10 Best Inverter Grid Tie In The Us - Black Friday 2024
Grid Tie/Off-Grid 10000W Split-Phase Solar Inverter 48V to 120V/240V, UL1741 Solar Hybrid Inverter 10KW Built-in WiFi and 200A MPPT Controller, Up to 6 Unit in Parallel, Support Batteryless Run
Main highlights- 【Widely Used】The hybrid inverter is ideal for grid on and off-grid backup and self-use applications. Widely used for home, cabin, camper, RV, trailer, boat, and so on and used as backup supply while utility outages
- 【Three Operation Modes and Priority be Set】This 10KW Power Inverter Charger has three operation modes: Grid-tie with backup, Off Grid, and Grid Tie. PV power can feed back to the grid, provide power to the load, and charge the battery. Four options are available in this mode: Grid-tie with backup I, II, III, and IV. In this mode, users can configure PV power supply priority, charging source priority, and load supply source priority
- 【Technical Specification】Hybrid Inverter built-in dual 100A MPPT controller and 10KW Pure sine wave inverter. Supports two sets of solar panel array inputs and simultaneously tracks the maximum power charging/carrying capacity of two solar energy sources. With a rated output power of 10000W (surge 20000W) and compatibility with various voltage outputs (120/208/240Vac), it ensures reliable performance. Max.PV Input Power: 12KW(6000*2), Max.PV input Voltage: 600Vdc, Max.PV input current: 2 x 18A (MAX 30A), PV Starting voltage ≥150V, PV Wire Size:10AWG. Max. Battery Charging Current:200A
- 【Only need 1 10k inverter can output 120V/240V】Split-phase Solar Inverter 48V support split-phase and single-phase pure sine wave output. Support parallel operation for capacity expansion up to 60kW, max 6 power inverter parallel
- 【Hybrid Solar Inverter】This split-phase solar inverter seamlessly integrates on-grid and off-grid capabilities, harnessing power from PV solar modules, batteries, and the utility to provide continuous electricity to connected loads. It can both feed the grid (utility) and charge batteries, optimizing power generation based on varying conditions
- 【Compatible with Various Batteries】10000W split-phase solar inverter 48V is compatible with Lead-acid (Seal, AGM, Gel, Flooded) and Lithium batteries, and supports batteryless. Supports solar, utility, or generator power to charge the battery. It can flexibly schedule the Inverter charging and discharging time. With a dual activation function when the Li-ion battery is dormant; either mains / photovoltaic power supply access can trigger the activation of the Li-ion battery
- 【Certified Safety and Reliability】This 10K solar inverter is UL1741 and IEEE1547 certified, offering complete protection features such as short circuit, over-current, over-under voltage, overload, and backfill protection. Its ETL certification ensures compliance with industry standards, providing peace of mind for users while saving on electric bills and preparing for power outages. Widely applicable for residential and recreational settings, it serves as a reliable backup power supply during utility outages
- Curious about how we select the top products for you? Explore How It Works
Y&H 1000W Grid Tie Inverter Power Limiter DC25-60V Solar Input AC110V/240V Auto Switch
9.3 worth the money9.3 Easy installation8.0 Simple to useWhy we love it
Reduces electricity costs with peak load management.Displays comprehensive real-time system data.Auto-regulates battery discharge for optimal performance.Y&H Grid Tie Inverter 600W Stackable DCDC15-28V PV Input AC110V MPPT Pure Sine Wave Micro Inverter fit for 12V Solar Panel/24V Battery
9.1 Simple to use8.2 Durability8.0 Temperature controlWhy we love it
Easy to install and use.Works efficiently with 600W solar systems.Helps reduce electricity bills.Y&H 1400W Grid Tie Inverter Stackable MPPT Pure Sine Wave DC16-28V Solar Input AC90-140V Output for 12V Solar Panel
Main highlights- 【About After-sales Service】We will provide you with the necessary technical support to ensure smooth operation and use of our product. If you have any questions after receiving the product, please feel free to contact us. Your support means a lot to us, and we are dedicated to ensuring that you have a good product experience at Y&H.
- Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency【Red / green lights flash alternating. This is the solar panel power or voltage is too low】
- Please note: Do not use it together with a bidirectional meter in the local power grid. This is because the excess power from the inverter will be fed back into the grid, resulting in increased electricity costs. For a bidirectional power grid, we recommend using our SUN-Inverter series.
- Micro Inverter Max Power Point Tracking and Stackable,Island Protection. If the DC connection is loose and causes a short circuit, then smoke may be emitted.The inverter adopts aluminum alloy casing, so there is no fire.
- Micro Grid Tie Inverter Doesn't work with 12V battery【Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection】
- Grid Tie Inverter MPPT Range 15.5-23V【DO NOT use solar controller load ports to connect to the inverter】
- 200W-1700W Solar Panel:Vmp: 18-21V, Voc: 20-24V【Please do not use other voltage input, for example: (10.8V-15V)and (25-30V)】The DC positive and negative connections are reversed, and the inverter Led will not light up.
TINGEN 1200W Grid Tie Inverter with LCD Solar Panel Input 55V-90V Battery Voltage Input 48V AC Output 90V-140V
Main highlights- High Quality:This grid tie inverter made of aluminum shell which is hard, it is difficult to damaged. On grid inverter build in fans and aluminum shell which makes it fastly dissipating the heat
- High Efficiency(Inverter build in MPPT):MPPT efficiency is above 99%.Advanced Maximum power point tracking (MPPT) to ensure the high efficiency of system.High-efficiency and frequency transformer,sufficient patents
- Easy to Operate: This on grid inverter have LCD display, you can see the parameters on the display, clearly show AC DC input output parameters. There are four working model(normal PV mode, PV limiter mode, battery CP mode and battery limiter mode), you can set it by yourself
- Application: Solar panel input 55-90V, if you want to connect to battery, this grid-tied inverter battery voltage is 48V.AC output 90V-140V single phase. Of course the grid-connected inverter can be applied to(such as various types of photovoltaic modules, various types of batteries,DC switching power supplies, DC motors, etc.) in the grid feed system or power supply type of load discharge, aging test and other systems
5000W DC 48V Pure Sine Wave Solar Inverter,100A MPPT Solar Charger and 40A AC Battery Charger, 120V AC Output Hybrid Solar inverter Charger Manufactured by SunGoldPowerCo.,Ltd (Parallel & Grid-tied)
9.3 Easy installation8.9 Tech Support8.2 worth the moneyWhy we love it
Versatile all-in-one solar charge inverter solution.Easily expandable with parallel kit for more power.Stable AC output for various household appliances.
Black Friday Sale
Deal ends in
HrsMinSec