10 Best Lora Mesh Esp32 In The Us - Black Friday 2024
Best Choice1
spec5Spec5 MiniTrekker LoRa Off-Grid Communicator - Compact, ATAK Enabled, 915 MHz LoRa ESP32 GPS, Mesh Connectivity, Rugged Design for Hiking, Camping, and Outdoor Adventures (Desert Sand)
Main highlights- Product Specification: S5 MiniTrekker, featuring an MCU: ESP32, LoRa Node Chip: SX1262, and a frequency of 915 MHz. Its compact dimensions are 83 mm x 39 mm x 20 mm, and weighs only 64 g. The device is powered by a 1 x 1200 mAh LiPo battery, equipped with a 915 MHz LoRa and GPS ceramic antenna. It boasts an urban range of approximately 1-3 miles and a rural range of around 3-5 miles. The battery life allows 3 hours of active use and 6 hours on standby. The case material is PETG, ensuring durability and ruggedness for outdoor adventures.
- Out of the Box Ready: The S5 MiniTrekker excels in simplicity and convenience, making it perfect for adventurers on the go. Right out of the box, this device is fully prepared for use—no complicated setup or lengthy configuration is required. Charge it, turn it on, and seamlessly integrate it into the Meshtastic network. With just the push of a button, you can easily send messages, share your location, and maintain communication, ensuring safety and connectivity during outdoor excursions.
- Meshtastic Ready: Pre-flashed and fully configured, the Spec5 MiniTrekker seamlessly pairs with your phone or tablet running the Meshtastic app. Effortlessly integrate into a mesh network for reliable, off-grid communication and location sharing, making it ideal for group coordination in remote or low-signal areas.
- Long-Range Connectivity: Utilizing the advanced Meshtastic technology, the S5 MiniTrekker enables low-power LoRa radio communication, making it an excellent choice for remote areas where traditional cellular signals may not reach.
- Introducing the ATAK-Enabled Spec5 MiniTrekker: Designed for explorers and outdoor enthusiasts, this compact communicator keeps you connected off-grid with powerful technology in a portable form. Engineered for convenience, it’s ready for use right out of the box, with lightweight construction that’s easy to attach to your gear. Featuring long-range LoRa communication, integrated GPS, and a rugged PETG build, the MiniTrekker is your essential companion for safe and reliable connectivity, whether hiking, camping, or venturing beyond cell coverage.
- GPS Integration: Stay connected and ensure your group’s safety with integrated GPS functionality. Sharing your location is easy and secure, allowing everyone in your team to stay oriented and coordinated, whether you’re navigating challenging terrains or working in isolated environments. GPS integration enhances situational awareness, helping your group remain on course.
- Durable PETG Construction: Designed with robust PETG material, the S5 MiniTrekker is engineered to endure tough outdoor conditions. This construction ensures resilience against impacts, wear, and harsh environments, guaranteeing reliable communication no matter where your adventures take you.
- Disclaimer: Our devices are fully compatible with the ATAK and Meshtastic apps for enhanced communication capabilities. Some setup may be required on your personal phone or device to ensure seamless connectivity. We encourage users to explore these configurations to maximize their experience fully. While we provide the tools for effective communication, any setup or troubleshooting related to the ATAK and Meshtastic apps remains the user's responsibility, allowing for a customizable device tailored to your needs.
- Built-In Battery for Extended Use: Equipped with a robust 1200mAh Lipo internal battery, the Spec5 MiniTrekker provides up to 3 hours of active use and 6 hours of standby time. This dependable power capacity ensures reliable communication for shorter outdoor excursions and quick off-grid adventures.
- ATAK Enabled: Spec5 has optimized this device for full compatibility with the ATAK (Android Team Awareness Kit) and Meshtastic apps, allowing seamless integration with your personal phone or connectivity device. Please note that setting up the apps on your device is required for full functionality.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
AYWHPAYWHP 3PCS ESP32 LoRa Development Board, LoRa V3 Meshtastic ESP32 WiFi, ESP32 LoRa V3 WiFi Bluetooth Dual Core 240MHz CP2102 Chip with 0.96" OLED Display 863-928MHz Antenna for Arduino
Main highlights- Supports Arduino Development: Supports ESP32 + LoRaWAN protocol. The Arduino library is a standard LoRa WAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol.
- Supports 868-915MHz band: It supports LoRa communication in 868-915MHz band, which is suitable for wireless communication requirements in different regions.
- Perfect Design: Integrated WiFi, Lora, Bluetooth, three types of network connections, laid WIFI, Bluetooth, and special 2.4GHz metal spring antenna.
- Easy to Use: Reserved IPEX (U.FL) interface for LoRa use. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing.
- 0.96inch OLED Display: The LoRa ESP32 development board is equipped with a 0.96-inch OLED display to show debugging information, battery operation and other information.
9.7Exceptional
View offer on:
Show more
3
MakerFocusMakerFocus ESP32 LoRa V3 Development Board with 2000mAh Battery, Protective Case, 915MHz Antenna Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino
Main highlights- Support Arduino Development Environment: Support ESP32 + LoRaWAN protocol Arduino library, this is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol
- Power Supply: We provide a 2000mAh battery with Micro JST1.25 plug, just plug and play, easy to use; you can also use the Type-C interface to power the development board, the interface with complete ESD protection, short circuit protection, RF shielding and other protection measures
- Perfect Design: Integrated WiFi, LoRa, Bluetooth three network connections, onboard WiFi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- OLED Display: Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information
- Easy to Use: With good RF circuit design and low-power design, WiFi LoRa V3 is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading and IoT developers
9.4Excellent
View offer on:
Show more
4
MakerFocusMakerFocus 2 Set ESP32 LoRa V3 Development Board with 915 MHz Antenna and Case Integrated WiFi Bluetooth SX1262 CP2102 0.96-inch OLED Display Type C for Meshtastic IoT Arduino Intelligent Scenes
Main highlights- Support Arduino Development Environment: Support ESP32 + LoRaWAN protocol Arduino library, this is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol
- Power Supply: Onboard SH1.25 battery interface, integrated lithium battery management system; You can also use the Type-C interface to power the development board, the interface with complete ESD protection, short circuit protection, RF shielding and other protection measures
- Perfect Design: Integrated WiFi, LoRa, Bluetooth three network connections, onboard WiFi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- OLED Display: Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information
- Note: Not all LoRa antennas fit the case. If the antenna protective shell is too long and cannot be installed into the shell, please shorten the antennas protective shell and be careful not to damage the internal copper tube
- Easy to Use: With good RF circuit design and low-power design, ESP32 development board is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading and IoT developers
- 2pcs WiFi LoRa 32: When use WiFi LoRa 32, you can use 2 pieces together. One is used for receiving and another one is used for sending
9.1Excellent
View offer on:
Show more
5
Heltec AutomationHeltec WiFi LoRa ESP32 Meshtastic IOT Wireless Stick V3 LoRaWAN Node Development Kit Heltec V3 for Mesh Network Low Power Board 433MHz 863-870MHz 902-928MHz with 0.49-inch OLED Display (863-870MHz)
9.0Excellent
View offer on:
Show more
6
MakerHawk2 Pack ESP32 LoRa V3 915 MHz Board with 0.96inch OLED Display 4 Signal Enhancement Antenna and SX1262 Case for Meshtastic Arduino LoRawan IOT
Main highlights- Versatile Display and Protocols: Featuring a 0.96" OLED screen for clear display, our board supports WiFi and Bluetooth protocols, allowing for versatile applications. Its low-power design is ideal for energy-efficient projects
- High-Performance Hardware: Power through your projects with a high-frequency 240MHz main processor, 8Mbyte FLASH, and the Xtensa 32-bit LX7 dual-core processor. The ESP32-S3FN8 main control chip and SX1262 LoRa chip ensure reliable and efficient performance
- Extended Communication Range: Experience an impressive communication range of up to 2.8KM in open areas with our board’s support for frequency bands 915MHz. The Cp2102 USB to serial chip enhances connectivity options
- Developer-Friendly Design: Crafted for creators, our board is Arduino-compatible, supports a working voltage of 3.3~7V, and operates within a temperature range of -20~70°C. With a receiver sensitivity of -139dbm (Sf12, 125KHz), it’s designed for developers who demand precision
- Advanced Connectivity: Unleash the power of wireless communication with our ESP32 LoRa Development Board. Equipped with 4 newly upgraded spiral antennas, the signal is better.Equipped with a LoRa module, ESP32 chip, and Meshtastic compatibility, it’s perfect for IoT projects requiring long-range and low-power connectivity. Supports both LoRaWAN standard protocol and dual-mode Bluetooth
8.9Very Good
View offer on:
Show more
7
DIYmallDIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Main highlights- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- Upgraded V3 version has better impedance matching of RF circuits
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
8.8Very Good
View offer on:
Show more
8
Heltec AutomationHeltec WiFi LoRa 32 V3 Development Board 433MHz 863-870MHz 902-928MHz with SX1262 and ESP32-S3FN8 Chip 0.96 Inch OLED Display Meshtastic Mesh Network Paxcounter Support Heltec V3 (902~928MHz)
Main highlights- With good RF circuit design and low-power design.
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
- Support the Arduino development environment.
- SX1262 LoRa node chip.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
- Onboard 0.96-inch 128*64 dot matrix OLED display can be used to display debugging information, battery power, and other information.
- Microprocessor: ESP32-S3FN8 (Xtensa 32-bit LX7 dual-core processor, five-stage pipeline rack Structure, frequency up to 240 MHz).
- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use.
- Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.
8.7Very Good
View offer on:
Show more
9
MakerHawk2 Pack ESP32 LoRa V3 Development Board + Protect Case Set - with 915MHz Antenna and SX1262 LoRa V3 Devices for Meshtastic Arduino LoRawan IOT
Main highlights- Versatile Display and Protocols: Featuring a 0.96" OLED screen for clear display, our board supports WiFi and Bluetooth protocols, allowing for versatile applications. Its low-power design is ideal for energy-efficient projects
- Specially Designed Protective Case: The specially designed protective case can accommodate the ESP32 LoRa V3 development board, a copper tube antenna and 950mAh, 1100mAh and smaller batteries, providing a tight fit to ensure compatibility and safety. With transparent screen protection and Type C interface.
- High-Performance Hardware: Power through your projects with a high-frequency 240MHz main processor, 8Mbyte FLASH, and the Xtensa 32-bit LX7 dual-core processor. The ESP32-S3FN8 main control chip and SX1262 LoRa chip ensure reliable and efficient performance
- Extended Communication Range: Experience an impressive communication range of up to 2.8KM in open areas with our board’s support for frequency bands 915MHz. The Cp2102 USB to serial chip enhances connectivity options
- Developer-Friendly Design: Crafted for creators, our board is Arduino-compatible, supports a working voltage of 3.3~7V, and operates within a temperature range of -20~70°C. With a receiver sensitivity of -139dbm (Sf12, 125KHz), it’s designed for developers who demand precision
- Advanced Connectivity: Unleash the power of wireless communication with our ESP32 LoRa Development Board. Equipped with a LoRa module, ESP32 chip, and Meshtastic compatibility, it’s perfect for IoT projects requiring long-range and low-power connectivity. Supports both LoRaWAN standard protocol and dual-mode Bluetooth
8.6Very Good
View offer on:
Show more
10
Heltec AutomationHeltec WiFi LoRa ESP32 Meshtastic IOT Wireless Stick V3 LoRaWAN Node Development Kit Heltec V3 for Mesh Network Low Power Board 433MHz 863-870MHz 902-928MHz with 0.49-inch OLED Display (433MHz)
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for lora mesh esp32
