Linear Guide Cross Slide Tables of 2025
Best Choice1
RATTMMOTORRATTMMOTOR ZBX150-200mm/7.874" Stroke CNC Linear Stage Motion Actuator X/Y/Z Axis Cross Sliding Table Double Linear Slide Rail Guide 1605 Ballscrew with Limit Switch+Motor Mount Bracket for CNC Router
Main highlights- Using high-quality aluminum alloy material, beautiful, rust-roof, wear resistant and durable. The latest batch of motor mounts on the shelves have been updated, and the one you receive may also be the latest batch of heavy duty linear stage.
- Scew: SFU 1605 ballscrew, diamater is 16mm,auucracy is up to 0.03mm.
- Package Include: 1× 200mm Travel X/Y/Z Axis Cross Sliding Table Linear Slide Rail Guide + 2×Limit Switches + 1×Motor Mount Bracket (without motor).
- Guide rail: 20mm square linear rail, hight-speed silent, running smoothly.
- Effective Stroke: 200mm; Horizontally loadable: 120kg; Vertical carrying: 50kg; Width: 150mm.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
YIDOFENGYIDOFENG 600 mm Stroke CNC Linear Stage Motion Actuator,X Y Z Axis Linear Slide Rail Cross Sliding Table Linear Rail Guide, SFU1605 Ballscrew with Nema23 Stepper Motor for CNC
Main highlights- 【SFU1605 BALL SCREW】Using bearing steel material,high efficiency and low noise.Effective travel length: 100mm / 3.94inch. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.003mm.
- 【PACKAGE COMPONENT 】Nema23 stepping motor + step motor support + motor flange + flange + connector + 1605 ball rod + 12mm double track + slide + base. Horizontal load weight 80kg / 176.37 lb; vertical load weight 20kg / 44.09 lb.
- 【NEMA23 STEPPER MOTOR】Motor size: 57 * 57 * 56mm; torque: 1.26N.m; current: 3A; shaft: single out shaft; voltage: 12-36V (typical value 24V); control mode: pulse control; output speed: 1000 RPM (within 600 RPM).Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
- 【DOUBLE LINE RAIL SLIDING TABLE DESIGN】HGW12 straight track+HGW12 straight track slide: 12mm double track straight track, the track adopts Gothic structure, the contact Angle is 45°, can achieve the load effect of square using large steel ball, which can improve the load capacity and give full play to the excellent ability of the product. The bottom surface and end surface of the slider guide rail have a fully sealed dust-proof design. After strict processing, the high temperature and low temperature resistance can be up to 80 ℃
- 【APPLICATION】The CNC Linear Stage Motion Actuator are suitable for production line automation, packaging automation industry, laser cutting equipment, spraying equipment, medical equipment, dispensing solder and 3D printing and other equipment.
- 【AFTER SALES SERVICE】 If you get stuck, Contact us with any questions that arise. Our customer service team is always ready to assist with any questions you may have.
9.7Exceptional
View offer on:
Show more
3
TOAUTOLinear Stage Actuator 200mm Manual Sliding Table Ballscrew 1605 Linear Guides Cross Slide Table SFU1605 Travel Length L100/200/300/400/500/600mm (200mm)
Main highlights- The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
- Stroke: 100mm/200mm/300mm/400mm/500mm/600mm(optional)
- Sliding table height: 66mm, width: 93mm, floor thickness: 11mm
- Rounded front and rear plate design, precision hole position processing.
- Ball screw accuracy: C7
9.4Excellent
View offer on:
Show more
4
SHOWLIVEUManual Linear Stage Actuator Sliding Table Ballscrew XYZ Axis Linear Guides Cross Slide Table SFU1605 Travel Length (400MM/15.74INCH, 1)
Main highlights- The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
- Stroke：200mm (Such products without motor and coupling ) / 400mm
- Sliding table height: 66mm, width: 93mm, base thickness: 11mm. Material: Aviation Aluminum 6061. The sliding table is equipped with hand wheel, and lock
- Repeat positioning accuracy: ± 0.05mm. Mobile panel size: 60mm * 115mm
- Ball screw type: 1605. Ball screw accuracy: C7
9.2Excellent
View offer on:
Show more
5
RATTMMOTORRATTMMOTOR ZBX80 400mm Stroke CNC Linear Stage Motion Actuator X Y Z Axis Linear Slide Rail Aluminum Alloy Cross Sliding Table Linear Rail Guide SFU1605 Ballscrew+Nema23 57 Stepper Motor for CNC
Main highlights- 【ZBX80-400mm load capacity】Material: Aluminum Alloy; Effective Stroke: 400mm/15.75 inch; Horizontally loadable: 80KG / 176.37 lb; Vertical carrying: 20KG / 44.09 Ib; Width: 80mm/3.15 inch.
- 【ZBX80 Size】Total length of the linear Motion Actuator including the stepper motor : 630mm/24.8 inch; Total length of the base plate without motor and bracket: 519mm/20.43 inch.
- 【Stepper motor bracket】Add the motor support seat, ensures the coaxiality of the fixed end and prolongs the service life of the motor, screw and coupling;Three-sided closed design effectively reduces dust and dirt from entering the interior of slide, reducing the frequency cleaning, prolonging its life.
- 【Nema23 hybrid stepper motor】Motor size: 57 * 57mm * 56mm, Torque: 1.2N.m; Step angle: 1.8°; Current: 3A; Phase inductance: 3.8mH; Phase resistance: 1.1Ω; Shaft: single out shaft; Voltage: 12-36V (typical value 24V); Control mode: pulse control.
- 【High precision ballscrew screw】Bearing steel material, under the premise of guarantting the accuracy of the screw surface chrome-plated to increase the hardness of the screw and improve the load-bearing performance of the slide.
- 【Coupling】Grade 9 high-strength bolts, good locking force, not easy to slip at the cut joints. R-type rounded corners to avoid concentrated stress at the joints; The tolerance of inner diameter is controlled within H7 precision, high concentricity, no gap transmission efficiency by 40%.
8.9Very Good
View offer on:
Show more
6
NeNchengLiManual Linear Actuator Sliding Table Linear Guide Sliding Table Linear Stage Actuator Cross Slide Table Linear Slide Guide Rails Ball Screw Guide Sliding Table W/Handwheel, Stroke 200/900mm (900mm)
Main highlights- 【Wide Application】This is a high-quality sliding table with handwheels,which can be used to measure your daily needs.The panel is cnc finishing,and the side of the profile can be installed with nuts.It is easy to use and durable.
- 【Product Parameter】Ball screw type:1605(diameter 16mm,lead 5mm,1610 screw/1620 screw can be replaced.), Aluminum profile(width*height):40x20mm, panel size(width*length): 48x45mm,front panel height 83mm,rear panel height 73mm.
- 【High Precision】Manual linear actuator with high precision, high efficiency, long life, low coefficient of friction. Ball screw accuracy: C7, repeat positioning accuracy:±0.02mm, stroke:200mm/900mm.
- 【Easy to Use】Linear guide sliding table can withstand the load in all directions, long service life. For large-scale transmission equipment including industrial robots, cnc machine and supporting devices, etc.
- 【Durable Materail】Linear stage actuator is made of high quality aviation aluminum 6061, strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
- NOTE: Power distribution:86 stepper motor,servo motor(customer needs different,flexible configuration, MOTOR NOT INCLUDED)
8.8Very Good
View offer on:
Show more
7
RATTMMOTORRATTMMOTOR ZBX100-600mm Stroke CNC Linear Stage Motion Actuator, Double Optical Axis X Y Z Axis Linear Slide Rail Aluminum Alloy Cross Sliding Table SBR16 Linear Rail Guide SFU1605 Ballscrew for CNC
Main highlights- Using high-quality aluminum alloy material, beautiful, rust-roof, wear resistant and durable.
- Scew: SFU 1605 ballscrew, diamater is 16mm,auucracy is up to 0.03mm; Guide rail: SBR with seat rail 16 heat-resistant design.
- Package Include: 1× 600mm Travel X/Y/Z Axis Ballscrew 1605 Double Optical Axis Linear Rail Guide Manual Slide with Nema23 Stepper Motor and bracket.
- M5 movable nuts on the sides and M5 momovable nuts on the bottom for convenient and flexible installation.
- Effective Stroke: 600mm; Horizontally loadable: 120kg; Vertical carrying: 30kg; Width: 100mm.
8.7Very Good
View offer on:
Show more
8
RANZHIX4“ SFU1605 Manual Sliding Table 100mm Stroke Ballscrew Linear Rail Guides Cross Slide Table CNC Linear Guide Stage Actuator Motorized 57 Step Motor
Main highlights- 【SPECIFICATIONS】Maximum load: <20kg, linear axis: 16mm (diameter), motor standard: 57 stepper motor, repeat positioning standard: ±0.03, effective stroke: 100mm/3.9inch.
- 【PRECISION PROCESSING】Standard aluminum alloy profile structure, surface sandblasting, beautiful and rust-proof, precision CNC machining of holes.
- 【PRECISE AND CONVENIENT】This sliding table is easy to use, and can directly fold the cross sliding table and the gantry sliding table. Round front and rear plate design, precise hole position processing.
- 【POINTER WITH BRACKET】The linear motion actuator is equipped with a mounting bracket and a high-definition ruler, and the laser engraving hand wheel with a pointer is divided into 360 equal parts.
- 【EXCELLENT INTEGRITY STORE】We are high-quality and honest sellers, and we will help you solve all problems. We are committed to provide best service for every customer.Please rest assured to purchase!
8.6Very Good
View offer on:
Show more
9
YWBL-WHAluminum Alloy Linear Stage Table KA80-1402-50 Manual Sliding Table Cross Linear Slide Rail for CNC (50mm)
Main highlights- WIDE APPLICATION---The linear stage table is widely used in production machinery, inspection equipment, optical laboratory precision measurement, fine-tuning displacement, mechanical equipment positioning and movement
- TABLE SIZE---The linear stage table is of 80×80mm table size, with high quality, accurate machining, stable performance, and good using effect
- SMALL FRICTIONAL RESISTANCE---The linear stage table is of small frictional resistance, of linear motion
- HIGH-PRECISION MOVEMENT---The linear stage table uses accurate cross screw slides, helping to achieve high-precision smooth movement
- EXCELLENT PHYSICAL ADVANTAGE---Made of aluminium alloy material with anodized surface, high strength, the linear stage table is of wear and good
8.5Good
View offer on:
Show more
10
LIYUANJUNLIYUANJUN 200MM Linear Rail Sliding Cross Slide Actuator Manual Hand Wheel Module Sliding Table Manual Guide Rail SFU1605 Sliding Table (Ball Screw Accuracy: C7)
Main highlights- The sliding table is equipped with hand wheel, and lock.
- The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
- Stroke: 200mm/7.87inch; Repeat positioning accuracy: ± 0.05mm
- Mobile panel size: 60mm * 115mm/2.36*4.52inch; Material:Aviation Aluminum 6061
- Ball screw type: 1605; Ball screw accuracy: C7; Sliding table height: 66mm/2.59inch, width: 93mm/3.66, base thickness: 11mm/0.43
8.2Good
View offer on:
Show more
Similar products on Amazon
