10 Best Led 5mm 12v Yellow In The Us - Black Friday 2024
MALIIGAZA Golden Yellow 12V COB LED Strip Lights, Flexible Gold Amber Color 5mm LED Tape Rope Light, 5m 16.4ft Decorative LED Ribbon for Office Home Indoor Decor (DC12V, Without Power Supply)
Main highlights- 【Ultra Thin LED Strip】0.2in/ 5mm super narrow led light strip, without extra edge, lighting is very beautiful than other led strips.
- 【Safe Use & Easy Installation】MALIGAZA COB LED strip works at DC 12V or 24V low voltage, without any hazard to humans. With strong adhesive tape on the back of the LED strip, makes it very easy to install the LED tape on any smooth clean surface.
- 【High Brightness】MALIGAZA Golden Yellow COB Strip is with 384LEDs/m high density of led chips, high light efficacy, very bright but save power.
- 【Flexible & Cuttable LED Strip】MALIGAZA COB strip is very much flexible, it can be bent or folded to any shape. The led tape is cuttable, can DIY any ideal length.
- 【Dotless Lighting】MALIGAZA COB LED strip light has no dark area, no lighting spots, the lighting is much more uniform and more beautiful than SMD LED strips.
- Curious about how we select the top products for you? Explore How It Works
DiCUNO 100Pcs 5MM Pre Wired 12V Yellow Light LED Diodes, 9.4 Inch/24CM Ultra Bright Light Emitting Diodes Assorted Color Kit Box for Circuit Science Experiment, DIY Lighting Projects
Main highlights- [Note]: In order not to damage the diodes, please DO NOT use them at voltage over 12V. The diode would dim as the voltage reduces, but we do not recommend voltage lower than 9V.
- Long wire of 9.4 Inch/24CM, made up of 7 pure copper wires, can be cut according to your multiple needs.
- Firm, low voltage loss and little heat generation. Resistance: 500Ω; Current: 20mA; Package Quantity: 100 pieces (discrepancy: ±1%)
- DiCUNO pre-wired 12V 5MM transparent LED light diodes. Light Color: Yellow (Positive wire: The one without resistor. Please refer to picture 3.)
- Application: Used most commonly for DIY lighting projects, science circuit experiments, signal indicators, etc.
EDGELEC 50pcs 12 Volt 5mm Yellow LED Lights Emitting Diodes, Pre Wired 7.9 Inch DC 12V LED Light Diffused Colored Lens Small LED Lamps
Main highlights- Widely Applicable: DIY Hobby, Electronic Project, Decoration, Instruction And Lighting…
- Product Parameters: The Anode: Yellow Wire / The Cathode: Black Wire / Forward Voltage: DC 12V / Forward Current: 20mA / LED Viewing Angle: 120°
- Product Overview: 50pcs Prewired 5mm Yellow LED - Yellow Lens (Diffused)
- Product Features: Prewired LED For DC 12V (Preloaded 1/4w Metal Film Resistor) - 7.8 inch Wire Lead (7-Core Pure Copper & Tin-Coat At The End)
- Prewired with built in Resistor, 20000 hours+ Lifespan.
CHANZON 20 pcs Pre-Wired 5mm Yellow LED Diode Lights (Clear Round Transparent Lens DC 12V) with 680 ohms 1/4W Resistor and 24awg Wire Indicator Light Emitting Diodes Lighting Bulb 5mmled
Main highlights- Wire Detail: 24awg Tin-Coated Pigtail, Length: 7.9inch / 20cm, Resistor: 680 Ω ohms 0.25W 1/4W(discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre-Soldered with cable
- Voltage: 12 V(5V 6V 9V 12vdc for Different Brightness), Current: 20mA, Wattage: 0.24W( 0.25W ), Polarity: Anode "+" (Yellow Wire) | Cathode "-" (Black Wire) leddiode
- Overview: Single Color Yellow, Colour: 588-592nm (590nm 591nm), Luminous Intensity(Brightness): 1500-2000 mcd , Viewing Angle: 30 Degrees ,Clear Transparent Round 5 mm Small Lens
- Compatible with: DIY lighting project (illuminant keyboard, luminous toy and cards), science circuit experiments, signal emmiting indicator,miniature parts replacement, dollhouse, electronics hobby
- Are you looking for a Led Diode Bright Enough With Correct Resistor (±1% Tolerance) Pre-Wired, 24awg Copper Wires Soldered by Machine(NO Hand Soldering) that WILL NOT Come Apart Easily, A Perfect Replacement for your Dash and Control Illumination.
EDGELEC 30pcs 12 Volt 5mm Yellow LED Lights Emitting Diodes Pre Wired 7.9 inch DC 12v LED Light Clear Lens Small LED Lamps
Main highlights- Widely Applicable: DIY Hobby, Electronic Project, Decoration, Instruction And Lighting…
- Product Parameters: The Anode: Yellow Wire / The Cathode: Black Wire / Forward Voltage: DC 12V / Forward Current: 20mA / LED Viewing Angle: 30°
- Product Overview: 30pcs Pre-wired 5mm Yellow LED - 5mm Clear Lens
- Product Features: Prewired LED For DC 12V (Preloaded 1/4w Metal Film Resistor) - 7.8 inch Wire Lead (7-Core Pure Copper & Tin-Coat At The End)
- Prewired with built in Resistor, 20000 hours+ Lifespan.
CHANZON 20 pcs Pre-Wired 5mm Yellow LED Diode Lights (Round Diffused Frosted Lens DC 12V) with 680 ohms 1/4W Resistor and 24awg Wire Indicator Light Emitting Diodes Lighting 5mmled
Main highlights- Wire Detail: 24awg Tin-Coated Pigtail, Length: 7.9inch / 20cm, Resistor: 680 Ω ohms 0.25W 1/4W(discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre-Soldered with cable
- Voltage: 12 V(5V 6V 9V 12vdc for Different Brightness), Current: 20mA, Wattage: 0.24W( 0.25W ), Polarity: Anode "+" (Yellow Wire) | Cathode "-" (Black Wire) leddiode
- Overview: Single Color Yellow, Wave Length: 588nm-592nm (590nm 591nm), Luminous Intensity(Brightness): 1000-2000 mcd, Viewing Angle: 20 Degrees ,Frosted Round 5 mm Small Lens
- Compatible with: DIY lighting project (illuminant keyboard, luminous toy and cards), science circuit experiments, signal emmiting indicator,miniature parts replacement, dollhouse, electronics hobby
- Are you looking for a Led Diode Bright Enough With Correct Resistor (±1% Tolerance) Pre-Wired, 24awg Copper Wires Soldered by Machine(NO Hand Soldering) that WILL NOT Come Apart Easily, A Perfect Replacement for your Dash and Control Illumination.
Bowerful 50pcs 12V 5mm Yellow/Amber LED 9V - 12V Gauge Cluster Instrument Light Emitting diodes
Main highlights- Voltage: 12V LEDs work with 9-12V battery systems
- Power: Battery-powered LEDs allow flexible placement
- Dimensions: Round LEDs measure 5mm in diameter
- Color: Amber Yellow LEDs provide a warm, inviting glow
- Brand: Bowerful offers quality instrument lights at an affordable price
CHANZON 5 pcs 8mm Panel Mount + 5mm LED Colored Yellow Pilot Diode Light (Diffused Round Lens) 12V Universal Flush Mount Dash Board Indicator Panel Socket Lights Bulb Lamp for Cars Boats
Main highlights- Voltage: 12 V(5V 6V 9V 12vdc for Different Brightness), Current: 20mA, Wattage: 0.24W( 0.25W ), Polarity: Anode "+" (Yellow Wire) | Cathode "-" (Black Wire) leddiode
- Resistor: 680 Ω ohms, 1/4W 0.25W (discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre Soldered Wired with Cable
- Mount Hole Diameter: 0.31 inch / 8mm (drill an appropriate sized hole around 8 mm) Wire Detail:24awg Pre Wired, Length: 7.9inch / 20cm
- Led Overview: Single Color Colored Yellow, Colour: 588nm-592nm (590nm 591nm), Luminous Intensity(Brightness): 1000-2000 mcd , Viewing Angle: 20 Degrees, Frosted Round 5 mm Small Lens
- Compatible with: Panelmount Dash Board Indicator,Car Lighting,Footwell,grill,Brake Light,Turn Signal Light,Boats,Architectural Lighting,DIY Hobby,Replacement Bezel Clip Holder,
Juasky 60pcs Pre Wired Led Diode Lights 12v,Yellow Pre Wired Led 5mm,Led Light Emitting Diodes for DIY Scientific Experiment
Main highlights- Yellow Lights: The lens color is clear and emits a yellow light.
- Wide Application:This type of 5mm pre wired led is widely used in school science experiments, signal indicator lights, Christmas stage lighting decoration,display screens, LED light DIY, and electronic and electrical experiments.
- Welding Firmly: Machine welding, pre wired copper wire, composed of 7 pure copper wires, sturdy, low voltage loss, and less heat generation.
- High Quality Chips:The pre wired led diode lights 12v are all made of high-quality chips, which have higher brightness, are safer and more energy-efficient. At the same time, epoxy resin is used, which has high color rendering performance and can withstand high temperatures to prevent bursting and extend the service life.
- 5mm Pre Wired Led Lights:Round head,head diameter: 5mm. The working voltage of diode led is 12v and the working current is 20mA.
30pcs 12 Volt 3mm 5mm Round Flat top LED Lights Emitting Diodes Pre Wired 7.9 Inch DC 12V LED Light Water Clear Lens Small LED Lamps (5mm Flat top, Yellow (30pcs))
Main highlights- [Working principle] Operating voltage: 12V DC, maximum current limit: 20mA. Please connect the red wire to the positive terminal and the black wire to the negative terminal.
- [Widely Used] These pre-wired LED beads can be used in automobiles, motorcycles, signal flasher, toy cars, remote control aircraft, model flasher, and other luminous beads that require product function indicator.
- [Time Saving] Pre-wired LED diode with 20cm wire, no need to solder to make it bright, save DIY time.
- [Package Contents] Pre-wired LED diodes: 30pcs LED diodes
- Wire Detail: 24awg Tin-Coated Pigtail, Length: 7.9inch / 20cm, Resistor: 680 Ω ohms 0.25W 1/4W(discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre-Soldered with cable
Black Friday Sale
Deal ends in
HrsMinSec