10 Best Lcd I2c Oled 128x128 In The Us - Black Friday 2024
XIITIA 2pcs 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 (White Light)
Main highlights- ★SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5.
- ★For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- ★Driver IC: SSD1309
- ★Diagonal Screen Size: 2.42 inch
- ★2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
- Curious about how we select the top products for you? Explore How It Works
DORHEA 10PCS 0.91'' 12832 IIC I2C OLED Display Module 0.91inch I2C 128x32 SSD1306 LCD Display Module Blue I2C OLED Screen Driver DC 3.3V/5V with 4 Pin Headers
Main highlights- The I2c OLED display performance is better than the traditional LCD display, also lower consumption, high resolution OLED for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output.
- The 12832 display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface.
- The 0.91 display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver.
- 0.91 oled compatible with ESP8266, ESP32, STM32, etc
- 0.91 inch OLED display, no need backlight, self-illumination, Display Color : Blue, Resolution: 128 x 32.
ideaspark 3Pcs 0.96 Inch OLED Display 3-Colors 128x64 SSD1306 SPI I2C IIC Serial LCD Screen Module Board with 4 Pins Soldered and 10 Dupont Cable Work Great with Arduino for Raspberry Pi
Main highlights- Resolution: 128 x 64, View angle: > 160°,Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Package List: 1 x Yellow-Blue OLED display,1 x White OLED display,1 x Blue OLED display,10 x Female to Female Dupont Cable,1 x Storage Box
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- Embedded Driver IC: SSD1306.Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. Work great for Arduino UNO and Mega, for Raspberry pi, 51 MCU, STM 32,etc
Teyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Main highlights- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
Teyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Main highlights- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- Pin Definition: VCC,GND,SCL, SDA
HiLetgo 1.5" SH1107 128x128 OLED Display Module 1.5 Inch IIC I2C 4 Pin OLED Screen LCD Display White
Main highlights- Suitable for Arduino / Raspberry Pi / STM32 etc Display
- High resolution: 128×128; Display color: White
- Chip IC: SSH1107; Interface: IIC/SPI optional
- 1.5" SSH1107 OLED Display Module 128x128
HiLetgo 2.42" SSD1309 128x64 OLED Display Module 2.42 Inch OLED LCD Display Module IIC I2C 4 Pin or SPI 7 Pin Optional
Main highlights- IC I2C 4 Pin and SPI 7 Pin Optional
- Driver IC: SSD1309; Dot Matrix: 128x64
- Display color: Blue/Green/White/Yellow Optional
- 2.42" SSD1309 128x64 OLED Display Module
Hosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
ACEIRMC 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 (Yellow)
Main highlights- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- Driver IC: SSD1309
- Diagonal Screen Size: 2.42 inch
- 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 12864 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 C51
Teyleten Robot 0.91 inch OLED LCD Display Module SSD1306 IIC 128x32 LCD OLED Screen 3.3V~5V 4PIN for Arduino White 5PCS
Main highlights- Resolution: 128 x 32 IIC interface Display
- Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line
- OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
- Driver IC: SSD1306
Black Friday Sale
Deal ends in
HrsMinSec