y" on Youtube
- Fit Perfectly: Fit the best by far; Completely fits flush on all side; Sit properly on all the clips
- Compatibility Models: Check the second picture of the listing before purchase; If the light bar is in the edge of the touch pad, then take apart your controller and check the mainboard, this is only compatible with ps4 controller JDM-040, JDM-050 and JDM-055; This does not fit for JDM-001,JDM-011,JDM-020 and JDM-030
9.1Excellent
View offer on:
Show more
8
Melody SophiaRibbon Circuit Board Film Flex Cable for PS4 Dualshock 4 JDS-030 030 Controller Conductive Film Keypad Flex Cable PCB Joystick Buttons
Main highlights- We have 4 model options , when you make order , please choose the right model you need
- Specially and precisely design for PS4 JDS-030 030 Controller
- Qty: 1 x Conductive Film
- New Conductive Film Replacement Controller Button Ribbon Circuit Board For PS4 Controller
8.9Very Good
View offer on:
Show more
9
GinTaiGinTai Controller Ribbon Circuit Board Conductive Film Pad Replacement for Playstation 4 PS4 JDS-040, 30pcs
Main highlights- This product are tested before shipping.
- Special skill and techniques required for proper installation.
- Please make sure you are buying from GinTai.
- Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.
- 100% Brand new and high quality.
8.8Very Good
View offer on:
Show more
10
GMBYLBYGMBYLBY 4K Development Board GW1NSR-LV4C Board for Programmable Device 64Mbit PSRAM GW1NSR-LV4C
Main highlights- for engineers, hobbyists, and students alike, designed to cater to those who creating innovative digital solution and prototypes.
- Whether you're working home project or developing professional digital applications, this development board provides the versatility and reliability needed for a wide experimental scenarios.
- Unleash creativity with 4K Development Board, featuring the powerful Semiconductor series GW1NSR-LV4C for advanced digital projects.
- This compact and efficient board boasts an integrated systems in package chip programmable device and PSRAM memory, making for sophisticated hardware programming and development.
- The development board is small and exquisite in designed, which leading out all resource of chip, including USB downloading circuit and leading out all resource, which is convenient for developer to expand their use and is very suitable for the designed and experiment.
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for main board ps4 jdm 020
