Lna Wireless Module Nrf24l01s of 2025
Best Choice1
EBYTEEBYTE 2.4GHz Wireless Module TTL Auto Frequency Hopping 27dBm PA+LNA 500mW 5000m Wireless Transceiver RF Module UART nRF24L01+ E34-2G4H27D SMA-K Antenna
Main highlights- Support automatic packet retransmission after packet loss; Support fixed-point transmission, easy to start network communication
- Support 3.3V~5.5V power supply, power supply over 5.0 V can guarantee the best performance; Industrial grade standard design, support -40 ~ 85 °C for working over a long time. With SMA-K connector, easy connection of IPEX cable or external antenna.
- Features: Support automatic frequency hopping, greatly improve communication anti-interference ability; Support fixed frequency communication, fast transmission speed and low latency
- Built-in PA+LNA with 500mW power, communication distance tested is up to 5km; It works at ISM 2.4GHz; Air data rate: 250k?2Mbps; With advanced GFSK modulation
- Application: Home security alarm and remote keyless entry?Smart home and industrial sensors?Wireless alarm security system; Building automation solutions?Wireless industrial-grade remote control?Health care products?Advanced Meter Reading Architecture(AMI)? Automotive industry applications.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
RuitutedianziRuitutedianzi 8Pcs NRF24L01+PA+LNA Wireless Module with Antenna 1100 Meters Long Distance with NRF24L01 Wireless Module Adapter 3.3V
Main highlights- You can easily with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this NRF24L01+ module is designed with power amplifier and SMA antenna, this allowed you the wireless communication up to 800+ meters! (No barrier)
- The on-chip voltage regulator accepts supply voltages from 1.9 to 3.6V. The module has 5V tolerant inputs that allow for direct connection of SPI pins to the (compatible with) for arduinoIDE.
- Internal filtering results in high margins of meeting RF regulatory standards. The module radio uses Gauss Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
- If you want to make your wireless communication system with low cost, this Wireless Transceiver module is the most suitable module to choose! It can achieve a good balance between wireless transition performance and cost!
- A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible via the SPI connection. Configurable parameters include channel frequency (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
9.6Exceptional
View offer on:
Show more
3
UMLIFEUMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino
Main highlights- The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module; 5* SMA Antenna 2.4G 1100m; 5 * NRF24L01+ Breakout Adapter
- RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module.
- It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc.
- 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers
- 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module
9.4Excellent
View offer on:
Show more
4
MakerFocusMakerFocus 3pcs nRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module 2.4G 1100m with Antenna and 3pcs NRF24L01+ Breakout Adapter with 3.3V Regulator on-Board for Arduino
Main highlights- nRF24L01+ Module: High-performance wireless data transmission chip nRF24L01 +, an increase of high-power PA and LNA chips, RF switches, band-pass filters and other professional full bidirectional RF, making the effective communication distance has been greatly expanded; It is 2.4GHz ISM band transceiver for Arduino, which has the abilities of auto-acknowledge and auto-retransmit and support up to six channels of data reception
- nRF24L01 Breakout Adapter: Arduino and Raspberry Pi compatible, Allows for easy connection to Arduino; Small power on SMD LED indicator; On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached "nRF24L01+" module
- Widely Application: It can be wildly used to wireless communication between modules, such as wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc
- Package Content: This is an easy-to-use combination product for customers. The packing list includes: 3 * nRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module; 3 * SMA Antenna 2.4G 1100m; 3 * nRF24L01+ Breakout Adapter
- Instruction Manual: Please get the example link from Product guides and documents below
9.3Excellent
View offer on:
Show more
5
Atnsinc2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator
Main highlights- RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module.
- Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter
- NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities; Support up to six channels of data reception; the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded.
- Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc.
- A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
9.0Excellent
View offer on:
Show more
6
EC BuyingEC Buying 2Pcs E01-ML01DP5 Wireless Transmission Module nRF24L01P+PA+LNA 2.4G Wireless Transceiver Module 20dBm 100mW 2000m Measured Distance SPI Interface with Antenna
Main highlights- Under ideal conditions, the communication distance can reach 25km; Professional RF shielding cover, anti-interference and anti-static
- Supports 2.0-3.6V power supply, with power supply greater than 3.3V ensuring optimal performance; Supports 2Mbps, 1Mbps, and 250kbps air rates; Maximum transmission power 100mW
- Reserve 4 fixing holes for module welding and fixation; SMA-K external thread inner hole, convenient for connecting coaxial cables or external antennas
- E01-ML01DP5 is a 2.4G wireless module that is a commonly used nRF24L01+PA+LNA RF module with an SPI interface, suitable for various application scenarios
- 125 communication channels to meet the application requirements of multi-point communication, grouping, frequency hopping, etc; Connect to MCU through SPI interface, with a speed of 0-10Mbps
8.8Very Good
View offer on:
Show more
7
AITRIP3pcs Wireless Transceiver Module, RF Transceiver Module, 2.4G 1100m NRF24L01+PA+LNA SMA Antenna for Raspberry Pi Arduino KY67
Main highlights- The wireless transceiver module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
- The nRF24L01+ is a 2.4GHz ISM band transceiver; Auto-acknowledge and auto-retransmit abilities
- The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
- Range: 800+ meters line of sight, Weight: 13.28 g (0.468 oz)
- Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation
8.6Very Good
View offer on:
Show more
8
diymorediymore 3PCS NRF24L01+PA+LNA Transceiver Module with SMA Antenna 2.4 GHz 1100m+3PCS NRF24L01 8 Wireless Module Development Board Compatible with Arduino
Main highlights- Small power on SMD LED indicator,On-board 3.3V voltage regulator,which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+"module.
- On-board AMS1117-3.3 chip,with Auto-acknowledge and auto-retransmit function.Is module has 5V tolerant inputs,support up to six channels of data reception ans allows for direct connection of SPI pins to the A rduino.
- NRF24L01 has 125 selectable channels (frequencies) +PA+LNA,this group module not susceptible to interference from other devices,High stability of the work.
- It can be wildly used to wireless remote control,somatosensory devices,RFID,NFC,smart grid,smart home,wireless audio etc.Good idea for your DIY Project.
- 3PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna:Built-in 2.4Ghz antenna: available software to set the address,only received local address when output data(Provide interrupt instruction),can be directly connected to a variety of microcontrollers.
8.4Good
View offer on:
Show more
9
DiitaoDiitao 2PCS NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4 GHz 1100m with 3.3V Regulator on-Board 8 Pin Socket Breakout Adapters for Arduino
Main highlights- Range: 800+ meters line of sight;5V tolerant inputs;
- Package Includes:2 NRF24L01+PA+LNA Wireless Transceiver Module and 2 SMA Antenna.
- NRF24L01:A single chip radio transceiver for 2.4-2.5 GHz ISM band.For Arduino and for Raspberry Pi.
- Feature:High transmission efficiency and stability,with auto-acknowledge and auto-retransmit,support up to six channels of data reception.
- Application:For wireless communication between modules,wireless peripherals, remote control systems, wireless voice transmission, wireless sensor networks,smart home.
8.2Good
View offer on:
Show more
10
MakerfireMakerFocus 10pcs NRF24L01+ 2.4GHz Wireless RF Transceiver Module Compatible with Ar duino Raspberry Pi
Main highlights- ★nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Ar duino and Raspberry Pi
- ★You can find several resources available online easily,such as tutorials, data sheets, and notes
- ★Ultra small: 15x29mm (including:built-in 2.4GHz antenna),for easy implementation into designs without additional hardware
- ★Auto-acknowledge and auto-retransmit function
- ★Applications: Wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation
8.0Good
View offer on:
Show more
Similar products on Amazon
